As part of the Shanghai upgrade, EIP-3855: PUSH0 Instruction is required to be implemented to BSC.
2. Abstract
Introduce the PUSH0 (0x5f) instruction, which pushes the constant value 0 onto the stack.
3. Motivation
Original motivation from EIP-3855:
Many instructions expect offsets as inputs, which in a number of cases are zero. A good example is the return data parameters of CALLs, which are set to zeroes in case the contract prefers using RETURNDATA. This is only one example, but there are many other reasons why a contract would need to push a zero value. They can achieve that today by PUSH1 0, which costs 3 gas at runtime, and is encoded as two bytes which means 2 200 gas deployment cost.
Because of the overall cost many try to use various other instructions to achieve the same effect. Common examples include PC, MSIZE, CALLDATASIZE, RETURNDATASIZE, CODESIZE, CALLVALUE, and SELFBALANCE. Some of these cost only 2 gas and are a single byte long, but their value can depend on the context.
Analysis has been conducted on ETH Mainnet (block ranges 8,567,259…8,582,058 and 12,205,970…12,817,405), and ~11.5% of all the PUSH* instructions executed push a value of zero.
The main motivations for this change include:
Reducing contract code size.
Reducing the risk of contracts (mis)using various instructions as an optimisation measure. Repricing/changing those instructions can be more risky.
Reduce the need to use DUP instructions for duplicating zeroes.
To put the “waste” into perspective, across existing accounts 340,557,331 bytes are wasted on PUSH1 00 instructions, which means 68,111,466,200 gas was spent to deploy them. In practice a lot of these accounts share identical bytecode with others, so their total stored size in clients is lower, however the deploy time cost must have been paid nevertheless.
An example for 2) is changing the behaviour of RETURNDATASIZE such that it may not be guaranteed to be zero at the beginning of the call frame. This was proposed as a way to chain transactions (i.e. EIP-2733).
4. Specification
The instruction PUSH0 is introduced at 0x5f. It has no immediate data, pops no items from the stack, and places a single item with the value 0 onto the stack. The cost of this instruction is 2 gas (aka base).
5. Rationale
Gas cost
The base gas cost is used for instructions which place constant values onto the stack, such as ADDRESS, ORIGIN, and so forth.
Opcode
0x5f means it is in a “contiguous” space with the rest of the PUSH implementations and potentially could share the implementation.
6. Backwards Compatibility
This introduces a new opcode which did not exist previously. Already deployed contracts using this opcode could change their behaviour after this EIP.
7. Test Cases
5F – successful execution, stack consist of a single item, set to zero
5F5F..5F (1024 times) – successful execution, stack consists of 1024 items, all set to zero
5F5F..5F (1025 times) – execution aborts due to out of stack
Alex Beregszaszi (@axic), Hugo De la cruz (@hugo-dc), Paweł Bylica (@chfast), "EIP-3855: PUSH0 instruction [DRAFT]," Ethereum Improvement Proposals, no. 3855, February 2021. [Online serial]. Available: https://eips.ethereum.org/EIPS/eip-3855.
BEP-216: Implement EIP 3855 PUSH0 instruction
1. Summary
As part of the Shanghai upgrade, EIP-3855: PUSH0 Instruction is required to be implemented to BSC.
2. Abstract
Introduce the PUSH0 (0x5f) instruction, which pushes the constant value 0 onto the stack.
3. Motivation
Original motivation from EIP-3855:
Many instructions expect offsets as inputs, which in a number of cases are zero. A good example is the return data parameters of CALLs, which are set to zeroes in case the contract prefers using RETURNDATA. This is only one example, but there are many other reasons why a contract would need to push a zero value. They can achieve that today by PUSH1 0, which costs 3 gas at runtime, and is encoded as two bytes which means 2 200 gas deployment cost.
Because of the overall cost many try to use various other instructions to achieve the same effect. Common examples include PC, MSIZE, CALLDATASIZE, RETURNDATASIZE, CODESIZE, CALLVALUE, and SELFBALANCE. Some of these cost only 2 gas and are a single byte long, but their value can depend on the context.
Analysis has been conducted on ETH Mainnet (block ranges 8,567,259…8,582,058 and 12,205,970…12,817,405), and ~11.5% of all the PUSH* instructions executed push a value of zero.
The main motivations for this change include:
To put the “waste” into perspective, across existing accounts 340,557,331 bytes are wasted on PUSH1 00 instructions, which means 68,111,466,200 gas was spent to deploy them. In practice a lot of these accounts share identical bytecode with others, so their total stored size in clients is lower, however the deploy time cost must have been paid nevertheless.
An example for 2) is changing the behaviour of RETURNDATASIZE such that it may not be guaranteed to be zero at the beginning of the call frame. This was proposed as a way to chain transactions (i.e. EIP-2733).
4. Specification
The instruction PUSH0 is introduced at 0x5f. It has no immediate data, pops no items from the stack, and places a single item with the value 0 onto the stack. The cost of this instruction is 2 gas (aka base).
5. Rationale
Gas cost
The base gas cost is used for instructions which place constant values onto the stack, such as ADDRESS, ORIGIN, and so forth.
Opcode
0x5f means it is in a “contiguous” space with the rest of the PUSH implementations and potentially could share the implementation.
6. Backwards Compatibility
This introduces a new opcode which did not exist previously. Already deployed contracts using this opcode could change their behaviour after this EIP.
7. Test Cases
8 License
The content is licensed under CC0.
9. Reference
Most description of this BEP refer to EIP-3855:
Alex Beregszaszi (@axic), Hugo De la cruz (@hugo-dc), Paweł Bylica (@chfast), "EIP-3855: PUSH0 instruction [DRAFT]," Ethereum Improvement Proposals, no. 3855, February 2021. [Online serial]. Available: https://eips.ethereum.org/EIPS/eip-3855.