Open dbox2jumbo opened 7 years ago
dbox2jumbo
commented
7 years ago Maybe the issue is there, because the (old) dvb hardware? I am using an old skystar1 card.
(I had exactly the same problem with vtuner - virtual tuner, pc on server side with the skystar1, dreambox as client. Oscam process ecm pid on client box, but no pic on scrambled channels. Problem gone, when i switched to dreambox also on server side.)
kslimani
commented
7 years ago @dbox2jumbo i never used oscam, but i think you should run MuMuDVB using -v argument and post output result. (will give MuMuDVB version, and debug informations)
Also providing configuration should help to try to resolve your issue.
dbox2jumbo
commented
7 years ago Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://mumudvb.braice.net/ Project from the cr@ns (http://www.crans.org) by Brice DUBOST (mumudvb@braice.net)
WARN: SCAM_COMMON: You have enabled the support for software descrambling (scrambled channels). Please report any bug/comment Info: Main: New channel, current number 0 Info: Main: New channel, current number 1 Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README. Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README. Info: Main: ========== End of configuration, MuMuDVB version 2.0.0_20150614_mumudvb2 is starting ========== Info: Main: Streaming. Freq 12073000 Info: Tune: Using DVB card "ST STV0299 DVB-S" tuner 0 Info: Tune: Tuning DVB-S to Freq: 1473000 kHz, LO frequency 10600000 kHz Pol:V Srate=28000000, LNB number: 0 Info: Tune: LNB voltage 13V Info: Tune: Diseqc switch position specified, we force switch input to 1 Deb0: Tune: Test Diseqc message e0 10 39 f1 00 00 len 4 Deb0: Tune: Sending first Diseqc message e0 10 39 f1 00 00 len 4 Info: Tune: DISEQC SETTING SUCCEDED Deb0: Tune: polling.... Info: Tune: FE_STATUS: Deb0: Tune: polling.... Info: Tune: FE_STATUS: Info: Tune: FE_HAS_SIGNAL : found something above the noise level Info: Tune: FE_HAS_CARRIER : found a DVB signal Info: Tune: FE_HAS_VITERBI : FEC is stable Info: Tune: FE_HAS_SYNC : found sync bytes Info: Tune: FE_HAS_LOCK : everything's working... Info: Tune: Event: Frequency: 12073306 (or 9126694) Info: Tune: SymbolRate: 28000000 Info: Tune: FEC_inner: 7 Info: Tune: Bit error rate: 56832 Info: Tune: Signal strength: 42290 Info: Tune: SNR: 54030 Info: Main: Card 0, tuner 0 tuned main 0x7ffd4b040070 Info: Common chan: Looking through all services to update their filters Deb0: Common chan: Open the new filters WARN: DVB: An issue happened during the IOCTLS to take uncorrected blocks measurements error: Function not implemented Info: Common chan: We open the channel 0 multicast IPv4 socket address 239.100.0.1:1234 Info: Common chan: We open the channel 1 multicast IPv4 socket address 239.100.0.2:1234 Info: Autoconf: Autoconfiguration is now ready to work for you ! Info: Autoconf: The PAT version changed, channels have changed Info: Autoconf: New PAT we force SDT update after all sections seen WARN: Autoconf: Channel 0 SID 30614 Force PMT update WARN: Autoconf: Channel 1 SID 30605 Force PMT update WARN: Autoconf: Channel 2 SID 30601 Force PMT update WARN: Autoconf: Channel 3 SID 30602 Force PMT update WARN: Autoconf: Channel 4 SID 30603 Force PMT update WARN: Autoconf: Channel 5 SID 30604 Force PMT update WARN: Autoconf: Channel 6 SID 30606 Force PMT update WARN: Autoconf: Channel 7 SID 30607 Force PMT update WARN: Autoconf: Channel 8 SID 30608 Force PMT update WARN: Autoconf: Channel 9 SID 30609 Force PMT update WARN: Autoconf: Channel 10 SID 30610 Force PMT update WARN: Autoconf: Channel 11 SID 30611 Force PMT update WARN: Autoconf: Channel 12 SID 30612 Force PMT update WARN: Autoconf: Channel 13 SID 30613 Force PMT update WARN: Autoconf: Channel 14 SID 30615 Force PMT update WARN: Autoconf: Channel 15 SID 30616 Force PMT update WARN: Autoconf: Channel 16 SID 30617 Force PMT update WARN: Autoconf: Channel 17 SID 30618 Force PMT update WARN: Autoconf: Channel 18 SID 30619 Force PMT update Deb0: PAT Rewrite: NEW program for channel 0 : "ct24". PMT pid : 750 Deb0: PAT Rewrite: NEW program for channel 1 : "m1". PMT pid : 300 Info: Autoconf: The SDT version changed, channels description have changed Info: Autoconf: We update the channel names Info: Autoconf: We update the channel status Info: Autoconf: Looking through all channels to see if they are ready for streaming Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "B1", id 30601 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Acasa", id 30602 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "N24", id 30603 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "AMCHu", id 30604 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Auto Motor Sport", id 30606 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "m2 / Petofi", id 30607 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "HirTV", id 30608 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Discovery RO", id 30609 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "TVR 3", id 30610 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Zu TV", id 30611 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "m5", id 30612 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Cartoon Network RO", id 30613 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "HBO RO", id 30615 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "STORY5 ", id 30616 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "m5", id 30617 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Auto Motor Sport (SVT)", id 30618 Deb0: Autoconf: Service NOT in the service_id list, we skip. Name "Humor +", id 30619 Info: Autoconf: We update the channel filters Info: Common chan: Looking through all services to update their filters Deb0: Common chan: pid 300 added Deb0: Common chan: pid 750 added Deb0: Common chan: Open the new filters Info: Autoconf: We update the channel networking Deb0: SDT rewrite: Full SDT updated. section number 0, last_section_number 0 Deb0: Main: The SDT version changed, we force the update of all the channels. Deb0: SDT rewrite: NEW program for channel 0 : "ct24". service_id : 30614 Deb0: SDT rewrite: NEW program for channel 1 : "m1". service_id : 30605 Deb0: Autoconf: PIDs update Deb0: Autoconf: PID 301 added type Video (MPEG2) lang --- Deb0: Autoconf: PID 310 added type Audio (MPEG1) lang hun Deb0: Autoconf: PID 320 added type Teletext lang --- Deb0: Autoconf: pids : Deb0: Autoconf: 300 (PMT) Deb0: Autoconf: 301 (Video (MPEG2)) Deb0: Autoconf: 310 (Audio (MPEG1)) Deb0: Autoconf: 320 (Teletext) Deb0: Autoconf: PIDs for channel 1 "m1" : 300 301 310 320 Info: Common chan: Looking through all services to update their filters Deb0: Common chan: pid 301 added Deb0: Common chan: pid 310 added Deb0: Common chan: pid 320 added Deb0: Common chan: Open the new filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 30614 name : "ct24" Info: Autoconf: Multicast4 ip : 239.100.0.1:1234 Deb0: Autoconf: pids : 750 (PMT), Info: Autoconf: Channel number : 1, service id 30605 name : "m1" Info: Autoconf: Multicast4 ip : 239.100.0.2:1234 Deb0: Autoconf: pids : 300 (PMT), 301 (Video (MPEG2)), 310 (Audio (MPEG1) hun), 320 (Teletext), Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: Autoconf: PIDs update Deb0: Autoconf: PID 751 added type Video (MPEG2) lang --- Deb0: Autoconf: PID 761 added type Audio (MPEG1) lang cze Deb0: Autoconf: PID 770 added type Teletext lang --- Deb0: Autoconf: pids : Deb0: Autoconf: 750 (PMT) Deb0: Autoconf: 751 (Video (MPEG2)) Deb0: Autoconf: 761 (Audio (MPEG1)) Deb0: Autoconf: 770 (Teletext) Deb0: Autoconf: PIDs for channel 0 "ct24" : 750 751 761 770 Info: Common chan: Looking through all services to update their filters Deb0: Common chan: pid 751 added Deb0: Common chan: pid 761 added Deb0: Common chan: pid 770 added Deb0: Common chan: Open the new filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 30614 name : "ct24" Info: Autoconf: Multicast4 ip : 239.100.0.1:1234 Deb0: Autoconf: pids : 750 (PMT), 751 (Video (MPEG2)), 761 (Audio (MPEG1) cze), 770 (Teletext), Info: Autoconf: Channel number : 1, service id 30605 name : "m1" Info: Autoconf: Multicast4 ip : 239.100.0.2:1234 Deb0: Autoconf: pids : 300 (PMT), 301 (Video (MPEG2)), 310 (Audio (MPEG1) hun), 320 (Teletext), Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Deb0: TS: GOOD service_id for PMT 300 and channel "m1" Info: Main: Channel "m1" down.Card 0 Info: SCAM_CAPMT: sent CAPMT message to socket for channel m1, toWrite=103 wrote=103 Info: SCAM_GETCW: Got CA_SET_PID with pid: 301 setting channel m1 ca_idx 1 Info: Main: Channel "m1" is now highly scrambled (93% of scrambled packets). Card 0 Info: Main: Channel "m1" back.Card 0 Info: Main: Channel "m1" is now partially unscrambled (19% of scrambled packets). Card 0 Info: Autoconf: The NIT version changed, channels number could have changed ! Deb0: Autoconf: NIT 1 sections on 1 are missing Info: Main: Channel "m1" is now fully unscrambled (0% of scrambled packets). Card 0 Info: Autoconf: We got the NIT, we update the channel names
oscam logfile 19:55:43 1E10060 c [ADD PID 0] CAID: 1815 ECM_PID: 1389 PROVID: 000000 19:55:43 1E10060 c [ADD PID 1] CAID: 0B02 ECM_PID: 15E4 PROVID: 000000 19:55:43 1E10060 c [ADD PID 2] CAID: 0D97 ECM_PID: 170D PROVID: 000000 19:55:43 1E10060 c [ADD PID 3] CAID: 0653 ECM_PID: 1839 PROVID: 000000 19:55:43 1E10060 c [ADD STREAM 0] CAID: 1815 ECM_PID: 1389 PROVID: 000000 19:55:43 1E10060 c [ADD STREAM 1] CAID: 0B02 ECM_PID: 15E4 PROVID: 000000 19:55:43 1E10060 c [ADD STREAM 2] CAID: 0D97 ECM_PID: 170D PROVID: 000000 19:55:43 1E10060 c [ADD STREAM 3] CAID: 0653 ECM_PID: 1839 PROVID: 000000 19:55:43 1E10060 c Found 4 ECMpids and 3 STREAMpids in PMT 19:55:43 1E10060 c [DVBAPI] Receiver wants to demux srvid 778D on adapter 0000 camask 0001 index 0000 pmtpid 0000 19:55:43 1E10060 c New program number: 778D (1815:778D unknown) [pmt_list_management 3] 19:55:43 1E10060 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 0D97 PROVID 000000 ECMPID 170D ANY CHID PMTPID 0000 VPID 012D 19:55:43 1E10060 c mumudvb (0D97&000004/0000/778D/F0:17B4081FE3F49909D12BC00327AAE278): cache1 (16 ms) by upc_direct 19:55:44 1E10060 c mumudvb (0D97&000004/0000/778D/F0:9BB7FE99F79BBDB998851A4EBA71D1BF): found (168 ms) by upc_direct 19:55:54 1E10060 c mumudvb (0D97&000004/0000/778D/F0:57310C57AD5ADD30B4C53BB406C724D1): found (167 ms) by upc_direct 19:56:04 1E10060 c mumudvb (0D97&000004/0000/778D/F0:A2E95CF1529FF10AA78ABB832200B53D): found (168 ms) by upc_direct 19:56:14 1E10060 c mumudvb (0D97&000004/0000/778D/F0:9C88060DF4536D57BC1CF6503EA4F3F7): found (168 ms) by upc_direct 19:56:24 1E10060 c mumudvb (0D97&000004/0000/778D/F0:FD5232211C49384836AE59D042F211EC): found (168 ms) by upc_direct 19:56:34 1E10060 c mumudvb (0D97&000004/0000/778D/F0:69D0F542B7F50B85484028FA76A7F9B2): found (170 ms) by upc_direct 19:56:44 1E10060 c mumudvb (0D97&000004/0000/778D/F0:97F86F185AC426F57BD2E99017CE6C5E): found (169 ms) by upc_direct 19:56:54 1E10060 c mumudvb (0D97&000004/0000/778D/F0:0A784A9061D3A427246752B900DBDB3A): found (169 ms) by upc_direct
oscam.conf [dvbapi] enabled = 1 au = 1 boxtype = pc user = mumudvb pmt_mode = 4 request_mode = 1
mumudvb.conf freq=12073 pol=v srate=28000 coderate=7/8 autoconfiguration=full autoconf_sid_list=30614 30605 switch_input=1 switch_type=U sap=0 scam_support=1
new_channel service_id=30614 ip=239.100.0.1 oscam=0 name=ct24
new_channel service_id=30605 ip=239.100.0.2 oscam=1 name=m1
Please help! I can't get any scrambled channels work with mumudvb+oscam combo. I can see ecm request+answer in oscam, and see CW-s at mumudvb:
Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 30614 name : "CT24" Info: Autoconf: Multicast4 ip : 239.100.0.1:1234 Info: Autoconf: Channel number : 1, service id 30605 name : "m1" Info: Autoconf: Multicast4 ip : 239.100.0.2:1234
Deb1: SCAM_DECSA: 00000000cdd2a191 odd key 62 9b a6 a3 d4 58 e9 15, channel m1
239.100.0.1:1234:CT24:FullyUnscrambled (FTA channel) 239.100.0.2:1234:m1:FullyUnscrambled
CW is valid. (Scrambled) stream is at the client on 239.100.0.2, there is no error message with -vvv option. What i am doing wrong?