BOM not found

[msg94]

Can you tell me where the BOM is or the link?

[midikeyboard]

Can you tell me where the BOM is or the link?

there is no BOM as mentioned in the readme. you can use the CAD file for sourcing and guiding

[ThunderClap86]

"All screw sizes and types are properly documented in the CAD (soon there will be a conversion BOM also). Also no more “exotic” sizes, everything is according to what VORON is using officially."

Any word when the BOM might be released, cannot use CAD currently as my hardware prevents it.

[midikeyboard]

i dont have an update but you could look into this repo:

https://github.com/RobotRogue/Enderwire_Docs

[YoungHillionaire]

Use the siboor ender switchwire fasteners kit It has all the necessary screws I just converted my Ender 3 Neo It was missing an M3X30 SCHS only Had 15 screws while CAD uses 16 4 for X motor mount and 4 for Z motor mount And 4 for each z bearing block Luckily it was included in the spares

[christianbundy]

Trust at your own risk: I went through the "gantry" component and compiled a BOM, here's what I found:

• X Axis Assembly
  • 2020 Extrusion 310mm
  • MGN12 Linear Guide Subassembly, 12H
  • MGN12 Linear Guide Rail 300mm
  • 4 × M3x8 SHCS
  • Z Bearing Block — Left
  • 2 × M3 Threaded Insert
  • 2 × M5x40 SHCS
  • 4 × M3x30 SHCS
  • 2 × M3x12 SHCS
  • Z Bearing Block — Right
  • 4 × M3 Threaded Insert
  • 4 × M3x30 SHCS
  • 2 × M5x40 SHCS
  • XZ Block — Right
  • 4 × F695-2RS Bearings
  • 4 × M5 1mm Spacer
  • M3x16 SHCS
  • 2 × M5x30 BHCS
  • M5x10 BHCS
  • XZ Block — Left
  • 4 × F695-2RS Bearings
  • 4 × M5 1mm Spacer
  • M3x16 SHCS
  • 2 × M5x30 BHCS
  • M5x10 BHCS
  • Stealthburner Assembly: NOT INCLUDED (Assumed to be stock, no changes required)
• Z Motor Assembly
  • NEMA17 Motor
  • GT2 20T 6mm Pulley
  • M3 Threaded Insert
  • 2 × M5x16 BHCS
  • 4 × M3x30 SHCS
  • M3x40 SHCS
• X Motor Assembly
  • NEMA17 Motor
  • GT2 20T 6mm Pulley
  • M3 Threaded Insert
  • 2 × M5x16 BHCS
  • 4 × M3x30 SHCS
  • M3x40 SHCS
• Upper Block — Left
  • 4 × F695-2RS Bearings
  • 4 × M5 1mm Spacer
  • 2 × M5x40 SHCS
• Upper Block — Right
  • 4 × F695-2RS Bearings
  • 4 × M5 1mm Spacer
  • 2 × M5x40 SHCS
• Z Belt
• X Belt

Totals:

Part	Quantity
2020 Extrusion 310mm	1
F695-2RS	16
GT2 20T 6mm Powge	2
M3 Threaded Insert	8
M3X30 SHCS	16
M3x12 SHCS	2
M3x16 SHCS	2
M3x40 SHCS	2
M3x8 SHCS	4
M5 1mm Spacer	16
M5X10 BHCS	2
M5x16 BHCS	4
M5x30 BHCS	4
M5x40 SHCS	8
MGN12 LINEAR GUIDE RAIL 300mm	1
NEMA17	2
X Belt	1
Z Belt	1

I'm a bit skeptical, because elsewhere I've read "20 × F695-2RS" pretty consistently, so I'd advise double-checking the CAD and/or just ordering a few extras in case I've made some mistakes.