Preloader - Status: Waiting for PreLoader VCOM, please connect mobile
Port - Hint:
Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
....Port - Device detected :)
Preloader - CPU: MT6753()
Preloader - HW version: 0x0
Preloader - WDT: 0x10212000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10217c00
Preloader - Var1: 0x28
Preloader - Disabling Watchdog...
Preloader - HW code: 0x337
Preloader - Target config: 0x0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 96E950EDAA10A8C97A16AA5ABB868262
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt6753_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: D:\桌面\mtkclient-main\mtkclient\payloads\mt6753_payload.bin
Port - Device detected :)
DA_handler
DA_handler - [LIB]: [33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.[0m
Successfully extracted preloader for this device to: preloader_gnbj6753_66t_l1.bin
DALegacy - Uploading legacy da...
DALegacy - Uploading legacy stage 1 from MTK_AllInOne_DA_5.2152.bin
legacyext - Legacy DA2 is patched.
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info
DALegacy - Reading emmc info
DALegacy - Setting stage 2 config ...
DALegacy - DRAM config needed for : 520001154d313238578c0042778413ca
DALegacy - Reading dram nand info ...
DALegacy - Sending dram info ...
DALegacy - M_EXT_RAM_RET : 0
DALegacy - M_EXT_RAM_TYPE : 0x2
DALegacy - M_EXT_RAM_CHIP_SELECT : 0x0
DALegacy - M_EXT_RAM_SIZE : 0x80000000
DALegacy - Uploading stage 2...
DALegacy - Successfully uploaded stage 2
DALegacy - Connected to preloader
DALegacy - Reconnecting to preloader
DALegacy - Connected to preloader
DALegacy - m_int_sram_ret = 0x0
m_int_sram_size = 0x20000
m_ext_ram_ret = 0x0
m_ext_ram_type = 0x2
m_ext_ram_chip_select = 0x0
m_int_sram_ret = 0x0
m_ext_ram_size = 0x80000000
randomid = 0x55FD0A85F7361328F47E8566D41DC6A0
momo54181
commented
2 years ago
`MTK Flash/Exploit Client V1.55 (c) B.Kerler 2018-2022
Preloader - Status: Waiting for PreLoader VCOM, please connect mobile
Port - Hint:
Power off the phone before connecting. For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb. For preloader mode, don't press any hw button and connect usb.
....Port - Device detected :) Preloader - CPU: MT6753() Preloader - HW version: 0x0 Preloader - WDT: 0x10212000 Preloader - Uart: 0x11002000 Preloader - Brom payload addr: 0x100a00 Preloader - DA payload addr: 0x201000 Preloader - CQ_DMA addr: 0x10217c00 Preloader - Var1: 0x28 Preloader - Disabling Watchdog... Preloader - HW code: 0x337 Preloader - Target config: 0x0 Preloader - SBC enabled: False Preloader - SLA enabled: False Preloader - DAA enabled: False Preloader - SWJTAG enabled: False Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False Preloader - Root cert required: False Preloader - Mem read auth: False Preloader - Mem write auth: False Preloader - Cmd 0xC8 blocked: False Preloader - Get Target info Preloader - BROM mode detected. Preloader - HW subcode: 0x8a00 Preloader - HW Ver: 0xca00 Preloader - SW Ver: 0x0 Preloader - ME_ID: 96E950EDAA10A8C97A16AA5ABB868262 DA_handler - Device is unprotected. DA_handler - Device is in BROM-Mode. Bypassing security. PLTools - Loading payload from mt6753_payload.bin, 0x258 bytes PLTools - Kamakiri / DA Run Kamakiri - Trying kamakiri2.. Kamakiri - Done sending payload... PLTools - Successfully sent payload: D:\桌面\mtkclient-main\mtkclient\payloads\mt6753_payload.bin Port - Device detected :) DA_handler DA_handler - [LIB]: [33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.[0m Successfully extracted preloader for this device to: preloader_gnbj6753_66t_l1.bin DALegacy - Uploading legacy da... DALegacy - Uploading legacy stage 1 from MTK_AllInOne_DA_5.2152.bin legacyext - Legacy DA2 is patched. Preloader - Jumping to 0x200000 Preloader - Jumping to 0x200000: ok. DALegacy - Got loader sync ! DALegacy - Reading nand info DALegacy - Reading emmc info DALegacy - Setting stage 2 config ... DALegacy - DRAM config needed for : 520001154d313238578c0042778413ca DALegacy - Reading dram nand info ... DALegacy - Sending dram info ... DALegacy - M_EXT_RAM_RET : 0 DALegacy - M_EXT_RAM_TYPE : 0x2 DALegacy - M_EXT_RAM_CHIP_SELECT : 0x0 DALegacy - M_EXT_RAM_SIZE : 0x80000000 DALegacy - Uploading stage 2... DALegacy - Successfully uploaded stage 2 DALegacy - Connected to preloader DALegacy - Reconnecting to preloader DALegacy - Connected to preloader DALegacy - m_int_sram_ret = 0x0 m_int_sram_size = 0x20000 m_ext_ram_ret = 0x0 m_ext_ram_type = 0x2 m_ext_ram_chip_select = 0x0 m_int_sram_ret = 0x0 m_ext_ram_size = 0x80000000 randomid = 0x55FD0A85F7361328F47E8566D41DC6A0
m_emmc_ret = 0x0 m_emmc_boot1_size = 0x400000 m_emmc_boot2_size = 0x400000 m_emmc_rpmb_size = 0x400000 m_emmc_gp_size[0] = 0x0 m_emmc_gp_size[1] = 0x0 m_emmc_gp_size[2] = 0x0 m_emmc_gp_size[3] = 0x0 m_emmc_ua_size = 0x3a3e00000 m_emmc_cid = 3832314d15010052ca13927742008c57 m_emmc_fwver = 0000000000000000
Done |--------------------------------------------------| 0.0% Read (Sector 0x0 of 0x400) 0.00 MB/sDA_handler DA_handler - [LIB]: [31mUnknown seccfg partition header. Aborting unlock.[0m`