NasiGorengBurung
commented
2 weeks ago My man, what is the solution?
Closed triloksh07 closed 4 months ago
NasiGorengBurung
commented
2 weeks ago My man, what is the solution?
Edited
Update - this problem has been solved.
the error i was getting probably is due to drivers / boot.img file after changing that it worked and i am able to flash boot + recovery, through MTK client tool. If anyone face the same issue or something else can msg me. Thank you !
What is the problem ? my device get into boot loop after flashing a PBRP ( pitch black recovery ) and booted to it directly, and now my device is not getting into fastboot mode nor recovery, so i am trying MTK tool to re flash boot img.
After successfully setup all the drivers and tool when connected my device to pc it started flashing but after few minutes getting error
Cmd terminal O/P -
Port - Hint:
Power off the phone before connecting. For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb. For preloader mode, don't press any hw button and connect usb.
.......Port - Device detected :) Preloader - CPU: MT6768(Helio P65/G85 k68v1) Preloader - HW version: 0x0 Preloader - WDT: 0x10007000 Preloader - Uart: 0x11002000 Preloader - Brom payload addr: 0x100a00 Preloader - DA payload addr: 0x201000 Preloader - CQ_DMA addr: 0x10212000 Preloader - Var1: 0x25 Preloader - Disabling Watchdog... Preloader - HW code: 0x707 Preloader - Target config: 0xe5 Preloader - SBC enabled: True Preloader - SLA enabled: False Preloader - DAA enabled: True Preloader - SWJTAG enabled: True Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False Preloader - Root cert required: False Preloader - Mem read auth: True Preloader - Mem write auth: True Preloader - Cmd 0xC8 blocked: True Preloader - HW subcode: 0x8a00 Preloader - HW Ver: 0xca00 Preloader - SW Ver: 0x0 Preloader - ME_ID: A00E0C1036282214D8D53E961AAC4B11 Preloader - SOC_ID: F4F0D7468D75EB31688B445ADDA41DE1BA8C07A9A8ACA88310C6B35A0046E139 PLTools - Loading payload from mt6768_payload.bin, 0x264 bytes PLTools - Kamakiri / DA Run Kamakiri - Trying kamakiri2.. Kamakiri - Done sending payload... PLTools - Successfully sent payload: F:\mtkclient-main\mtkclient-main\mtkclient\payloads\mt6768_payload.bin Port - Device detected :) Main - Device is protected. Main - Device is in BROM mode. Trying to dump preloader. DAXFlash - Uploading stage 1 from MTK_AllInOne_DA_5.2136.bin DAXFlash - Successfully uploaded stage 1, jumping .. Preloader - Jumping to 0x200000 Preloader - Jumping to 0x200000: ok. DAXFlash - Successfully received DA sync DAXFlash - DRAM config needed for : 90014a6843396150 DAXFlash - Sending emi data ... DAXFlash - Sending emi data succeeded. DAXFlash - Uploading stage 2... DAXFlash - Successfully uploaded stage 2 DAXFlash - EMMC FWVer: 0x0 DAXFlash - EMMC ID: hC9aP3 DAXFlash - EMMC CID: 90014a6843396150330143a9e48f27cd DAXFlash - EMMC Boot1 Size: 0x400000 DAXFlash - EMMC Boot2 Size: 0x400000 DAXFlash - EMMC GP1 Size: 0x0 DAXFlash - EMMC GP2 Size: 0x0 DAXFlash - EMMC GP3 Size: 0x0 DAXFlash - EMMC GP4 Size: 0x0 DAXFlash - EMMC RPMB Size: 0x1000000 DAXFlash - EMMC USER Size: 0xe8f800000 DAXFlash - DA-CODE : 0x70E0 DAXFlash - DA Extensions successfully added Progress: |██████--------------------------------------------| 12.5% Write (Sector 0x2000 of 0x10000, 08s left) 3.05 MB/Progress: |█████████-----------------------------------------| 18.8% Write (Sector 0x3000 of 0x10000, 07s left) 3.90 MB/Progress: |████████████--------------------------------------| 25.0% Write (Sector 0x4000 of 0x10000, 06s left) 3.75 MB/Progress: |████████████████----------------------------------| 31.2% Write (Sector 0x5000 of 0x10000, 06s left) 3.71 MB/susb_class - USBError(5, 'Input/Output Error') DAXFlash DAXFlash - [LIB]: unpack requires a buffer of 12 bytes Failed to write boot.img to sector 3592192 with sector count 65536.
F:\mtkclient-main\mtkclient-main>