search

bkerler / mtkclient

MTK reverse engineering and flash tool
GNU General Public License v3.0
2.67k stars 525 forks source link

[MT6768] DAA_SIG_VERIFY_FAILED #676

Closed Ella-Alinda closed 1 year ago

Ella-Alinda commented 1 year ago

I want unlock vivo Y5s Bootloader, mtkclient back some message, last disconnect.

...........

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

Port - Device detected :)
Preloader -     CPU:                    MT6768/MT6769(Helio P65/G85 k68v1)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212000
Preloader -     Var1:                   0x25
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x707
Preloader - Target config:              0x5
Preloader -     SBC enabled:            True
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            True
Preloader -     SWJTAG enabled:         True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          False
Preloader -     Mem write auth:         False
Preloader -     Cmd 0xC8 blocked:       False
Preloader - Get Target info
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
Mtk - We're not in bootrom, trying to crash da...
PLTools - Crashing da...
Preloader
Preloader - [LIB]: upload_data failed with error: DAA_SIG_VERIFY_FAILED (0x7024)
Preloader
Preloader - [LIB]: Error on uploading da data
Preloader - Jumping to 0x0
Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

......Port - Device detected :)
Preloader -     CPU:                    MT6768/MT6769(Helio P65/G85 k68v1)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212000
Preloader -     Var1:                   0x25
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x707
Preloader - Target config:              0x5
Preloader -     SBC enabled:            True
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            True
Preloader -     SWJTAG enabled:         True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          False
Preloader -     Mem write auth:         False
Preloader -     Cmd 0xC8 blocked:       False
Preloader - Get Target info
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
PLTools - Crashing da...
DeviceClass - USBError(19, 'No such device (it may have been disconnected)')
Preloader
Preloader - [LIB]: Error on DA_Send cmd
Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

..........Preloader
Preloader - [LIB]: Status: Handshake failed, retrying...

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.
bkerler commented 1 year ago

You need to use the brom, not preloader mode.