search

brandonlw / Psychson

Phison 2251-03 (2303) Custom Firmware & Existing Firmware Patches (BadUSB)
MIT License
4.12k stars 1.28k forks source link

I have successfully completed the demo1 #70

Open double-pulsar opened 9 years ago

double-pulsar commented 9 years ago

I have successfully completed the demo1 The "hello world" is worked,but when I want to flash a new hid-payload,I must shorting pins the usb drive.Direct flash a new fw.bin without shorting pins will appear the error "0079",why?Can I flash a new hid-payload without shorting pins?thanks By the way,What the demo2、demo3、No Boot Mode Patch for?what's they use?

f0xmulder commented 9 years ago

Hello,

New Payload and Boot mode ;

https://github.com/adamcaudill/Psychson/blob/master/docs/PinsToShortUponPlugInForBootMode.jpg

double-pulsar commented 9 years ago

@MeantCoder I have seen this picture,I just want to know how to flash a new hid-payload without shorting pins and what the demo2、demo3、No Boot Mode Patch for?

f0xmulder commented 9 years ago

Hello,

I'm Sorry I don't know :santa:

brunomarx commented 9 years ago

There is no need for shorting pins again. Once you have your Demo1 hid-payload running you can just install another hid-payload by following the same procedure using EmbedPayload and your FW.bin

double-pulsar commented 9 years ago

@brunomarx Must I install new hid-payload when it is running or it Finished running?BTW, What the demo2、demo3、No Boot Mode Patch for?what's they use?

jearyorg commented 9 years ago

I have successfully the demo1 too.But,I try other payload,the "DriveCom.exe" output error. Like that: Action spceified:SendExecuteable Fatal:System.InvalidOperationException:DeviceIoControl failed:0079

How can I do fixed this error. ：）

weny-tang commented 9 years ago

@jearyorg can you tell me where to buy the 2303 usb ? can you give me the taobao link? thank you very much!