Vodafone Smart Ultra 6 please add it to supported devices or how it will?

[CyberMan571]

Hello Good Friends! if I give a sensitive info that without knowing, and this is no important!

I have falsely delete all emmc partitions. for VSU6, original brand is zte. FTM mode has not actived but edm or edl has been active!

the phone the phone has been flashed with unauthorized software and is locked has been flashed with unauthorized software and is locked this warning was given the phone during power on

I have mbn files, how can I also use the files as loader? How to converted mbn files to bin loader file

Thanks to reading Thanks to your helping

[danielkutik]

the files starting with prog_emmcfirehose*.mbn look relevant here. copy them into a folder and then follow these instructions: https://github.com/bkerler/edl#install-edl-loaders

[CyberMan571]

Thanks to reply I did what is called, but I have encountered such errors. python3 -m pip install -r requirements.txt I did install which are the requirement

Capstone library is missing. Keystone library is missing.

these errors still was going however it has gone them when I installed the following

sudo apt install python3-keystone -y sudo apt install python3-capstone -y sudo apt install python-wheel-common -y sudo apt install python3-usb1 -y sudo apt install python3-docopt -y sudo dpkg -i /media/kali/Seagete_Expansion_Drive/ali/telefon-flash/edl/first-install/python-lzma_0.5.3-4_amd64.deb sudo apt install python3-lxml -y sudo apt install python3-colorama -y

[CyberMan571]

What error could cause this? so I uploaded all the requested ones. But I keep getting this error!
Library Appears Not Installed.

[bkerler]

It looks like you reconnected 9008 port. A reconnect won't work if sahara failed. Start the edl.py client and then reboot the device into 9008 (disconnect battery if possible or use hardreset via button)

[CyberMan571]

I have waiting as 15-20 minutes, it has being able to reconnect .

firehose - [LIB]: Error:{}

firehose_client - [qfil] programming /media/kali/Seagete_Expansion_Drive/ali/Vodafone_Smart_Ultra_6_Stock_Rom-5.1/Firmware1/tz.mbn to @.***(114688)... firehose -

tz.mbn TZ.MBN is continually reinstalling. I have encounter an error here.

for PYUSB, was said page it that is had been incompatible with Python3.9. I have install python3-usb/kali-rolling,now 1.0.2-2

I will let you know from improvements, I would like to be turned off when a successful flashing is. folks-humans can learn something. Bjoern Kerler @.***>, 9 Nis 2021 Cum, 19:52 tarihinde şunu yazdı:

It looks like you reconnected 9008 port. A reconnect won't work if sahara failed. Start the edl.py client and then reboot the device into 9008 (disconnect battery if possible or use hardreset via button)

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bkerler/edl/issues/69#issuecomment-816931303, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHKVTJ7FHZWJJYWZGGL5XITTH5LIBANCNFSM42RWRBOA .

[CyberMan571]

python3 edl.py w boot_a ./Firmware1/boot.img --loader=./Loaders/loaders/0090b0e100040000_9764995d53559360_fhprg_peek.bin --memory=eMMC ( --skipresponse(the caused)) This Example of code has giving this error code is USBError(75, 'Overflow') <class 'usb.core.USBError'> 75.

[CyberMan571]

Hey Dear Friends; I have meeting edl authorization problem with VSU 6 (original brand of ZTE blade s6 plus) I have receiving(confront) it similar which are "Read back verify failed at sector 1876912573,num sectors 131072" How to I have able to over bypass Qualcomm edl authorization

[bkerler]

Sorry, but vip and edl auth for ZTE aren't planned for now

[CyberMan571]

that was not good at all! How can I get the necessary information. collecting information from the phone for example auth. It may even be private. In this way, both the project is developed. and people like to work more.

[CyberMan571]

(qfil)log.txt [Errno 110] Operation timed out how to solve timed out and gpt table fixing

[CyberMan571]

Thanks, I tested on ubuntu, and same problem. I have understood needing a problemless os and must learning reverse engineer to solving the problem.

Bjoern Kerler @.***>, 5 Ağu 2021 Per, 10:15 tarihinde şunu yazdı:

Closed #69 https://github.com/bkerler/edl/issues/69.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bkerler/edl/issues/69#event-5116551681, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHKVTJ66DKG2MM5NBXFQRITT3JQCLANCNFSM42RWRBOA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email .

[CyberMan571]

@bkerler/edl @.***> I tested on a live ubuntu os

Ali @.***>, 7 Ağu 2021 Cmt, 04:36 tarihinde şunu yazdı:

Thanks, I tested on ubuntu, and same problem. I have understood needing a problemless os and must learning reverse engineer to solving the problem.

Bjoern Kerler @.***>, 5 Ağu 2021 Per, 10:15 tarihinde şunu yazdı:

Closed #69 https://github.com/bkerler/edl/issues/69.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bkerler/edl/issues/69#event-5116551681, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHKVTJ66DKG2MM5NBXFQRITT3JQCLANCNFSM42RWRBOA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email .