Closed BusTrackerPSU closed 5 years ago
We got it working after connection to AT&T so that is the issue.
Can we route the sms to use data only or will it charge as a sms as well?
Yep you can route it: https://github.com/botletics/SIM7000-LTE-Shield/wiki/SMS-Messages#hologram-sms-route
What you can do is send SMS to Hologram then have Hologram route it, either as SMS or other data form.
Setup: Arduino Uno board with the Bothletics Sim7000a shield on top with a LiPo 3.7V 2000mah battery connected as well as the USB plugged into the UNO to the computer,
We are using LTE_Demo example code with a hologram sim card. Activated the sim card and It is connected Successfully to Verizon IoT network using the Hologram simcard, when on the serial monitor typing "s" to send a SMS message to a phone number in the US and we are located in the US. it says Failed.
We also went on the Hologram.io and send a SMS to the device and it just doesn't receive. when we press "G"it says everything is okay APN is hologram everything is correct.
I saw that Verizon had a +88 code for outgoing SMS. not sure if its being blocked. Any Ideas?
I can give you more information if you need.