[FATAL ERROR] Nokia 3.1 2gb mtk worked, mtk_gui not worked

Version from master branch

python mtk_gui --preloader mtkclient\Loader\Preloader\preloader_es2.bin

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

Port - Device detected :)
Preloader -     CPU:                    MT6755/MT6750/M/T/S(Helio P10/P15/P18)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212c00
Preloader -     Var1:                   0xa
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x326
Preloader - Target config:              0x1
Preloader -     SBC enabled:            True
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            False
Preloader -     SWJTAG enabled:         False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          False
Preloader -     Mem write auth:         False
Preloader -     Cmd 0xC8 blocked:       False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xcb00
Preloader -     SW Ver:                 0x1
Preloader - ME_ID:                      CFF3FD04E213567A5BC5428641D9BA32
Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

python mtk da seccfg unlock --preloader mtkclient\Loader\Preloader\preloader_es2.bin

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

.Port - Device detected :)
Preloader -     CPU:                    MT6755/MT6750/M/T/S(Helio P10/P15/P18)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212c00
Preloader -     Var1:                   0xa
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x326
Preloader - Target config:              0x1
Preloader -     SBC enabled:            True
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            False
Preloader -     SWJTAG enabled:         False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          False
Preloader -     Mem write auth:         False
Preloader -     Cmd 0xC8 blocked:       False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xcb00
Preloader -     SW Ver:                 0x1
Preloader - ME_ID:                      CFF3FD04E213567A5BC5428641D9BA32
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt6755_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Users\Admin\Downloads\mtkclient-main\mtkclient\payloads\mt6755_payload.bin
Port - Device detected :)
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2152.bin
xflashext - Patching da1 ...
Mtk - Patched "Patched loader msg" in preloader
xflashext
xflashext - [LIB]: ←[33mError on patching da1 version check...←[0m
Mtk - Patched "Patched loader msg" in preloader
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup passed.
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - EMMC FWVer:      0x0
DAXFlash - EMMC ID:         QE63MB
DAXFlash - EMMC CID:        150100514536334d4203e2f0073a55e1
DAXFlash - EMMC Boot1 Size: 0x400000
DAXFlash - EMMC Boot2 Size: 0x400000
DAXFlash - EMMC GP1 Size:   0x0
DAXFlash - EMMC GP2 Size:   0x0
DAXFlash - EMMC GP3 Size:   0x0
DAXFlash - EMMC GP4 Size:   0x0
DAXFlash - EMMC RPMB Size:  0x400000
DAXFlash - EMMC USER Size:  0x3a3e00000
DAXFlash - HW-CODE         : 0x6750
DAXFlash - HWSUB-CODE      : 0x8A00
DAXFlash - HW-VERSION      : 0xCB00
DAXFlash - SW-VERSION      : 0x1
DAXFlash - CHIP-EVOLUTION  : 0x0
DAXFlash - DA-VERSION      : 1.0
DAXFlash - Reconnecting to preloader
DAXFlash - Connected to preloader
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - DA Extensions successfully added
sej - HACC init
sej - HACC run
sej - HACC terminate
sej - HACC init
sej - HACC run
sej - HACC terminate
Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x1 of 0x1, ) 0.00 MB/s
DA_handler - Successfully wrote seccfg.

bkerler / mtkclient

[FATAL ERROR] Nokia 3.1 2gb mtk worked, mtk_gui not worked #558