Open chunmingwen opened 1 month ago
Hello, I don't use windows at all, in fact I don't have a windows machine. It may be that you are attempting to compile with the wrong libraries, can you check you are using the correct libraries, in that they match the ones I used ? Your error looks a bit like you haven't set up the cp_boards.h file for the blue pill stm32f103c8?
On Fri, 9 Aug 2024, 14:28 chunmingwen, @.***> wrote:
Arduino:1.8.19 (Windows 7), 開發板:"Generic STM32F1 series, BlackPill F103C8, STM32CubeProgrammer (SWD), Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), None, Newlib Nano (default)"
In file included from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/utility/CP_Firmata.h:17,
from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_Circuit_Playground.h:25, from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/Adafruit_CircuitPlayground.h:3, from C:\Users\wencm\Downloads\pcg850vs-sd-gadget-main\pcg850vs_gadget_1\pcg850vs_gadget_1.ino:7:
C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/utility/CP_Boards.h:746:2: error: #error "Please edit CP_Boards.h with a hardware abstraction for this board"
746 | #error "Please edit CP_Boards.h with a hardware abstraction for this board"
| ^~~~~
exit status 1
開發板 Generic STM32F1 series 編譯錯誤。
This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
— Reply to this email directly, view it on GitHub https://github.com/blackjetrock/pcg850vs-sd-gadget/issues/8, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHQ75GFNMTL5HFIKR6QBJXLZQS7W7AVCNFSM6AAAAABMIPJUHOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGQ2TOOJSGIZTOOA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Arduino:1.8.19 (Windows 7), 開發板:"Generic STM32F1 series, BlackPill F103C8, STM32CubeProgrammer (SWD), Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), None, Newlib Nano (default)"
In file included from C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/utility/CP_Firmata.h:17,
C:\Program Files (x86)\Arduino\libraries\Adafruit_Circuit_Playground/utility/CP_Boards.h:746:2: error: #error "Please edit CP_Boards.h with a hardware abstraction for this board"
746 | #error "Please edit CP_Boards.h with a hardware abstraction for this board"
exit status 1
開發板 Generic STM32F1 series 編譯錯誤。
This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.