Can't scan DVBT/T2 frequencies with DVBT2 tuner

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Try to scan DVBT/T2 frequencies (automatic or manual)

What is the expected output? What do you see instead?
Be able to scan and tune to DVBT/T2 channels using T2 tuner

What version of the product are you using? On what operating system?
Open AR-P 08-04-13 on Amiko Alien 2+.

Please provide any additional information below.

I am in the UK. The automatic scan only scans the first frequency in 
terrestrial.xml. I tried a manual scan of the other frequencies in my area, but 
it only ever reports finding the channels from the frequency scanned. Seems to 
be some issue with the T2 drivers. Scanning works fine on HDMU.

I also tried loading a pre-scanned channel list backed up from HDMU, but many 
channels don't appear, and there is an error message ('PID not found' I think 
but I could be wrong).

Original issue reported on code.google.com by tsloa...@gmail.com on 17 Apr 2013 at 6:28

[GoogleCodeExporter]

This problem still exists on the latest image (01-2014). It seems that when 
viewing a terrestrial channel, the system gets stuck on that particular mux. 
You can view any other channel on that same mux, but trying to watch a channel 
on a different mux results in the 'PID not found' message. Rebooting the box 
clears things, but it gets stuck again next time a terrestrial channel is 
viewed. 

Original comment by tsloa...@gmail.com on 20 Jan 2014 at 5:27

[GoogleCodeExporter]

same issue with using DVB-T in italy,
i've tryed at change a lot of conf in tuner/C but don't solve.

do you thinking for a patch?

thanks a lot for Your work

Original comment by mcanto...@gmail.com on 10 Feb 2014 at 3:49

[GoogleCodeExporter]

Issue 122 has been merged into this issue.

Original comment by alexeytech on 15 Feb 2014 at 9:00

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Still not working

Original comment by dieciarr...@gmail.com on 5 Apr 2014 at 10:20