search

blackcryll / artisan

Automatically exported from code.google.com/p/artisan
0 stars 0 forks source link

error in fileload () 'module' object is not callable #25

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Cannot seem to be able to reopen any saved profiles.

Version 0.3.3 (Created with 0.3.3)

MAC OSX 10.6.6.. USER is with Admin rights.

Everytime I try to open one of the three profiles I just did, I get the error 
in fileload () 'module' object is not callable message

Thanks

Original issue reported on code.google.com by hugola...@gmail.com on 20 Feb 2011 at 4:36

GoogleCodeExporter commented 8 years ago 
And I just verified and was able to open the profile Probat from issue ID#20...

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:41

GoogleCodeExporter commented 8 years ago

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:52

Attachments:

GoogleCodeExporter commented 8 years ago 
And has to the Probat profile,  I was able to resave it to another name and 
reopen it

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:53

GoogleCodeExporter commented 8 years ago 
Investigating further. Just started a new profile. Didnt edit any of the roast 
properties.. just did a quick ON,CHARGE, ,FC,FCe, OFF. Saved it.. Same results.

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:04

GoogleCodeExporter commented 8 years ago 
And creating a new profile editing strickly the roast properties and saving 
works no problem.. So problem occurs when roast data exist

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:08

GoogleCodeExporter commented 8 years ago 
All configurations are at default. Temperature in Celcius mode. Device at none 
(manual)

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:25

GoogleCodeExporter commented 8 years ago 
seems like if I don't interpolate after the off function, everything is fine... 
The interpolation makes that profile unreadable from that point.

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:43

GoogleCodeExporter commented 8 years ago 
Quick test was opening the Probat profile discussed earlier.. Did an 
interpolate.. save.. and now can't reopen it

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:44

GoogleCodeExporter commented 8 years ago 
Issue 24 has been merged into this issue.

Original comment by luther.m...@gmail.com on 20 Feb 2011 at 4:23

GoogleCodeExporter commented 8 years ago 
Thanks for the detailed report. This would have been difficult to catch without 
it. Fixed in revision 229. Will be released with v0.3.4.

Original comment by luther.m...@gmail.com on 20 Feb 2011 at 4:24

GoogleCodeExporter commented 8 years ago 
Anyway my profiles that I've attached earlier can be rescued?

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:13

GoogleCodeExporter commented 8 years ago

Original comment by zaub...@yahoo.com on 20 Feb 2011 at 5:41

Attachments:

GoogleCodeExporter commented 8 years ago 
Rockin. Thank you. Got the OMEGA HH802 on order and looking forward to more 
experimentation with Artisan!!!
Hugo

Original comment by hugola...@gmail.com on 20 Feb 2011 at 6:39

GoogleCodeExporter commented 8 years ago 
And the OMEGA HH802U arrived. Plug and Play. First real time log for roast 
down!n Thank you for the support

Original comment by hugola...@gmail.com on 22 Feb 2011 at 12:19