bluzDK bluzDK-firmware issues

bluzDK / bluzDK-firmware

Firmware for the bluz development kit

Other

15 stars 15 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Support for pulseIn()

#45 eely22 opened 7 years ago
0
Enable ability to advertise while connected

#44 eely22 opened 7 years ago
0
UART seems to not handle multiple Serial1.write commands in a row

#43 eely22 opened 7 years ago
0
Better Gateway Housekeeping

#42 eely22 opened 7 years ago
0
Particle.process() Not Supported

#41 eely22 opened 7 years ago
0
OTA Firmware Updates Can Stall

#40 eely22 closed 7 years ago
3
SPI Peripheral fails to initialize if SPI.begin is called outside setup.loop

#39 eely22 closed 7 years ago
1
SPI.transfer hangs if called before SPI.begin

#38 eely22 closed 7 years ago
1
Increase Max Number of GPIOTE Events

#37 eely22 opened 7 years ago
0
Allow for battery voltage check

#36 eely22 closed 7 years ago
1
Interrupts Intermittent with v2.0.50

#35 eely22 closed 8 years ago
3
SPI.begin() seems to hijack the I2C pins as well

#34 eely22 closed 8 years ago
7
Better Connection Management

#33 eely22 opened 8 years ago
0
Release 1 1 47

#32 sburne1 opened 8 years ago
1
Add automatic buildpack building

#31 suda closed 8 years ago
10
Long connection intervals combined with Particle.publish can cause hangs

#30 eely22 opened 8 years ago
0
Allow naming of gateways and transfer of the name to DK upon connection

#29 eely22 opened 8 years ago
0
Add BLE.getRSSI()

#28 eely22 closed 7 years ago
1
Blynk

#27 gruvin closed 2 years ago
0
Wire.isEnabled() always returns true

#26 telliottosceola closed 8 years ago
6
Support System Events

#25 eely22 opened 8 years ago
0
analogRead is broken in develop

#24 eely22 closed 8 years ago
2
sprintf not working

#23 eely22 opened 8 years ago
0
Stop user timers before OTA flash start + trivial typo in timer test app.

#22 gruvin closed 8 years ago
1
App Timer timers need to be stopped before OTA commences

#21 gruvin closed 8 years ago
3
Timer class ready to rock and roll.

#20 gruvin closed 8 years ago
1
BluzDK -- setup() always called before Particle.connected()==true

#19 gruvin closed 8 years ago
11
delay() doesn't process data, cloud/BLE functions blocked when it is called

#18 gruvin closed 3 years ago
2
Brought gateway_develop up to date with develop, fixing several bugs and allowing Timer:: to work again

#17 gruvin closed 8 years ago
1
gateway_develop: Added bluzDK Timer:: class to wiring

#16 gruvin closed 8 years ago
1
missing makefiles and module_bounds_length=[3|4] #if conditionals

#15 gruvin closed 8 years ago
1
fixed out of bounds memory access caused by module_bounds_length = 4

#14 gruvin closed 8 years ago
1
timer for OTA updates, reset if it hangs

#13 eely22 closed 8 years ago
0
bump version numbers. fix issue where the connect flag was in the wro…

#12 eely22 closed 8 years ago
0
[RESOLVED] iOS app with Automatic Reconnects and long range/spotty connections can cause bluz to hang

#11 eely22 closed 8 years ago
3
Serial1.print hangs

#10 eely22 closed 8 years ago
1
ANCS Support

#9 eely22 opened 8 years ago
1
I2C sensors not found after using SPI

#8 Ibuprofen closed 8 years ago
2
HAL_SPI_Begin not setting pinMode for default or specified SS pin

#7 pkourany closed 8 years ago
1
Merge Conflict Text still in File

#6 wgbartley closed 8 years ago
1
Bluz does not recover from magenta state

#5 eely22 closed 8 years ago
1
Serial.println is not interrupt safe

#4 eely22 closed 8 years ago
1
Serial1.print before Serial1.begin hangs app

#3 eely22 closed 8 years ago
1
Serial1.print can hang

#2 eely22 closed 8 years ago
1
Particle.publish fails if called before a connection is made

#1 eely22 closed 8 years ago
2