braice
commented
7 years ago Hello
Indeed this is not normal. Can you give me the output of both scan-s2 and mumudvb in very very verbose mode (-vvv) it will help me to compare the diseqc messages.
Also can you try with delivery system set to DVB-S2?
Thank you
Brice
On Apr 9, 2017 10:03, "dorijan" notifications@github.com wrote:
Hi, I would like to thank you first for making this great app :) But I have issue with my new TurboSight TBS 6904 card. It seems not able to change diseq when using MuMuDVB, but when I change it with their scan it works. So this is the issue: in scan file I have S1 10721000 H 27500000 3/4 AUTO QPSK
and when I scan it with their sw ` ./scan-s2 ../toscan.conf -s 0 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
tune to: 10721:hC34M2S0:S0.0W:27500: DVB-S IF freq is 971000 parse_section, section number 0 out of 2...! Network Name 'ASTRA 1' parse_section, section number 0 out of 0...! service_id = 0x0 service_id = 0x12D pmt_pid = 0x20 service_id = 0x12E pmt_pid = 0x6E parse_section, section number 0 out of 0...! OTHER : PID 0x0078 TYPE 0x24 OTHER : PID 0x0082 TYPE 0x06 parse_section, section number 1 out of 2...! Network Name 'ASTRA 1' parse_section, section number 0 out of 0...! OTHER : PID 0x0021 TYPE 0x24 OTHER : PID 0x0024 TYPE 0x0F parse_section, section number 2 out of 2...! Network Name 'ASTRA 1' parse_section, section number 0 out of 0...! 0x0419 0x012D: pmt_pid 0x0020 (null) -- HLG teststream (running) 0x0419 0x012E: pmt_pid 0x006E NRJTV -- Test technique UHD NRJ (running) dumping lists (2 services) Done.`
`./scan-s2 ../toscan.conf -s 1 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
tune to: 10721:hC34M2S0:S0.0W:27500: DVB-S IF freq is 971000 parse_section, section number 0 out of 0...! service_id = 0x0 service_id = 0x11F9 pmt_pid = 0x100 service_id = 0x11FA pmt_pid = 0x164 service_id = 0x11FB pmt_pid = 0x1C8 parse_section, section number 0 out of 0...! OTHER : PID 0x01C9 TYPE 0x24 OTHER : PID 0x01CA TYPE 0x0F parse_section, section number 0 out of 0...! OTHER : PID 0x0101 TYPE 0x24 OTHER : PID 0x0102 TYPE 0x11 OTHER : PID 0x0103 TYPE 0x11 parse_section, section number 0 out of 0...! OTHER : PID 0x0165 TYPE 0x24 OTHER : PID 0x0166 TYPE 0x0F parse_section, section number 0 out of 0...! parse_section, section number 0 out of 0...! 0x2B5C 0x11F9: pmt_pid 0x0100 SPI -- Funbox UHD (running, scrambled) 0x2B5C 0x11FA: pmt_pid 0x0164 (null) -- C4K360 (running) 0x2B5C 0x11FB: pmt_pid 0x01C8 (null) -- TravelXP 4K (running) dumping lists (3 services) Done.`
`./scan-s2 ../toscan.conf -s 2 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
tune to: 10721:hC34M2S0:S0.0W:27500: DVB-S IF freq is 971000 parse_section, section number 0 out of 0...! service_id = 0x0 service_id = 0x385 pmt_pid = 0x6E service_id = 0x386 pmt_pid = 0x78 service_id = 0x387 pmt_pid = 0x82 service_id = 0x388 pmt_pid = 0x8C service_id = 0x389 .... parse_section, section number 0 out of 0...! 0x4E84 0x0385: pmt_pid 0x006E OiV Zagreb -- HRT-TV1 (running) 0x4E84 0x0386: pmt_pid 0x0078 OiV Zagreb -- HRT-TV2 (running, scrambled) 0x4E84 0x0387: pmt_pid 0x0082 OiV Zagreb -- HRT-TV3 (running, scrambled) 0x4E84 0x0388: pmt_pid 0x008C OiV Zagreb -- HRT-TV4 (running) 0x4E84 0x0389: pmt_pid 0x0096 OiV Zagreb -- HRT-HR1 (running) 0x4E84 0x038A: pmt_pid 0x00A0 OiV Zagreb -- HRT-HR2 (running) 0x4E84 0x038B: pmt_pid 0x00AA OiV Zagreb -- HRT-HR3 (running) 0x4E84 0x038C: pmt_pid 0x00B4 OiV Zagreb -- VOICE OF CRO (running) 0x4E84 0x038D: pmt_pid 0x00BE OiV Zagreb -- HRT R-Pula (running) 0x4E84 0x038E: pmt_pid 0x00C8 OiV Zagreb -- HKR (running) 0x4E84 0x0399: pmt_pid 0x00D2 OiV Zagreb -- RTS SAT (running) 0x4E84 0x039A: pmt_pid 0x00DC OiV Zagreb -- RADIO BEOGRAD 1 (running) 0x4E84 0x05DD: pmt_pid 0x0136 OiV Zagreb -- SLO-TV1 (running) 0x4E84 0x05DE: pmt_pid 0x0140 OiV Zagreb -- SLO-TV2 (running) 0x4E84 0x05DF: pmt_pid 0x014A OiV Zagreb -- SLO-TV3 (running) 0x4E84 0x05E7: pmt_pid 0x015E OiV Zagreb -- SLO-RA1-INF (running) 0x4E84 0x05E8: pmt_pid 0x0168 OiV Zagreb -- SLO-RA2 (running) 0x4E84 0x05E9: pmt_pid 0x0172 OiV Zagreb -- SLO-RA3 (running) 0x4E84 0x05ED: pmt_pid 0x0186 OiV Zagreb -- RADIO SI (running) parse_section, section number 0 out of 0...! Network Name 'OIV Platform Zagreb' dumping lists (19 services) HRT-TV1;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:111:112=hrv:115:0: 901:366:20100:0 HRT-TV2;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:121:122=hrv:125:0: 902:366:20100:0 HRT-TV3;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:131:132=hrv:135:0: 903:366:20100:0 HRT-TV4;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:141:142=hrv:145:0: 904:366:20100:0 HRT-HR1;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:152=hrv:0:0:905: 366:20100:0 HRT-HR2;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:162=hrv:0:0:906: 366:20100:0 HRT-HR3;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:172=hrv:0:0:907: 366:20100:0 VOICE OF CRO;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:182=hrv:0:0:908: 366:20100:0 HRT R-Pula;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:192=hrv:0:0:909: 366:20100:0 HKR;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:202=hrv:0:0:910: 366:20100:0 RTS SAT;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:211:212=srp:215:0: 921:366:20100:0 RADIO BEOGRAD 1;OiV Zagreb:10720:hC34M2O35S0:S16. 0E:27500:0:222=srp:0:0:922:366:20100:0 SLO-TV1;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:311:312=slv:315:0: 1501:366:20100:0 SLO-TV2;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:321:322=slv:315:0: 1502:366:20100:0 SLO-TV3;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:331:332=slv:315:0: 1503:366:20100:0 SLO-RA1-INF;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:352:0:0:1511:366: 20100:0 SLO-RA2;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:362:0:0:1512:366: 20100:0 SLO-RA3;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:372:0:0:1513:366: 20100:0 RADIO SI;OiV Zagreb:10720:hC34M2O35S0:S16.0E:27500:0:392:0:0:1517:366: 20100:0 ` So, as you can see, changing diseqc with -s X works
But when I try with MuMuDVB I allways tune to this
`#delivery_system=DVBS freq=10721 pol=H srate=27500
coderate=3/4
sat_number=2
switch_input=2
switch_type=C
rolloff=auto
diseqc_repeat=1
modulation=QPSK
autoconfiguration=full autoconf_ip4=239.100.4.%number mumudvb -d -c mmumu04s.conf MuMuDVB Version 2.1.0_20170408_mumudvb2 --- Build information --- Built without CAM support. Built without SCAM support. Built with ATSC support. Built with support for DVB API Version 5.10. Built with support for DVB-T2.
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://mumudvb.braice.net/ Project from the cr@ns (http://www.crans.org) by Brice DUBOST (mumudvb@braice.net)
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README. Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README. Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README. Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20170408_mumudvb2 is starting ========== WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter2_tuner0: No such file or directory WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter2_tuner0: No such file or directory Info: Main: Streaming. Freq 10721000 Info: Tune: Using DVB card "TurboSight TBS 6904 DVBS/S2 frontend" tuner 0 Info: Tune: Tuning DVB-S to Freq: 971000 kHz, LO frequency 9750000 kHz Pol:H Srate=27500000, LNB number: 2 Info: Tune: LNB voltage 18V Info: Tune: DISEQC SETTING SUCCEDED Info: Tune: FE_STATUS: Info: Tune: FE_STATUS: Info: Tune: FE_HAS_SIGNAL : found something above the noise level Info: Tune: FE_HAS_CARRIER : found a DVB signal Info: Tune: FE_HAS_VITERBI : FEC is stable Info: Tune: FE_HAS_SYNC : found sync bytes Info: Tune: FE_HAS_LOCK : everything's working... Info: Tune: Event: Frequency: 10721000 (or 8779000) Info: Tune: SymbolRate: 23500000 Info: Tune: FEC_inner: 2051 Info: Tune: Bit error rate: 67108863 Info: Tune: Signal strength: 27526 Info: Tune: SNR: 51117 Info: Main: Card 2, tuner 0 tuned main 0x7ffc60452d50 Info: Common chan: Looking through all services to update their filters Info: Autoconf: Autoconfiguration is now ready to work for you ! Info: Autoconf: The PAT version changed, channels have changed Info: Autoconf: New PAT we force SDT update after all sections seen WARN: Autoconf: Channel 0 SID 301 Force PMT update WARN: Autoconf: Channel 1 SID 302 Force PMT update Info: Autoconf: The NIT version changed, channels number could have changed ! Info: Autoconf: The SDT version changed, channels description have changed Info: Autoconf: We update the channel names Info: Autoconf: We update the channel status Info: Autoconf: Looking through all channels to see if they are ready for streaming Info: Autoconf: We update the channel filters Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel networking Info: Common chan: We open the channel 0 multicast IPv4 socket address 239.100.4.0:1234 Info: Common chan: We open the channel 1 multicast IPv4 socket address 239.100.4.1:1234 Info: Main: Channel "HLG teststream" down.Card 2 Info: Main: Channel "Test technique UHD NRJ" down.Card 2 Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 301 name : "HLG teststream" Info: Autoconf: Multicast4 ip : 239.100.4.0:1234 Info: Autoconf: Channel number : 1, service id 302 name : "Test technique UHD NRJ" Info: Autoconf: Multicast4 ip : 239.100.4.1:1234 Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 301 name : "HLG teststream" Info: Autoconf: Multicast4 ip : 239.100.4.0:1234 Info: Autoconf: Channel number : 1, service id 302 name : "Test technique UHD NRJ" Info: Autoconf: Multicast4 ip : 239.100.4.1:1234 Info: Main: Channel "HLG teststream" back.Card 2 Info: Main: Channel "Test technique UHD NRJ" back.Card 2 ` But nothing changes if I change sat_number or switch_input, I tried all combinations p.s. scan that works I got from here http://www.tbsiptv.com/index.php?route=product/download/drivers&id=13 I was using v170330
Please help. Thank you
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/braice/MuMuDVB/issues/169, or mute the thread https://github.com/notifications/unsubscribe-auth/AAUUDw5dbzv177NsqLXigk5F5DS-094rks5ruOUlgaJpZM4M4CMR .
SourceDoctor
dorijan
m0yellow
Hi, I would like to thank you first for making this great app :) But I have issue with my new TurboSight TBS 6904 card. It seems not able to change diseq when using MuMuDVB, but when I change it with their scan it works. So this is the issue: in scan file I have
S1 10721000 H 27500000 3/4 AUTO QPSKand when I scan it with their sw ` ./scan-s2 ../toscan.conf -s 0 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
`./scan-s2 ../toscan.conf -s 1 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
`./scan-s2 ../toscan.conf -s 2 API major 5, minor 3 scanning ../toscan.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 10721000 H 27500000 3/4 AUTO QPSK ----------------------------------> Using DVB-S
But when I try with MuMuDVB I allways tune to this
`#delivery_system=DVBS freq=10721 pol=H srate=27500
coderate=3/4
sat_number=2
switch_input=2
switch_type=C
rolloff=auto
diseqc_repeat=1
modulation=QPSK
autoconfiguration=full autoconf_ip4=239.100.4.%number
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://mumudvb.braice.net/ Project from the cr@ns (http://www.crans.org) by Brice DUBOST (mumudvb@braice.net)
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README. Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README. Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README. Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20170408_mumudvb2 is starting ========== WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter2_tuner0: No such file or directory WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter2_tuner0: No such file or directory Info: Main: Streaming. Freq 10721000 Info: Tune: Using DVB card "TurboSight TBS 6904 DVBS/S2 frontend" tuner 0 Info: Tune: Tuning DVB-S to Freq: 971000 kHz, LO frequency 9750000 kHz Pol:H Srate=27500000, LNB number: 2 Info: Tune: LNB voltage 18V Info: Tune: DISEQC SETTING SUCCEDED Info: Tune: FE_STATUS: Info: Tune: FE_STATUS: Info: Tune: FE_HAS_SIGNAL : found something above the noise level Info: Tune: FE_HAS_CARRIER : found a DVB signal Info: Tune: FE_HAS_VITERBI : FEC is stable Info: Tune: FE_HAS_SYNC : found sync bytes Info: Tune: FE_HAS_LOCK : everything's working... Info: Tune: Event: Frequency: 10721000 (or 8779000) Info: Tune: SymbolRate: 23500000 Info: Tune: FEC_inner: 2051 Info: Tune: Bit error rate: 67108863 Info: Tune: Signal strength: 27526 Info: Tune: SNR: 51117 Info: Main: Card 2, tuner 0 tuned main 0x7ffc60452d50 Info: Common chan: Looking through all services to update their filters Info: Autoconf: Autoconfiguration is now ready to work for you ! Info: Autoconf: The PAT version changed, channels have changed Info: Autoconf: New PAT we force SDT update after all sections seen WARN: Autoconf: Channel 0 SID 301 Force PMT update WARN: Autoconf: Channel 1 SID 302 Force PMT update Info: Autoconf: The NIT version changed, channels number could have changed ! Info: Autoconf: The SDT version changed, channels description have changed Info: Autoconf: We update the channel names Info: Autoconf: We update the channel status Info: Autoconf: Looking through all channels to see if they are ready for streaming Info: Autoconf: We update the channel filters Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel networking Info: Common chan: We open the channel 0 multicast IPv4 socket address 239.100.4.0:1234 Info: Common chan: We open the channel 1 multicast IPv4 socket address 239.100.4.1:1234 Info: Main: Channel "HLG teststream" down.Card 2 Info: Main: Channel "Test technique UHD NRJ" down.Card 2 Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 301 name : "HLG teststream" Info: Autoconf: Multicast4 ip : 239.100.4.0:1234 Info: Autoconf: Channel number : 1, service id 302 name : "Test technique UHD NRJ" Info: Autoconf: Multicast4 ip : 239.100.4.1:1234 Info: Common chan: Looking through all services to update their filters Info: Autoconf: We update the channel CAM support Info: Autoconf: Diffusion 2 channels Info: Autoconf: Channel number : 0, service id 301 name : "HLG teststream" Info: Autoconf: Multicast4 ip : 239.100.4.0:1234 Info: Autoconf: Channel number : 1, service id 302 name : "Test technique UHD NRJ" Info: Autoconf: Multicast4 ip : 239.100.4.1:1234 Info: Main: Channel "HLG teststream" back.Card 2 Info: Main: Channel "Test technique UHD NRJ" back.Card 2 ` But nothing changes if I change sat_number or switch_input, I tried all combinations p.s. scan that works I got from here I was using v170330
Please help. Thank you