If so i would like a new module in the 3H format that will do the following:
-knob to select voltage -10 - +10
-CV input for this knob
-CV inverter switch
-reset jack
-mode button (trigger/toggle/gate/always on/latch)
-output jack that will output the voltage based on the mode.
-trigger jack will accept either a trigger or gate no matter what mode is set.
basically, if the CV input is used it will just resend the CV voltage, and if no CV input is connected it will send the voltage selected with the knob.
if mode is trigger when a trigger/gate is received it will pulse the output voltage as a "trigger"
if the mode is toggle each consecutive trigger/gate will toggle the output on/off
if the mode is gate the output voltage will be sent as long as the gate is held high or in the case of a trigger activating the module a predefined gate length is sent (selectable with a knob?)
if mode is always on the voltage will be sent continuously unless a trigger/gate is received (trigger/Gate inverter)
if the mode is "latch" the voltage will be sent when a trigger/gate is received and will remain on until the mode is changed, or a reset trigger is received on the reset jack.
this is very similar to an existing module but has a few more options. most importantly the latch idea. it will give several functions in one module.
-constant voltage source
-switched voltage source with several switching schemes
-a latching gate
-Trigger/Gate inverter
-Trigger/Gate converter
-voltage inverter
if further information is needed I am happy to talk in greater detail. but i think this gives the basic idea of what i am looking for.
can we make suggestions for new modules here?
If so i would like a new module in the 3H format that will do the following:
-knob to select voltage -10 - +10 -CV input for this knob -CV inverter switch -reset jack -mode button (trigger/toggle/gate/always on/latch) -output jack that will output the voltage based on the mode. -trigger jack will accept either a trigger or gate no matter what mode is set.
basically, if the CV input is used it will just resend the CV voltage, and if no CV input is connected it will send the voltage selected with the knob.
if mode is trigger when a trigger/gate is received it will pulse the output voltage as a "trigger"
if the mode is toggle each consecutive trigger/gate will toggle the output on/off
if the mode is gate the output voltage will be sent as long as the gate is held high or in the case of a trigger activating the module a predefined gate length is sent (selectable with a knob?)
if mode is always on the voltage will be sent continuously unless a trigger/gate is received (trigger/Gate inverter)
if the mode is "latch" the voltage will be sent when a trigger/gate is received and will remain on until the mode is changed, or a reset trigger is received on the reset jack.
this is very similar to an existing module but has a few more options. most importantly the latch idea. it will give several functions in one module.
-constant voltage source -switched voltage source with several switching schemes -a latching gate -Trigger/Gate inverter -Trigger/Gate converter -voltage inverter
if further information is needed I am happy to talk in greater detail. but i think this gives the basic idea of what i am looking for.