(MT6895) DAA_Security_Error (0x7017)

[catcatcatcatcatcatcatcatcatcatmeow]

PC : WIndows 11 Pro 10.0.22621.2861 Phone: Xiaomi 12T MIUI 14.0.7 Android 14

connected phone using mtkgui.bat

error output:
...Preloader -  CPU:                    MT6895(Dimensity 8100)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x1c007000
Preloader -     Uart:                   0x11001000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212000
Preloader -     Var1:                   0xa
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x1172
Preloader - Target config:              0xe7
Preloader -     SBC enabled:            True
Preloader -     SLA enabled:            True
Preloader -     DAA enabled:            True
Preloader -     SWJTAG enabled:         True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          True
Preloader -     Mem write auth:         True
Preloader -     Cmd 0xC8 blocked:       True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
Preloader - ME_ID:                      9B3A249BEE1C39D73A7C5C7CC4340021
Preloader - SOC_ID:                     A3279BCBDD750F0EEB8AF7B3AA1E1E6764DA9E84EB5C266D1DD94233F7EA1BE7
Preloader
Preloader - [LIB]: Send auth error:DAA_Security_Error (0x7017)

[gunawan092w]

i have a same phone. but i'm having the same problem as u too

[bkerler]

As stated in the readme (I'm sure you both read readme.md), MT6895 is NOT supported if DAA / SLA / SBC is enabled.

[gunawan092w]

possible to disable them?

[catcatcatcatcatcatcatcatcatcatmeow]

i just found this tutorial on how to disable them:

https://www.getdroidtips.com/disable-bypass-daa-sla-authentication-oppo/

Good Luck!

[gunawan092w]

if SP_Flash_Tool V6 have a UART Connection setting thing, this would be possible. but with V5, it's not compatible with MT6895

[catcatcatcatcatcatcatcatcatcatmeow]

eh

[gunawan092w]

._.