search

braice / MuMuDVB

A DVB IPTV streaming software
http://mumudvb.braice.net/
GNU General Public License v2.0
214 stars 133 forks source link

bug or hardware limitations ? #317

Open NicolasBastien opened 6 months ago

NicolasBastien commented 6 months ago

Hi. here my setup: I have two Quad LNB (for 28.6E and 5WB) connected to a Multiswitch and a single LNB (for 19.2E). I have 2 USB DVBS2 pctv 461e sticks. My 1rst USB stick is connected to the single LNB. The 2nd USB stick is connected to an output of my multiswitch. Mumudvb 2.1 runs on a debian 12 system, hosted in a promox VM (2CPU, 1GB of RAM allocated). NIC 1Gb The 2 USB Sticks are passedthrough in proxmox. Both sticks are externally powered.

1rst mumudvb instance (via the multiswitch) is used with 5WB to get radios streams. It works fine.

I face an issue with the second instance (the 19.2 single LNB). When I try to stream Astra radios (19.2°E 42Astra 1N 12285.00 V [94] DVB-S2 8PSK 29700 2/3 ASTRA 1, 57.5 Mb/s), my VLC client throws errors and audio is chopped. I use http unicast stream. I tried to swap the 2 USB sticks: the issue is the same with the new one. I tried another USB port: still the problem I tried another Sat transponder: still the problem I tried to play with thread settings in config: not better I've upgraded mumudvb from 1.7 to 2.1: the same issue. The VM perfs are OK I have no more idea of what I could try. Anyone would have an idea??

VLC output messages: vlc.txt

mumudvb output: mumudvb.txt

the config: card1.conf.txt

Saentist commented 6 months ago

Is test on real PC have been made?

braice commented 6 months ago

Hello

Is the issue more linked to the usb stick or the lnb I am not sure to understand. In some tuner modules you can enable or disable the card lna, have a look to lsmod and modinfo to dig further.

Sounds like a reception issue so far.

Brice

On Sun, Dec 17, 2023, 15:29 Nicolas BASTIEN @.***> wrote:

Hi. here my setup: I have two Quad LNB (for 28.6E and 5WB) connected to a Multiswitch and a single LNB (for 19.2E). I have 2 USB DVBS2 pctv 461e sticks. My 1rst USB stick is connected to the single LNB. The 2nd USB stick is connected to an output of my multiswitch. Mumudvb 2.1 runs on a debian 12 system, hosted in a promox VM (2CPU, 1GB of RAM allocated). NIC 1Gb The 2 USB Sticks are passedthrough in proxmox. Both sticks are externally powered.

1rst mumudvb instance (via the multiswitch) is used with 5WB to get radios streams. It works fine.

I face an issue with the second instance (the 19.2 single LNB). When I try to stream Astra radios (19.2°E 42Astra 1N 12285.00 V [94] DVB-S2 8PSK 29700 2/3 ASTRA 1, 57.5 Mb/s), my VLC client throws errors and audio is chopped. I use http unicast stream. I tried to swap the 2 USB sticks: the issue is the same with the new one. I tried another USB port: still the problem I tried another Sat transponder: still the problem I tried to play with thread settings in config: not better I've upgraded mumudvb from 1.7 to 2.1: the same issue. The VM perfs are OK I have no more idea of what I could try. Anyone would have an idea??

VLC output messages: vlc.txt https://github.com/braice/MuMuDVB/files/13695887/vlc.txt

mumudvb output: mumudvb.txt https://github.com/braice/MuMuDVB/files/13695889/mumudvb.txt

the config: card1.conf.txt https://github.com/braice/MuMuDVB/files/13695912/card1.conf.txt

— Reply to this email directly, view it on GitHub https://github.com/braice/MuMuDVB/issues/317, or unsubscribe https://github.com/notifications/unsubscribe-auth/AACRID7EV5CGLKZCQUSBDQ3YJ36VDAVCNFSM6AAAAABAYMVMQOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA2DKMRUGA3TKMQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>