Closed schnurlosdusche closed 1 year ago
I had a similar problem. The 3,3V from the usb was ok for flashing, but not enugh for normal operation. It looped in an bootloop.
So just disconnect the serial, close the display and connect 230V as with normal use. Then the accesspoint came up and the rest was bussiness as usual.
To enable the screen you have to load the autoexec.be and nspanel.be file into tasmota.
Just follow the instructions here: https://templates.blakadder.com/sonoff_NSPanel.html
Thank you for your reply... unfortunately, I have no access in any way to the device. When WiFi is not on, I am not able to set any WiFi credentials at all... Or do I get something wrong and there is another way to insert these credentials ?
Look (without the 230V) if something is printed on the console. If not, simply reflash tasmota. https://tasmota.github.io/install/
worked for me.
Japp... thanks to eokgnah, I found my own mistake ! I did oversee this entry in the webinstaller :(
Thanks for your answers/help and your time... hopefully in the future will be any issue, were I can help.
Hey there, flashed my nspanel EU with tasmota32.bin and no WiFi accespoint appears. Before I tried the tasmota32-nspanel.bin file, but the screen left blank/off and also no WiFi available. Both version tasmota 12.0.2.4
Is there a way to get back to basic (factory reset/defaults) ? Any help is appreciated !!