Add a new panel 128x64 s32 SN16380SF

digi55 commented 4 months ago

Panel description : P2.5 Panel

Dimensions (in pixels) : 128x64

Scan factor: 1/32

Chips on rear side: SM16380SF, 74HC04, 74HC245

Panel photos

Sample videos

Specifications

Library version: 1.1.2
Platform: STM32
MCU board: bluepil STM32F103C8T6
Connections: used pins A=PB6, B=PB5, C=PB4, D= PB3, E=PB8 nOE=PB0, SCLK=PB7 CLK=PA6, R0=PA0, G0=PA1, B0=PA2, R1=PA3, G1=PA4, B1=PA5

board707 commented 4 months ago

Unfortunately, your panel is based on a S-PWM type driver SM16380 that is not supported by the library.

digi55 commented 4 months ago

Thank you for information!

24 Şub 2024 Cmt 13:05 tarihinde board707 @.***> şunu yazdı:

Closed #82 https://github.com/board707/DMD_STM32/issues/82 as not planned.

— Reply to this email directly, view it on GitHub https://github.com/board707/DMD_STM32/issues/82#event-11910483120, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGLBSTCH33DAAEAFNW2DDBDYVG3PNAVCNFSM6AAAAABDWUYRVSVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJRHEYTANBYGMYTEMA . You are receiving this because you authored the thread.Message ID: @.***>

board707 / DMD_STM32

Add a new panel 128x64 s32 SN16380SF #82