search

bres55 / Smart-BMS-arduino-Reader

62 stars 16 forks source link

possible to use with 10s version? #3

Closed orhanyor closed 4 years ago

orhanyor commented 5 years ago

i checked out the supplier and he has bunch of other options too. is it possible to use this code with 10s version of the bms?

orhanyor commented 5 years ago

this must be the 10s version. https://www.aliexpress.com/item/32886356039.html?spm=2114.12010612.8148356.3.46637ae46T4WGW

ckbliss49 commented 5 years ago

I have a 11s and a 14s, it works with both.

ckbliss49 commented 5 years ago

DO NOT hook up the 5V from Arduino to the serial Vcc pin on the BMS. It will fry it. I learned that the hard way.

orhanyor commented 5 years ago

oh ok thanks for the tip, so i should connect only TX/RX and GND pins? also my arduino is 3.3v logic i guess bms serial pins are 5v right? then i have to use logic converter too or may be just for the tx pin of the bms?

bres55 commented 4 years ago

based on comments from ckbliss49, I will assume this works with 10s version of the bms