search

brett8883 / DJI_Super-NFZ_Eraser

Erase GeoZones from DJI aircraft
30 stars 15 forks source link

It doesn't work #1

Closed ferraript closed 5 years ago

ferraript commented 5 years ago

I started on stock 1.4.300 with my MPP. I flashed the bin file with that special DUMLdore. I tried multiple times. It always had two possible outcomes:

  1. DUMLdore got to 99 %, bird restarted and then Windows announced "DUMLdore has stopped working". I watched the whole flashing process in Task Manager and in one moment DUMLdore needed 1.6 GB of RAM!!! Who knows what it is doing...
  2. DUMLdore got to 99 %, bird restarted, DUMLdore announced it's safe to turn off the bird. So far so good. But... pulled nfz.db is definitely not empty, it's untouched 3 MB file.

@brett8883 : So as I have already asked once in DJI FC Patcher issue, I'm repeating my request once again. Please, if it's working for you, pull the nfz.db and nfz.sig files from the bird and share them. I'll try to push them to the bird and I believe it'll work this way. Thanks a lot.

brett8883 commented 5 years ago

Did you alt-click when you chose the .bin file in Dumldore_nfz_eraser_only? You have to alt+click load firmware.

brett8883 commented 5 years ago

https://github.com/brett8883/DJI_Super-NFZ_Eraser/tree/blank-nfz.bd Here's the blank nfz.db and nfz.sig. I dont recommend doing it this way but since you insist there it is

ferraript commented 5 years ago

You are right, I didn't alt-click. I thought that alt-click is for displaying all files in Open File Dialog. And since I saw desired bin file, I thought it wasn't necessary. Anyway I pushed those nfz files into Mavic and they are working just fine as I expected. So thank you for them.

brett8883 commented 5 years ago

I am glad to hear it worked great. The bin file that is in the repo is simply the stock 01.04.0300 .bin file with most of the modules removed just in case someone didn’t alt-click the “Load Firmware” button it wouldn’t flash over their flight controller and thus lose all settings 😜. There’s nothing special about it. As long as you press alt-Click then it could be any firmware file and it will work. Since so maybe people are making this same mistake maybe I should remove it but that’s why it’s there no other reason