Ignores Subnet, responds to broadcast

bobo1on1 / loc_controller

Firmware for the art-net to led strip controller custom designed for OHM2013

14 stars 2 forks source link

Ignores Subnet, responds to broadcast #2

Open Electronics opened 5 years ago

Electronics commented 5 years ago

Sending any broadcast artnet to any subnet/ip range that coincides with the artnet universe that an OHM light is using, causes the light to accept the packet and strobe between the two sources.

Electronics commented 5 years ago

It may be causing the LEDs to simply drop due to the code hanging slightly on extra broadcast rather than accepting the packet? - Need to test