stulluk
commented
1 year ago Also tried "delivery_system" and "modulation" but this time it can't lock to TP at all:
stulluk ~/mumu $ cat 11054v30000.conf
tuner=1
freq=11054
pol=v
srate=30000
#lnb_type=universal
#sat_number=1
#switch_type=C
switch_input=1
#diseqc_repeat=1
#coderate=auto
lnb_slof=11700
lnb_lof_low=9750
lnb_lof_high=10600
delivery_system=DVBS2
modulation=8PSK
autoconfiguration=full
stulluk ~/mumu $ mumudvb -c 11054v30000.conf --dumpfile new2.ts -d -t
WARN: Main: You've decided to dump the received stream into new2.ts. Be warned, it can grow quite fast
MuMuDVB Version 2.1.0_5e9959e366b815ac498f2dc2823ac028d59a5d5f
--- Build information ---
Built with CAM support.
Built without SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.11.
Built with support for DVB-T2.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST (mumudvb@braice.net)
Info: Tune: You will use DVB API version 5 for tuning your card.
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README.
Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_5e9959e366b815ac498f2dc2823ac028d59a5d5f is starting ==========
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner1: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner1: No such file or directory
Info: Main: Streaming. Freq 11054000.000000
Info: Tune: Using DVB card "TurboSight TBS 5530 DVB-T2/T/C/S/S2/S2x,ISDB-T,ATSC DVB-S/S2/S2X" tuner 1
Info: Tune: Tuning DVB-S to Freq: 1304000 kHz, Transp frequency: 11054000.000000 , LO frequency 9750000 kHz Pol:V Srate=30000000, LNB number: 0
Info: Tune: LNB voltage 13V
Info: Tune: Diseqc switch position specified, we force switch input to 1
Info: Tune: Sending DISEQC
Info: Tune: DISEQC: Setting Tone OFF
Info: Tune: DISEQC: Setting Voltage and wait 15 ms
Info: Tune: DISEQC: Send CMD and wait 15 ms
Info: Tune: DISEQC: Send BURST and wait 15 ms
Info: Tune: DISEQC: Set TONE back and wait 15 ms
Info: Tune: DISEQC SETTING SUCCEEDED - Frequency: 1304000
Info: Tune: Tuning With DVB-API version 5. delivery system : 6
Info: Tune: FE_STATUS:
Info: Tune: FE_STATUS:
Info: Tune: FE_STATUS:
Info: Tune: FE_STATUS:
Info: Tune: FE_STATUS:
^C
stulluk ~/mumu $
Saentist
braice
I just bought one TBS5530 and experimenting with Kaffeine and mumudvb. I have a multiswitch based antenna setup as follows:
Here is my TBS5530:
Kaffeine works perfectly:
I am trying to capture full TS of this transponder on Turksat: https://www.lyngsat.com/muxes/Turksat-3A_West_11054-V.html
With Kaffeine, I can lock to this TP and watch channel, without any signal problems and without any video artifacts:
I compiled mumudvb from the source ( latest commit as of now I guess).
Here is my configuration file and debug log:
So as you see, somehow, my device locks to wrong TP (Same polarity and SymRate but different frequency): https://www.lyngsat.com/muxes/Turksat-4A_West_11916-V.html
When calculating intermediate frequency, we get:
11054-9750 = 1304Mhz 11916-10600 =1316Mhz
Seems very close?
And when I play this "new2.ts" file with VLC or mplayer, I get TS discontinuity errors.
Is there a bug or my config is wrong ?