Closed benausti closed 8 years ago
Can you please go through https://github.com/blueman-project/blueman/wiki/Troubleshooting
And report back with the results/required info?
Mostly, that means, your hardware does not detected by kernel (its BlueZ stack), so you need driver which supports your BT-adapter. Please see the output of lspci
or lsusb
and dmesg
commands to know it.
when i run the commands i got the following output. Please help me identifying the issue:
15:33 Austine-Kor@localhost ~ $ su
Password:
15:33 root@localhost Austine-Kor # lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation HM55 Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4330/4350/4550]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
15:34 root@localhost Austine-Kor # lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0c45:641d Microdia 1.3 MPixel Integrated Webcam
Bus 001 Device 006: ID 413c:8162 Dell Computer Corp. Integrated Touchpad [Synaptics]
Bus 001 Device 005: ID 413c:8161 Dell Computer Corp. Integrated Keyboard
Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
15:35 root@localhost Austine-Kor # dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.3-200.fc22.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Thu Oct 8 03:23:55 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.3-200.fc22.x86_64 root=/dev/mapper/korora-root ro rd.lvm.lv=korora/root rd.lvm.lv=korora/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3e6000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77e000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7e1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7e2000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0304000-0x00000000f0304fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron 1464/ , BIOS A13 03/29/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f7180-0x000f718f] mapped at [ffff8800000f7180]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02043000, 0x02043fff] PGTABLE
[ 0.000000] BRK [0x02044000, 0x02044fff] PGTABLE
[ 0.000000] BRK [0x02045000, 0x02045fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x02046000, 0x02046fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x137dfffff]
[ 0.000000] [mem 0x120000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf1fffff] page 2M
[ 0.000000] [mem 0xbf200000-0xbf27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf282000-0xbf3e5fff]
[ 0.000000] [mem 0xbf282000-0xbf3e5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] [mem 0xbf40f000-0xbf46efff] page 4k
[ 0.000000] BRK [0x02047000, 0x02047fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] [mem 0xbf70f000-0xbf716fff] page 4k
[ 0.000000] BRK [0x02048000, 0x02048fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf71f000-0xbf77dfff]
[ 0.000000] [mem 0xbf71f000-0xbf77dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf79f000-0xbf7e1fff]
[ 0.000000] [mem 0xbf79f000-0xbf7e1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x356e7000-0x36b6bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F70A0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BF7F4407 000074 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF7E4000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BF7E5000 00A5EF (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BF79BFC0 000040
[ 0.000000] ACPI: FACS 0x00000000BF79BFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BF7FEC0A 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000BF7FEC42 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x00000000BF7FEC7E 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BF7FED02 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 0x00000000BF7FED2A 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BF7FED7A 000176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 0x00000000BF7FEEF0 000070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: ASF! 0x00000000BF7FEF60 0000A0 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7E3000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x137fe9000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf27bfff]
[ 0.000000] node 0: [mem 0x00000000bf282000-0x00000000bf3e5fff]
[ 0.000000] node 0: [mem 0x00000000bf40f000-0x00000000bf46efff]
[ 0.000000] node 0: [mem 0x00000000bf70f000-0x00000000bf716fff]
[ 0.000000] node 0: [mem 0x00000000bf71f000-0x00000000bf77dfff]
[ 0.000000] node 0: [mem 0x00000000bf79f000-0x00000000bf7e1fff]
[ 0.000000] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.000000] On node 0 totalpages: 1012870
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12180 pages used for memmap
[ 0.000000] DMA32 zone: 779499 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3e6000-0xbf40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf46f000-0xbf46ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf470000-0xbf4f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4f1000-0xbf70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf77e000-0xbf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7e2000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0303fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0304000-0xf0304fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0305000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880137c00000 s97048 r8192 d29928 u524288
[ 0.000000] pcpu-alloc: s97048 r8192 d29928 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997021
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.3-200.fc22.x86_64 root=/dev/mapper/korora-root ro rd.lvm.lv=korora/root rd.lvm.lv=korora/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3883296K/4051480K available (7670K kernel code, 1264K rwdata, 3336K rodata, 1512K init, 1544K bss, 168184K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:65792 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2127.993 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.98 BogoMIPS (lpj=2127993)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150619
[ 0.009376] ACPI: All ACPI Tables successfully acquired
[ 0.009406] Security Framework initialized
[ 0.009410] SELinux: Initializing.
[ 0.009420] SELinux: Starting in permissive mode
[ 0.009421] Yama: becoming mindful.
[ 0.009846] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010905] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011319] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011329] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011590] Initializing cgroup subsys blkio
[ 0.011595] Initializing cgroup subsys memory
[ 0.011604] Initializing cgroup subsys devices
[ 0.011607] Initializing cgroup subsys freezer
[ 0.011610] Initializing cgroup subsys net_cls
[ 0.011613] Initializing cgroup subsys perf_event
[ 0.011615] Initializing cgroup subsys net_prio
[ 0.011618] Initializing cgroup subsys hugetlb
[ 0.011664] CPU: Physical Processor ID: 0
[ 0.011665] CPU: Processor Core ID: 0
[ 0.011672] mce: CPU supports 9 MCE banks
[ 0.011682] CPU0: Thermal monitoring handled by SMI
[ 0.011690] process: using mwait in idle threads
[ 0.011694] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.011695] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.011839] Freeing SMP alternatives memory: 28K (ffffffff81eb8000 - ffffffff81ebf000)
[ 0.024600] ftrace: allocating 28731 entries in 113 pages
[ 0.042485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.153573] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[ 0.153602] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.153624] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.153627] ... version: 3
[ 0.153628] ... bit width: 48
[ 0.153629] ... generic registers: 4
[ 0.153630] ... value mask: 0000ffffffffffff
[ 0.153631] ... max period: 000000007fffffff
[ 0.153632] ... fixed-purpose events: 3
[ 0.153633] ... event mask: 000000070000000f
[ 0.154520] x86: Booting SMP configuration:
[ 0.154522] .... node #0, CPUs: #1
[ 0.155964] microcode: CPU1 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.155998] CPU1: Thermal monitoring handled by SMI
[ 0.158186] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.158335] #2
[ 0.159485] CPU2: Thermal monitoring handled by SMI
[ 0.161735] #3
[ 0.162885] CPU3: Thermal monitoring handled by SMI
[ 0.164993] x86: Booted up 1 node, 4 CPUs
[ 0.164998] smpboot: Total of 4 processors activated (17023.94 BogoMIPS)
[ 0.167708] devtmpfs: initialized
[ 0.170841] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff](528384 bytes)
[ 0.170853] PM: Registering ACPI NVS region [mem 0xbf77e000-0xbf79efff](135168 bytes)
[ 0.170948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.171049] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.171052] pinctrl core: initialized pinctrl subsystem
[ 0.171106] RTC time: 14:55:05, date: 11/03/15
[ 0.171246] NET: Registered protocol family 16
[ 0.173083] cpuidle: using governor menu
[ 0.173186] Simple Boot Flag at 0x36 set to 0x1
[ 0.173249] ACPI: bus type PCI registered
[ 0.173252] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.173350] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff](base 0xe0000000)
[ 0.173354] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.173367] PCI: Using configuration type 1 for base access
[ 0.176989] ACPI: Added _OSI(Module Device)
[ 0.176992] ACPI: Added _OSI(Processor Device)
[ 0.176993] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176995] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183334] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.184198] ACPI: Dynamic OEM Table Load:
[ 0.184206] ACPI: SSDT 0xFFFF880132A9E400 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.184675] ACPI: Dynamic OEM Table Load:
[ 0.184682] ACPI: SSDT 0xFFFF88013288C000 0008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.185429] ACPI: Dynamic OEM Table Load:
[ 0.185435] ACPI: SSDT 0xFFFF880132A9EC00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.185914] ACPI: Dynamic OEM Table Load:
[ 0.185919] ACPI: SSDT 0xFFFF880132B0CE00 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.186792] ACPI : EC: EC started
[ 0.186910] ACPI: Interpreter enabled
[ 0.186917] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S1
[ 0.186922] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S2
[ 0.186940] ACPI: (supports S0 S3 S4 S5)
[ 0.186941] ACPI: Using IOAPIC for interrupt routing
[ 0.186972] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.187502] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.187696] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.193323] ACPI: Power Resource FN00
[ 0.193431] ACPI: Power Resource FN01
[ 0.194174] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-fe])
[ 0.194181] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.194220] SB.PCI0:_OSC invalid UUID
[ 0.194221] _OSC request data:1 1f 0
[ 0.194226] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.194725] PCI host bridge to bus 0000:00
[ 0.194729] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.194731] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.194733] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.194736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.194738] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.194740] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.194742] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.194744] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.194746] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.194755] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.194781] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.194849] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.194884] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.194918] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.194996] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.195038] pci 0000:00:16.0: reg 0x10: [mem 0xf0305800-0xf030580f 64bit]
[ 0.195119] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.195210] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.195246] pci 0000:00:1a.0: reg 0x10: [mem 0xf0306000-0xf03063ff]
[ 0.195330] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.195416] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.195455] pci 0000:00:1b.0: reg 0x10: [mem 0xf0300000-0xf0303fff 64bit]
[ 0.195541] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195626] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.195720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195759] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.195809] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.195903] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.195942] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.195997] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.196095] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.196136] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.196189] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.196226] pci 0000:00:1d.0: reg 0x10: [mem 0xf0306400-0xf03067ff]
[ 0.196311] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.196366] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.196414] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.196512] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.196558] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.196729] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.196767] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.196779] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.196790] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.196801] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.196813] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.196824] pci 0000:00:1f.2: reg 0x24: [mem 0xf0305000-0xf03057ff]
[ 0.196865] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.196947] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.196974] pci 0000:00:1f.3: reg 0x10: [mem 0xf0306800-0xf03068ff 64bit]
[ 0.197005] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.197154] pci 0000:02:00.0: [1002:9552] type 00 class 0x030000
[ 0.197186] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.197197] pci 0000:02:00.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.197208] pci 0000:02:00.0: reg 0x18: [mem 0xcfef0000-0xcfefffff]
[ 0.197244] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.197272] pci 0000:02:00.0: supports D1 D2
[ 0.197333] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
[ 0.197364] pci 0000:02:00.1: reg 0x10: [mem 0xcfeec000-0xcfeeffff]
[ 0.197443] pci 0000:02:00.1: supports D1 D2
[ 0.197517] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.197520] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.197523] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.197527] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197593] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.198222] pci 0000:04:00.0: [14e4:4315] type 00 class 0x028000
[ 0.199584] pci 0000:04:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.202764] pci 0000:04:00.0: supports D1 D2
[ 0.202766] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.203327] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.203790] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.203798] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.203885] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.203927] pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.203958] pci 0000:05:00.0: reg 0x18: [mem 0xf0410000-0xf0410fff 64bit pref]
[ 0.203979] pci 0000:05:00.0: reg 0x20: [mem 0xf0400000-0xf040ffff 64bit pref]
[ 0.203992] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.204049] pci 0000:05:00.0: supports D1 D2
[ 0.204051] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204087] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.206077] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.206087] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.206104] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.206202] pci 0000:00:1e.0: PCI bridge to [bus 06](subtractive decode)
[ 0.206217] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window](subtractive decode)
[ 0.206219] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window](subtractive decode)
[ 0.206221] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window](subtractive decode)
[ 0.206223] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window](subtractive decode)
[ 0.206225] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window](subtractive decode)
[ 0.206227] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window](subtractive decode)
[ 0.206229] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window](subtractive decode)
[ 0.206231] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window](subtractive decode)
[ 0.206735] ACPI: PCI Interrupt Link [LNKA](IRQs 1 3 4 5 6 7 10 12 14 15)
[ 0.206794] ACPI: PCI Interrupt Link [LNKB](IRQs 1 3 4 5 6 7 11 12 14 15)
[ 0.206851] ACPI: PCI Interrupt Link [LNKC](IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled.
[ 0.206909] ACPI: PCI Interrupt Link [LNKD](IRQs 1 3 4 5 6 7 11 12 14 15) 10
[ 0.206968] ACPI: PCI Interrupt Link [LNKE](IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled.
[ 0.207025] ACPI: PCI Interrupt Link [LNKF](IRQs 1 3 4 5 6 7 11 12 14 15) 0, disabled.
[ 0.207088] ACPI: PCI Interrupt Link [LNKG](IRQs 1 3 4 5 6 7 10 12 14 15) 11
[ 0.207145] ACPI: PCI Interrupt Link [LNKH](IRQs 1 3 4 5 6 7 11 12 14 15) 10
[ 0.207944] ACPI: PCI Root Bridge [CPBG](domain 0000 [bus ff])
[ 0.207950] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.207955] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.208039] PCI host bridge to bus 0000:ff
[ 0.208042] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.208052] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.208108] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.208167] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.208218] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.208268] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.208320] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.208515] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.208591] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.208741] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.208744] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208746] vgaarb: loaded
[ 0.208747] vgaarb: bridge control possible 0000:02:00.0
[ 0.208877] SCSI subsystem initialized
[ 0.208928] libata version 3.00 loaded.
[ 0.208966] ACPI: bus type USB registered
[ 0.208989] usbcore: registered new interface driver usbfs
[ 0.208999] usbcore: registered new interface driver hub
[ 0.209019] usbcore: registered new device driver usb
[ 0.209144] PCI: Using ACPI for IRQ routing
[ 0.219023] PCI: pci_cache_line_size set to 64 bytes
[ 0.219257] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.219259] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.219262] e820: reserve RAM buffer [mem 0xbf3e6000-0xbfffffff]
[ 0.219264] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.219266] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[ 0.219268] e820: reserve RAM buffer [mem 0xbf77e000-0xbfffffff]
[ 0.219270] e820: reserve RAM buffer [mem 0xbf7e2000-0xbfffffff]
[ 0.219272] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.219415] NetLabel: Initializing
[ 0.219417] NetLabel: domain hash size = 128
[ 0.219417] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.219434] NetLabel: unlabeled traffic allowed by default
[ 0.219522] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.219528] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.221570] clocksource: Switched to clocksource hpet
[ 0.230616] pnp: PnP ACPI init
[ 0.230845] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.230849] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.230851] system 00:00: [io 0x0600-0x0603] has been reserved
[ 0.230853] system 00:00: [io 0xffff] has been reserved
[ 0.230856] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.230858] system 00:00: [io 0x1180-0x11ff] has been reserved
[ 0.230860] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.230862] system 00:00: [io 0xfe00] has been reserved
[ 0.230868] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230922] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230959] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.230986] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.231315] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.231318] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.231320] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.231322] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.231325] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.231327] system 00:04: [mem 0xf0304000-0xf0304fff] has been reserved
[ 0.231329] system 00:04: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.231332] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.231334] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.231336] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.231339] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.231341] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.231345] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232073] pnp: PnP ACPI: found 5 devices
[ 0.239353] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.239379] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.239383] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.239385] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.239397] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.239400] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.239413] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 05] add_size 400000 add_align 100000
[ 0.239427] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.239429] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.239432] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.239434] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.239437] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.239439] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.239442] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.239444] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x005fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.239447] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.239449] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.239451] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.239453] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.239461] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.239468] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.239474] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.239477] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.239480] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.239483] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.239488] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.239491] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.239493] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.239497] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.239500] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.239504] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.239507] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.239514] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.239519] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.239527] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.239530] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.239537] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.239542] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.239551] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0600000-0xc061ffff pref]
[ 0.239553] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.239556] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.239570] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.239575] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.239584] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.239600] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.239602] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.239604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.239606] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.239608] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.239610] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.239612] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 0.239614] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[ 0.239616] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.239618] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.239621] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.239623] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.239625] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.239627] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.239629] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.239631] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.239633] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.239635] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.239637] pci_bus 0000:05: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.239639] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.239641] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.239644] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.239646] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.239648] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.239650] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.239652] pci_bus 0000:06: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.239654] pci_bus 0000:06: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 0.239656] pci_bus 0000:06: resource 11 [mem 0xf0000000-0xfebfffff window]
[ 0.239698] NET: Registered protocol family 2
[ 0.239928] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.240070] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.240246] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.240283] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.240325] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.240411] NET: Registered protocol family 1
[ 0.240957] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.241059] PCI: CLS 64 bytes, default 64
[ 0.241135] Unpacking initramfs...
[ 0.647755] Freeing initrd memory: 21012K (ffff8800356e7000 - ffff880036b6c000)
[ 0.647770] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.647773] software IO TLB mem 0xbb27c000-0xbf27c000 mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[ 0.647965] microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
[ 0.647975] microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
[ 0.647984] microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
[ 0.647994] microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
[ 0.648088] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 0.648937] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.648960] Initialise system trusted keyring
[ 0.648991] audit: initializing netlink subsys (disabled)
[ 0.649013] audit: type=2000 audit(1446562505.525:1): initialized
[ 0.649439] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651258] zpool: loaded
[ 0.651261] zbud: loaded
[ 0.651501] VFS: Disk quotas dquot_6.6.0
[ 0.651545] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.652038] Key type big_key registered
[ 0.652042] SELinux: Registering netfilter hooks
[ 0.658205] NET: Registered protocol family 38
[ 0.658219] Key type asymmetric registered
[ 0.658223] Asymmetric key parser 'x509' registered
[ 0.658253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.658317] io scheduler noop registered
[ 0.658320] io scheduler deadline registered
[ 0.658364] io scheduler cfq registered (default)
[ 0.659225] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.659233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.659267] intel_idle: MWAIT substates: 0x1120
[ 0.659269] intel_idle: v0.4 model 0x25
[ 0.659271] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.760564] ACPI: AC Adapter ADP1
[ 0.760720] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.760728] ACPI: Power Button [PWRB]
[ 0.760822] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.760828] ACPI: Sleep Button [SLPB]
[ 0.760924] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.761802] ACPI: Lid Switch [LID0]
[ 0.761922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.761929] ACPI: Power Button [PWRF]
[ 0.763542] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.763548] ACPI: Thermal Zone [TZ00](27 C)
[ 0.764363] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.764368] ACPI: Thermal Zone [TZ01](0 C)
[ 0.764444] GHES: HEST is not enabled!
[ 0.764653] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.770672] Non-volatile memory driver v1.3
[ 0.770826] Linux agpgart interface v0.103
[ 0.772372] ahci 0000:00:1f.2: version 3.0
[ 0.774160] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.774202] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.774206] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 0.776447] scsi host0: ahci
[ 0.776985] scsi host1: ahci
[ 0.777367] scsi host2: ahci
[ 0.777742] scsi host3: ahci
[ 0.777905] ata1: SATA max UDMA/133 abar m2048@0xf0305000 port 0xf0305100 irq 25
[ 0.777954] ata2: SATA max UDMA/133 abar m2048@0xf0305000 port 0xf0305180 irq 25
[ 0.777957] ata3: DUMMY
[ 0.777959] ata4: DUMMY
[ 0.778297] libphy: Fixed MDIO Bus: probed
[ 0.778526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.778539] ehci-pci: EHCI PCI platform driver
[ 0.780853] ACPI: Battery Slot [BAT0](battery present)
[ 0.781013] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.781098] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.781114] ehci-pci 0000:00:1a.0: debug port 2
[ 0.785111] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.785125] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0306000
[ 0.790465] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.790600] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.790604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.790607] usb usb1: Product: EHCI Host Controller
[ 0.790610] usb usb1: Manufacturer: Linux 4.2.3-200.fc22.x86_64 ehci_hcd
[ 0.790613] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.790856] hub 1-0:1.0: USB hub found
[ 0.790867] hub 1-0:1.0: 3 ports detected
[ 0.791276] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.791376] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.791395] ehci-pci 0000:00:1d.0: debug port 2
[ 0.795406] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.795424] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0306400
[ 0.801459] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.801532] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.801536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.801539] usb usb2: Product: EHCI Host Controller
[ 0.801542] usb usb2: Manufacturer: Linux 4.2.3-200.fc22.x86_64 ehci_hcd
[ 0.801545] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.801763] hub 2-0:1.0: USB hub found
[ 0.801773] hub 2-0:1.0: 3 ports detected
[ 0.801958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.801974] ohci-pci: OHCI PCI platform driver
[ 0.801992] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.802068] usbcore: registered new interface driver usbserial
[ 0.802079] usbcore: registered new interface driver usbserial_generic
[ 0.802090] usbserial: USB Serial support registered for generic
[ 0.802145] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.808521] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.808533] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.808837] mousedev: PS/2 mouse device common for all mice
[ 0.809520] rtc_cmos 00:01: RTC can wake from S4
[ 0.809855] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.809948] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.810134] device-mapper: uevent: version 1.0.3
[ 0.810407] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 0.811237] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.811367] usbcore: registered new interface driver usbhid
[ 0.811370] usbhid: USB HID core driver
[ 0.811574] drop_monitor: Initializing network drop monitor service
[ 0.811763] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.811879] Initializing XFRM netlink socket
[ 0.812192] NET: Registered protocol family 10
[ 0.812681] mip6: Mobile IPv6
[ 0.812689] NET: Registered protocol family 17
[ 0.813786] Loading compiled-in X.509 certificates
[ 0.814755] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.817010] Loaded X.509 cert 'Fedora kernel signing key: 6b3269bbf8479701c80315fb5f368af9245207be'
[ 0.817053] registered taskstats version 1
[ 0.817097] zswap: loading zswap
[ 0.817102] zswap: using zbud pool
[ 0.817116] zswap: using lzo compressor
[ 0.818278] Magic number: 7:630:939
[ 0.818468] rtc_cmos 00:01: setting system clock to 2015-11-03 14:55:06 UTC (1446562506)
[ 0.818699] PM: Hibernation image not present or could not be loaded.
[ 1.082314] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.085043] ata1.00: ATA-8: WDC WD5000BEVT-75A0RT0, 01.01A01, max UDMA/133
[ 1.085048] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.087932] ata1.00: configured for UDMA/133
[ 1.088238] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-7 1A01 PQ: 0 ANSI: 5
[ 1.088772] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.088784] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.088994] sd 0:0:0:0: [sda] Write Protect is off
[ 1.088999] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.089086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.092243] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.103298] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.136324] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.137442] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.206650] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.206658] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.207300] hub 1-1:1.0: USB hub found
[ 1.207522] hub 1-1:1.0: 6 ports detected
[ 1.217981] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.217989] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.218539] hub 2-1:1.0: USB hub found
[ 1.218733] hub 2-1:1.0: 8 ports detected
[ 1.393183] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.395665] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD12, max UDMA/100
[ 1.396976] ata2.00: configured for UDMA/100
[ 1.405820] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD12 PQ: 0 ANSI: 5
[ 1.436359] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.436364] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.436680] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.436804] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.437577] Freeing unused kernel memory: 1512K (ffffffff81d3e000 - ffffffff81eb8000)
[ 1.437580] Write protecting the kernel read-only data: 12288k
[ 1.437937] Freeing unused kernel memory: 512K (ffff880001780000 - ffff880001800000)
[ 1.438257] Freeing unused kernel memory: 760K (ffff880001b42000 - ffff880001c00000)
[ 1.442718] random: systemd urandom read with 23 bits of entropy available
[ 1.444660] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.445074] systemd[1]: Detected architecture x86-64.
[ 1.445083] systemd[1]: Running in initial RAM disk.
[ 1.445144] systemd[1]: Set hostname to
From what I can gather BCM2046
should work in bluez >4.66, but this is broadcom so who knows..
@benausti, still waiting for the info described https://github.com/blueman-project/blueman/wiki/Troubleshooting. If the device is not detected with the command described here there is nothing we can do from blueman :smile:
Possible, the problem is in firmware, which is too old, and it may doesn't support your combined device. This device is managed by b43 driver, which requires a proper firmware.
Hi,
My bluetooth hardware is not getting detected. I am using Korora 22 in my Dell Inspiron 1464. Screenshot is below. Please advise how to fix it.