search

bri3d / VW_Flash

Flashing tools for VW AG control units over UDS. Compression, encryption, RSA bypass, and checksums are supported for Simos18.1/6/10, DQ250-MQB, DQ381-MQB, and Haldex4Motion-Gen5-MQB.
Other
315 stars 80 forks source link

Not finishing flashing HELP #124

Closed Hanziie closed 1 week ago

Hanziie commented 6 months ago

I'm getting this when trying to unclock ECU. result is the same with v0.6.0 and v0.5.4

Using tactrix (genuie). But i'm unsure if i need to install anything else from your windows downloads?

Screenshot 2024-03-27 203621 flash.log flash_details.log udsoncan.log

bri3d commented 6 months ago

Your ECU is responding with an incorrect response to the request for a Programming session. Is the immobilizer free and was the ECU already tuned with another tool?

On Wed, Mar 27, 2024 at 1:58 PM Hanziie @.***> wrote:

I'm getting this when trying to unclock ECU. result is the same with v0.6.0 and v0.5.4

Using tactrix (genuie). But i'm unsure if i need to install anything else from your windows downloads?

Screenshot.2024-03-27.203621.png (view on web) https://github.com/bri3d/VW_Flash/assets/109459870/79174295-822a-45f8-a6e7-233babc98f56 flash.log https://github.com/bri3d/VW_Flash/files/14780551/flash.log flash_details.log https://github.com/bri3d/VW_Flash/files/14780552/flash_details.log udsoncan.log https://github.com/bri3d/VW_Flash/files/14780553/udsoncan.log

— Reply to this email directly, view it on GitHub https://github.com/bri3d/VW_Flash/issues/124, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABTO2PML7CEHGD7XDZNLE3Y2MQG7AVCNFSM6AAAAABFLRM6MGVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIYTCNZYHA2TSMQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Hanziie commented 6 months ago

Immo is not sync'ed as this is a New(used) ecu with differens t power class

And I don't know if it's been tuned before

bri3d commented 6 months ago

Without immo being unlocked, the ECU will never enter OBD programming. You need to sync the immo online with ODIS or flash the ECU in boot mode.

On Thu, Mar 28, 2024 at 1:07 AM Hanziie @.***> wrote:

Immo is not sync'ed as this is a New(used) ecu with differens t power class

And I don't know if it's been tuned before

— Reply to this email directly, view it on GitHub https://github.com/bri3d/VW_Flash/issues/124#issuecomment-2024544068, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABTO2IM5J7P34TUR7M3CHLY2OXQTAVCNFSM6AAAAABFLRM6MGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMRUGU2DIMBWHA . You are receiving this because you commented.Message ID: @.***>

Hanziie commented 6 months ago

Can VW_FLASH Do this? I have a raspberry pi.