Hardware Setup with >4 Led Outputs does not work

[versamodule]

What happened?

I am using release 0.14.0-b5, on a ESP32-S3 Devkit. Everything works just fine with one exception. I have 5 Ws281x led strips. Each strip has 75 leds on it. Strips 1-4 work just fine, but the 5’th does not even light up. Yet, if I go into Config → LED Preferences and under Hardware setup I swap the GPIO pins of the 4 & 5’th strings, then the 5’th string works and the 4’th does not.

LED outputs are configured as such. Segment 0 = Start LED 0, Stop LED 375

Then Under Config → LED Preferences

1) Start 0, Length 75, GPIO 14

2) Start 75, Length 75, GPIO 13

3) Start 150, Length 75, GPIO 12

4) Start 225, Length 75, GPIO 11

5) Start 300, Length 75, GPIO 10

Any ideas what might be going on here?

To Reproduce Bug

Attach more than 4 LED strips

Expected Behavior

Expected 5 strips to work

Install Method

Binary from WLED.me

What version of WLED?

0.14.0-b5

Which microcontroller/board are you seeing the problem on?

ESP32-S3

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• [X] I agree to follow this project's Code of Conduct

[blazoncek]

S3 only supports 4 RMT outputs. It can support additional 3 virtual buses.

[blazoncek]

BTW this repo is currently unmaintained.