scabbard1980
commented
1 year ago Is there any way to create an ESP home Hubitat driver for the smart dry? I have followed all instruction and can connect to the ESP 32, but no sensoesphome: name: smart-dry-hubitat
esp32: board: esp32dev framework: type: arduino
Enable logging
logger:
Enable Home Assistant API
api:
ota: password: "71c4197462e7973adb576caed2ede47e"
wifi: ssid: My Router password: 13marshall!
Enable fallback hotspot (captive portal) in case wifi connection fails
ap: ssid: "Smart-Dry-Hubitat" password: "SMUUAmATlYFP"
captive_portal:
esp32_ble_tracker: on_ble_manufacturer_data_advertise:
- manufacturer_id: "01AE"
then:
- lambda: |- id(raw_sensor).publish_state(format_hex(x)); uint32_t temp = (x[0] + (x[1] << 8) + (x[2] << 16) + (x[3] << 24)); uint32_t hum = (x[4] + (x[5] << 8) + (x[6] << 16) + (x[7] << 24)); uint16_t shake = x[8] + (x[9] << 8); uint8_t batt = x[10]; uint8_t wake = x[11]; id(temp_sensor).publish_state(((float ) &temp)); id(hum_sensor).publish_state(((float ) &hum)); id(shake_sensor).publish_state(shake); id(batt_sensor).publish_state(batt); id(wake_sensor).publish_state(wake);
sensor:
- platform: template name: "SmartDry Temperature" device_class: 'temperature' unit_of_measurement: "°C" accuracy_decimals: 4 id: temp_sensor
- platform: template name: "SmartDry Humidity" device_class: 'humidity' unit_of_measurement: "%" accuracy_decimals: 4 id: hum_sensor
- platform: template name: "SmartDry Shake" id: shake_sensor
- platform: template name: "SmartDry Battery" device_class: battery id: batt_sensor
- platform: template name: "SmartDry Awake" id: wake_sensor text_sensor:
- platform: template name: "SmartDry Raw" id: raw_sensorrs are showing up. This is the YAML.
1) Quora smart curtain support I added previously was reporting backwards, changed lines 372, 443, 477, 1345, 1346 to correct.
2) Added support for GoSund SW7 Dual Dimmer by changes in lines 146, 155, 1321, 1431 and new GoSund SW7 Component Driver