Stuck at DAXFlash - DA Extensions successfully added

[farizazizov]

**`..........Port - Device detected :) Preloader - CPU: MT6765/MT8768t(Helio P35/G35) Preloader - HW version: 0x0 Preloader - WDT: 0x10007000 Preloader - Uart: 0x11002000 Preloader - Brom payload addr: 0x100a00 Preloader - DA payload addr: 0x201000 Preloader - CQ_DMA addr: 0x10212000 Preloader - Var1: 0x25 Preloader - Disabling Watchdog... Preloader - HW code: 0x766 Preloader - Target config: 0xe5 Preloader - SBC enabled: True Preloader - SLA enabled: False Preloader - DAA enabled: True Preloader - SWJTAG enabled: True Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False Preloader - Root cert required: False Preloader - Mem read auth: True Preloader - Mem write auth: True Preloader - Cmd 0xC8 blocked: True Preloader - Get Target info Preloader - BROM mode detected. Preloader - HW subcode: 0x8a00 Preloader - HW Ver: 0xca00 Preloader - SW Ver: 0x0 Preloader - ME_ID: 4C2A2CEFB31FF0A7B33469F6CAD49022 Preloader - SOC_ID: B422C4AD5C56B5D4B52E8D247ACA2C17FFAEAF8668EBBCFF0CC9A552184F7C6A Preloader - Status: Waiting for PreLoader VCOM, please connect mobile Preloader Preloader - [LIB]: Status: Handshake failed, retrying...

Port - Hint:

Power off the phone before connecting. For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb. For preloader mode, don't press any hw button and connect usb. If it is already connected and on, hold power for 10 seconds to reset.

....Port - Device detected :) Preloader - CPU: MT6765/MT8768t(Helio P35/G35) Preloader - HW version: 0x0 Preloader - WDT: 0x10007000 Preloader - Uart: 0x11002000 Preloader - Brom payload addr: 0x100a00 Preloader - DA payload addr: 0x201000 Preloader - CQ_DMA addr: 0x10212000 Preloader - Var1: 0x25 Preloader - Disabling Watchdog... Preloader - HW code: 0x766 Preloader - Target config: 0xe5 Preloader - SBC enabled: True Preloader - SLA enabled: False Preloader - DAA enabled: True Preloader - SWJTAG enabled: True Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False Preloader - Root cert required: False Preloader - Mem read auth: True Preloader - Mem write auth: True Preloader - Cmd 0xC8 blocked: True Preloader - Get Target info Preloader - BROM mode detected. Preloader - HW subcode: 0x8a00 Preloader - HW Ver: 0xca00 Preloader - SW Ver: 0x0 Preloader - ME_ID: 4C2A2CEFB31FF0A7B33469F6CAD49022 Preloader - SOC_ID: B422C4AD5C56B5D4B52E8D247ACA2C17FFAEAF8668EBBCFF0CC9A552184F7C6A Port - Device detected :) DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2228.bin xflashext - Patching da1 ... xflashext xflashext - [LIB]: Error on patching da1 version check... xflashext - Patching da2 ... DAXFlash - Successfully uploaded stage 1, jumping .. Preloader - Jumping to 0x200000 Preloader - Jumping to 0x200000: ok. DAXFlash - Successfully received DA sync DAXFlash - DRAM config needed for : 150100445836384d DAXFlash - Sending emi data ... DAXFlash - DRAM setup passed. DAXFlash - Sending emi data succeeded. DAXFlash - Uploading stage 2... DAXFlash - Upload data was accepted. Jumping to stage 2... DAXFlash - Successfully uploaded stage 2 DAXFlash - EMMC FWVer: 0x0 DAXFlash - EMMC ID: DX68MB DAXFlash - EMMC CID: 150100445836384d4200c20fd049b785 DAXFlash - EMMC Boot1 Size: 0x400000 DAXFlash - EMMC Boot2 Size: 0x400000 DAXFlash - EMMC GP1 Size: 0x0 DAXFlash - EMMC GP2 Size: 0x0 DAXFlash - EMMC GP3 Size: 0x0 DAXFlash - EMMC GP4 Size: 0x0 DAXFlash - EMMC RPMB Size: 0x1000000 DAXFlash - EMMC USER Size: 0x747c00000 DAXFlash - HW-CODE : 0x766 DAXFlash - HWSUB-CODE : 0x8A00 DAXFlash - HW-VERSION : 0xCA00 DAXFlash - SW-VERSION : 0x0 DAXFlash - CHIP-EVOLUTION : 0x0 DAXFlash - DA-VERSION : 1.0 DAXFlash - Upload data was accepted. Jumping to stage 2... DAXFlash - DA Extensions successfully added`**

[Theoldnation]

Same on redmi 9

[fipso]

Same on Nokia 5.1

Port - Device detected :)
Preloader -     CPU:            MT6755/MT6750/M/T/S(Helio P10/P15/P18)
Preloader -     HW version:     0x0
Preloader -     WDT:            0x10007000
Preloader -     Uart:           0x11002000
Preloader -     Brom payload addr:  0x100a00
Preloader -     DA payload addr:    0x201000
Preloader -     CQ_DMA addr:        0x10212c00
Preloader -     Var1:           0xa
Preloader - Disabling Watchdog...
Preloader - HW code:            0x326
Preloader - Target config:      0x1
Preloader -     SBC enabled:        True
Preloader -     SLA enabled:        False
Preloader -     DAA enabled:        False
Preloader -     SWJTAG enabled:     False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required: False
Preloader -     Mem read auth:      False
Preloader -     Mem write auth:     False
Preloader -     Cmd 0xC8 blocked:   False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:     0x8a00
Preloader -     HW Ver:         0xcb00
Preloader -     SW Ver:         0x1
Preloader - ME_ID:          DCCE2645DD6CB1C8B62ED10BA3DE163D
Port - Device detected :)
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin
xflashext - Patching da1 ...
xflashext
xflashext - [LIB]: Error on patching da1 version check...
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup passed.
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - EMMC FWVer:      0x0
DAXFlash - EMMC ID:         HAG4a2
DAXFlash - EMMC CID:        90014a484147346132a51e2849071505
DAXFlash - EMMC Boot1 Size: 0x400000
DAXFlash - EMMC Boot2 Size: 0x400000
DAXFlash - EMMC GP1 Size:   0x0
DAXFlash - EMMC GP2 Size:   0x0
DAXFlash - EMMC GP3 Size:   0x0
DAXFlash - EMMC GP4 Size:   0x0
DAXFlash - EMMC RPMB Size:  0x400000
DAXFlash - EMMC USER Size:  0x3ab400000
DAXFlash - HW-CODE         : 0x6750
DAXFlash - HWSUB-CODE      : 0x8A00
DAXFlash - HW-VERSION      : 0xCB00
DAXFlash - SW-VERSION      : 0x1
DAXFlash - CHIP-EVOLUTION  : 0x0
DAXFlash - DA-VERSION      : 1.0
DAXFlash - Reconnecting to stage2 with higher speed
DeviceClass - [Errno 2] Entity not found
DAXFlash - Connected to stage2 with higher speed
DAXFlash - Extensions were accepted. Jumping to extensions...
DAXFlash - DA Extensions successfully added
D
Port - Device detected :)
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2136.bin
xflashext - Patching da1 ...
xflashext
xflashext - [LIB]: Error on patching da1 version check...
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup passed.
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - EMMC FWVer:      0x0
DAXFlash - EMMC ID:         HAG4a2
DAXFlash - EMMC CID:        90014a484147346132a51e2849071505
DAXFlash - EMMC Boot1 Size: 0x400000
DAXFlash - EMMC Boot2 Size: 0x400000
DAXFlash - EMMC GP1 Size:   0x0
DAXFlash - EMMC GP2 Size:   0x0
DAXFlash - EMMC GP3 Size:   0x0
DAXFlash - EMMC GP4 Size:   0x0
DAXFlash - EMMC RPMB Size:  0x400000
DAXFlash - EMMC USER Size:  0x3ab400000
DAXFlash - HW-CODE         : 0x6750
DAXFlash - HWSUB-CODE      : 0x8A00
DAXFlash - HW-VERSION      : 0xCB00
DAXFlash - SW-VERSION      : 0x1
DAXFlash - CHIP-EVOLUTION  : 0x0
DAXFlash - DA-VERSION      : 1.0
DAXFlash - Reconnecting to stage2 with higher speed
DeviceClass - [Errno 2] Entity not found
DAXFlash - Connected to stage2 with hi

[bkerler]

Say hello to the new security level that mtk introduced. You will need a new da loader (no auth).

[bkerler]

In case it's not a new security, try to skip the reconnect using --noreconnect

[farizazizov]

In case it's not a new security, try to skip the reconnect using --noreconnect

How to type this command while mtk_gui?

[bkerler]

Is this related to the GUI ?

[farizazizov]

Is this related to the GUI ?

Yes,exactly.Only on GUI it stucks

[Theoldnation]

use the normal mtkclient instead gui is kinda buggy on windows

[farizazizov]

SOLVED: Formatted PC and Changed Windows 11 Pro to Windows 11 Home.Now works like a charm.Thanks :)