Add Elgin Smart Color 10W - 48BLEDWIFI00

[djpremier]

Device information

Elgin Smart Color 10W - 48BLEDWIFI00 https://www.elgin.com.br/Produtos/casa-inteligente/lampadas-inteligentes/smart-color

Home Assistant Device information

Device info Smart Color (7elptlqhyajy4px6) by Tuya

Checklist

• [X] I have created a single PR per device. When you have multiple submissions please create separate PR's.
• [X] For lights - I have only included the gzipped files (*.gz), not the raw CSV files.
• [X] For lights - I have provided a CSV file per supported color mode. Look that up in Developer Tools -> States

Additional info

Hi,

Despite having used the TP-Link Tapo P110, the information had to be read through HomeAssistant due to a firmware update that does not allow direct connection to the socket. The tapo lib has already been updated to support this new version, so it would be interesting to adjust the project to be able to use it (I believe it makes the reading more accurate). As soon as I have some free time I will try to make the necessary changes to do so.

Below is a photo of the lamp label 😊

[github-actions[bot]]

Thank you for submitting light measurements! Here are some visualizations for the CSV files.

[bramstroker]

Thanks for the PR. Would be nice if you could make the direct Tapo API connection. Standby power in model.json is too high. Could you re measure that manually?

[djpremier]

Hi @bramstroker

I adjusted it to 0.8W, it fluctuates a lot using the TAPO P110 as a meter, but this is the average value over 3 hours of measurement. I also used another meter that I have here and it is also between 0.7 and 0.8 watts.