Closed fabltd closed 2 years ago
You didn't provide any of the information requested in the template.
Applogies please see below:
Describe the bug
Clips are overlayed with time stamp in UTC not local time and date is in US format.
Screenshots
Version of frigate
Output from /api/version
0.8.4-5043040
Config file Include your full config file wrapped in triple back ticks.
mqtt:
# Required: host name
host: *********
# Optional: port (default: shown below)
port: 1883
# Optional: topic prefix (default: shown below)
# WARNING: must be unique if you are running multiple instances
topic_prefix: frigate
# Optional: client id (default: shown below)
# WARNING: must be unique if you are running multiple instances
client_id: frigate
# Optional: user
user: mqtt
# Optional: password
# NOTE: Environment variables that begin with 'FRIGATE_' may be referenced in {}.
# eg. password: '{FRIGATE_MQTT_PASSWORD}'
password: *******
# Optional: interval in seconds for publishing stats (default: shown below)
stats_interval: 60
cameras:
front_door:
ffmpeg:
inputs:
- path: rtsp://admin:{FRIGATE_RTSP_PASSWORD_0}@******/rtsph2641080p
roles:
- detect
- rtmp
- clips
width: 1920
height: 1080
fps: 5
# Optional: Camera level detect settings
detect:
enabled: True
# Optional: Number of frames without a detection before frigate considers an object to be gone. (default: 5x the frame rate)
max_disappeared: 25
# Optional: save clips configuration
clips:
# Required: enables clips for the camera (default: shown below)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: True
# Optional: Number of seconds before the event to include in the clips (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include in the clips (default: shown below)
post_capture: 5
# Optional: Objects to save clips for. (default: all tracked objects)
objects:
- person
# Optional: Restrict clips to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
rtmp:
# Required: Enable the live stream (default: True)
enabled: True```
**Frigate container logs**
See above
**Frigate stats**
```json
{
"detection_fps": 0.0,
"detectors": {
"coral": {
"detection_start": 0.0,
"inference_speed": 10.34,
"pid": 31
}
},
"front_door": {
"camera_fps": 5.0,
"capture_pid": 35,
"detection_fps": 0.0,
"pid": 34,
"process_fps": 5.0,
"skipped_fps": 0.0
},
"service": {
"storage": {
"/dev/shm": {
"free": 63.4,
"mount_type": "tmpfs",
"total": 67.1,
"used": 3.7
},
"/media/frigate/clips": {
"free": 3265659.9,
"mount_type": "nfs4",
"total": 3266837.0,
"used": 1177.0
},
"/media/frigate/recordings": {
"free": 3265659.9,
"mount_type": "nfs4",
"total": 3266837.0,
"used": 1177.0
},
"/tmp/cache": {
"free": 985.3,
"mount_type": "tmpfs",
"total": 1000.0,
"used": 14.7
}
},
"uptime": 42,
"version": "0.8.4-5043040"
}
FFprobe from your camera
Run the following command and paste output below
ffprobe version 4.2.4-1ubuntu0.1 Copyright (c) 2007-2020 the FFmpeg developers
built with gcc 9 (Ubuntu 9.3.0-10ubuntu2)
configuration: --prefix=/usr --extra-version=1ubuntu0.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-nvenc --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
libavutil 56. 31.100 / 56. 31.100
libavcodec 58. 54.100 / 58. 54.100
libavformat 58. 29.100 / 58. 29.100
libavdevice 58. 8.100 / 58. 8.100
libavfilter 7. 57.100 / 7. 57.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 5.100 / 5. 5.100
libswresample 3. 5.100 / 3. 5.100
libpostproc 55. 5.100 / 55. 5.100
Input #0, rtsp, from 'rtsp://*******/rtsph2641080p':
Metadata:
title : RTSP/RTP stream from HDIPCam
Duration: N/A, start: 0.327189, bitrate: N/A
Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 15 fps, 25.08 tbr, 90k tbn, 30 tbc
Computer Hardware
Ubuntu 20.04.3 LTS
Docker Compose - See config:
version: "3.9"
services:
frigate:
container_name: frigate
privileged: true # this may not be necessary for all setups
restart: unless-stopped
image: blakeblackshear/frigate:stable-amd64
# shm_size: '256mb'
devices:
- /dev/bus/usb:/dev/bus/usb
- /dev/dri/renderD128 # for intel hwaccel, needs to be updated for your hardware
volumes:
- /etc/localtime:/etc/localtime:ro
- ./frigate.yml:/config/config.yml:ro
- /mnt/cctv:/media/frigate
- type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
target: /tmp/cache
tmpfs:
size: 1000000000
ports:
- "5000:5000"
- "1935:1935" # RTMP feeds
Esxi V7
USB
Wired
``` Camera Info:**
0.9.0 will include the ability to customize the timestamp format: https://github.com/blakeblackshear/frigate/blob/release-0.9.0/docs/docs/configuration/index.md
The time in the timestamp should follow the host settings based on your compose file: - /etc/localtime:/etc/localtime:ro
I got around this by mounting /usr/share/zoneinfo/Europe/London from the host into the container.
It looks like this in kubernetes:
...
volumeMounts:
- mountPath: /etc/localtime
name: tz-london
volumes:
- name: tz-london
hostPath:
path: /usr/share/zoneinfo/Europe/London
...
You can also just add a Docker environment variable to your compose file:
environment:
- FRIGATE_RTSP_PASSWORD="password"
- TZ=America/Chicago
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Describe the bug A clear and concise description of what your issue is.
The overlay on a clip has a UTC timestamp instead of local. When shown in home assistant.
Version of frigate 0.8.4-5043040