Flashing tools for VW AG control units over UDS. Compression, encryption, RSA bypass, and checksums are supported for Simos18.1/6/10, DQ250-MQB, DQ381-MQB, and Haldex4Motion-Gen5-MQB.
On initial testing it seemed both stock & modified flashes resulted in a brick. It was also noted that the "Extract FRF" function when used on a Haldex FRF created a file with the incorrect length. The cause of both of these issues was the configured length for block 2 was incorrect.
Block length of 0x353A was identified from: FL_0CQ907554J__7084.odx. @bri3d Not sure if the original value was a typo or if potentially some earlier version have a different CAL length?
On initial testing it seemed both stock & modified flashes resulted in a brick. It was also noted that the "Extract FRF" function when used on a Haldex FRF created a file with the incorrect length. The cause of both of these issues was the configured length for block 2 was incorrect.
Block length of 0x353A was identified from:
FL_0CQ907554J__7084.odx. @bri3d Not sure if the original value was a typo or if potentially some earlier version have a different CAL length?