bout100 / er9x

Automatically exported from code.google.com/p/er9x
0 stars 0 forks source link

EXIT key does not work. #741

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1.Press menu and can not get out.
2.
3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?
svn: er9x-r809
vers: v1.104-Mike

Please provide any additional information below.

Original issue reported on code.google.com by leopezz...@gmail.com on 7 Feb 2014 at 11:36

GoogleCodeExporter commented 9 years ago
Please provide more detailed information, exactly what you press when, and then 
what doesn't work. r809 has been available for a little while with no mention 
of this sort of problem.

Original comment by michael....@mypostoffice.co.uk on 8 Feb 2014 at 9:36

GoogleCodeExporter commented 9 years ago
sorry my english sucks. When i walk into any menu i can not leave. exit button 
just does not work at all. already tested with this uinit and it ok.
tks. 

Original comment by leopezz...@gmail.com on 9 Feb 2014 at 8:35

GoogleCodeExporter commented 9 years ago
I don't think this is a firmware problem. Try going to the DIAG menu (LEFT 
LONG, LEFT, LEFT, LEFT) and seeing if the EXIT button shows it works (0 changes 
to 1).
Try either a previous revision of the firmware, or the test version of the next 
release from here http://openrcforums.com/forum/viewtopic.php?f=5&t=4598#p64969.
If you are not a member of openrcforums, it will be easier to help if register 
there and post your problem.

Original comment by michael....@mypostoffice.co.uk on 9 Feb 2014 at 10:42

GoogleCodeExporter commented 9 years ago
already entered on this screen and it does not change so is zero, as if the key 
were damaged, but with the multimeter shows that this ok.

Original comment by leopezz...@gmail.com on 9 Feb 2014 at 10:31

GoogleCodeExporter commented 9 years ago
I tried another version but the error continues, it seems the problem is on the 
radio, the strange and the button worked before updating the firmware.

Original comment by leopezz...@gmail.com on 10 Feb 2014 at 1:32

GoogleCodeExporter commented 9 years ago
have the same problem here. everything works bt the exit button. I programed 
the controler ok, but had to turn it off and on again everytime i had to go 
back on the menu.

Have you solved your problem?

Original comment by icaro.ho...@gmail.com on 22 Mar 2014 at 1:25

GoogleCodeExporter commented 9 years ago
yea. discovered when soldering the wire to return the firmware just burning a 
smd resistors, after discovering Comm resistor soldered one and it worked. ok?

Original comment by leopezz...@gmail.com on 23 Mar 2014 at 11:19

GoogleCodeExporter commented 9 years ago
Mine is the Menu button that stop working after firmware update.
I dont know what happened.
Just stop working.
Any clues?
thanks

Original comment by carlosgu...@gmail.com on 12 May 2014 at 8:48

GoogleCodeExporter commented 9 years ago
Try the suggestions at #3 above. If the menu button does not respond, it will 
be easier to help if you could post the problem on openrcforums. Others, as 
well as myself can post suggestions there.

Original comment by michael....@mypostoffice.co.uk on 12 May 2014 at 9:43