BEP217: Implement EIP3860 Limit and meter initcode

[sunny2022da]

  BEP: 217
  Title: Implement EIP3860 Limit and meter initcode
  Status: Draft
  Type: Standards
  Created: 2023-3-30

BEP-217: Implement EIP3860 Limit and meter initcode

• BEP-217: Implement EIP3860 Limit and meter initcode
  • 1. Summary
  • 2. Abstract
  • 3. Motivation
  • 4. Specification
  • 5. Rationale
  • 6. Backwards Compatibility
  • 7. Test Cases
  • 8. License
  • 9. Reference

1. Summary

As part of Shanghai upgrade, EIP-3860: Limit and meter initcode is required to be implemented to BSC.

2. Abstract

The change introduces a maximum size limit for initcode (MAX_INITCODE_SIZE = 2 * MAX_CODE_SIZE = 49152). Which extended the EIP-170: Contract code size limit

Furthermore, EIP-3860 introduced a charge of 2 gas for every 32-byte chunk of initcode to represent the cost of jumpdest-analysis.

Lastly, the size limit results in the nice-to-have property that EVM code size, code offset (PC), and jump offset fits a 16-bit value.

3. Motivation

Refer to EIP-3860 description:

During contract creation the client has to perform jumpdest-analysis on the initcode prior to execution. The work performed scales linearly with the size of the initcode. This work currently is not metered, nor is there a protocol enforced upper bound for the size.

There are three costs charged today:

1. Cost for calldata aka initcode: 4 gas for a byte with the value of zero, and 16 gas otherwise.
2. Cost for the resulting deployed code: 200 gas per byte.
3. Cost of address calculation (hashing of code) in case of CREATE2 only: 6 gas per word.

Only the first cost applies to initcode, but only in the case of contract creation transactions. For the case of CREATE/CREATE2 there is no such cost, and it is possible to programmatically generate variations of initcode in a relatively cheap manner. In the past it was possible to craft malicious initcode due to a vulnerability fixed in 2017 by geth 1.6.5.

Furthermore, the lack of a limit has caused lengthy discussions for some EVM proposals, influencing the design, or even causing a delay or cancellation of a feature.

It is motivated by three reasons:

1. Ensuring initcode is fairly charged (most importantly cost is proportional to initcode’s length) to minimize the risks for the future.
2. To have a cost system which is extendable in the future (i.e. for proposals like EIP-3670).
3. To simplify EVM engines by the explicit limits (code size, code offsets (PC), and jump offsets fit 16-bits).

4. Specificaton

Parameters

Constant	Value
INITCODE_WORD_COST	2
MAX_INITCODE_SIZE	2 * MAX_CODE_SIZE

Where MAX_CODE_SIZE is defined by EIP-170 as 24576.

We define initcode_cost(initcode) to equal INITCODE_WORD_COST * ceil(len(initcode) / 32).

Rules

1. If length of transaction data (initcode) in a create transaction exceeds MAX_INITCODE_SIZE, transaction is invalid. (Note that this is similar to transactions considered invalid for not meeting the intrinsic gas cost requirement.)
2. For a create transaction, extend the transaction data cost formula to include initcode_cost(initcode). (Note that this is included in transaction intrinsic cost, i.e. transaction with not enough gas to cover initcode cost is invalid.)
3. If length of initcode to CREATE or CREATE2 instructions exceeds MAX_INITCODE_SIZE, instruction execution exceptionally aborts (as if it runs out of gas).
4. For the CREATE and CREATE2 instructions charge an extra gas cost equaling to initcode_cost(initcode). This cost is deducted before the calculation of the resulting contract address and the execution of initcode. (Note that this means before or at the same time as the hashing cost is applied in CREATE2.)

5. Rationale

Gas cost constant

The value of INITCODE_WORD_COST is selected based on performance benchmarks of differing worst-cases per implementation. The baseline for the benchmarks is the performance of KECCAK256 hashing in geth 1.10.9, which matches the 70 Mgas/s gas limit target on a 4.0 GHz x86_64 CPU.

EVM	version	MB/s	B/CPUcycle	CPUcycle/B	cost of 1 B	cost of 32 B
geth/KECCAK256	1.10.9	357	1.8	0.6	0.2	6.0
geth	1.10.9	1091	5.5	0.2	0.1	2.0
evmone/Baseline	0.8.2	727	3.7	0.3	0.1	2.9
evmone/Advanced	0.8.2	155	0.8	1.3	0.4	13.8

Gas cost per word (32-byte chunk)

We have chosen the cost of 2 gas per word based on Geth’s implementation and comparing with KECCAK256 performance. This means the per byte cost is 0.0625. While fractional gas costs are not permitted in the EVM, we can approximate it by charging per-word.

Moreover, calculating gas per word is compatible with the calculation of CREATE2’s hashcost of EIP-1014. Therefore, the same implementation may be used for CREATE and CREATE2 with different cost constants: before activation 0 for CREATE and 6 for CREATE2, after activation 2 for CREATE and 6 + 2 for CREATE2.

Reason for size limit of initcode

Estimating and creating worst case scenarios is easier with an upper bound in place, given one parameter for the search is greatly reduced. This allows for selecting a much more optimistic gas per byte.

Should there be no upper bound, the cost would need to be higher accounting for unknown unknowns. Given most initcode (TODO: state maximum initcode size resulting in deployment seen on mainnet here) does not exceed the proposed limit, penalizing contracts by overly conservative costs seems unnecessary.

Effect of size limit of initcode

In most, if not all cases when a new contract is being created, the resulting runtime code is copied from the initcode itself. For the basic case the 2 * MAX_CODE_SIZE limit allows MAX_CODE_SIZE for runtime code and another MAX_CODE_SIZE for contract constructor code. However, the limit may have practical implications for cases where multiple contracts are deployed in a single create transaction.

Initcode cost for create transaction

The initcode cost for create transaction data (0.0625 gas per byte) is negligible compared to the transaction data cost (4 or 16 gas per byte). Despite that, we decided to include it in the specification for consistency, and more importantly for forward compatibility.

How to report initcode limit violation?

We specified that initcode size limit violation for CREATE/CREATE2 results in exceptional abort of the execution. This places it in the group of early out-of-gas checks, including: stack underflow, memory expansion, static call violation, initcode hashing cost, and initcode cost introduced by this EIP. They precede the later “light” checks: call depth and balance. The choice gives consistency to the order of checks and lowers implementation complexity (out-of-gas checks can be performed in any order).

6. Backwards Compatibility

This BEP requires a “network upgrade”, since it modifies consensus rules.

Already deployed contracts should not be affected, but certain transactions (with initcode beyond the proposed limit) would still be includable in a block, but result in an exceptional abort.

7. Test Cases

Tests should include the following cases:

• Creation transaction with gas limit enough to cover initcode cost
• Creation transaction with gas limit enough to cover intrinsic cost except initcode cost
• CREATE/CREATE2/creation transaction with len(initcode) at MAX_INITCODE_SIZE
• CREATE/CREATE2/creation transaction with len(initcode) at MAX_INITCODE_SIZE+1

8. License

The content is licensed under CC0.

9. Reference

Most description of this BEP refer to EIP-3860:

Martin Holst Swende (@holiman), Paweł Bylica (@chfast), Alex Beregszaszi (@axic), Andrei Maiboroda (@gumb0), "EIP-3860: Limit and meter initcode [DRAFT]," Ethereum Improvement Proposals, no. 3860, July 2021. [Online serial]. Available: https://eips.ethereum.org/EIPS/eip-3860.

[Eren0180]

0x2Bd7174434E4D9189bFF59A41C51175A88060F65

[Imranch569]

Good project with nice features