DSG DQ381 - Githubissues

MaddinMK7R commented 2 years ago

Is it possible to flash a DSG DQ381 in Golf7R with the DQ250 function? Identification of DQ381 was successful!

bri3d commented 2 years ago

Untested and it is a totally different control module with totally different code (as it is Bosch so they reused their existing OS tools so it's similar to Bosch ECU, vs DQ250 which is Temic).

I can look into it but not likely in current form.

MaddinMK7R commented 2 years ago

That would be great if you could check that. I could give you a log with ECU information and an original .frf file from my DQ381. I would also agree to test on my vehicle.

cipioh commented 2 years ago

I would like to upvote a request for DQ381 support!!

bri3d commented 2 years ago

I am attempting to implement DQ381 support. Right now it doesn't look like DQ381 has any RSA signatures or specialty checksums, just simple CRC32. The flash payload is encrypted using AES with a trivially silly key/IV, and compressed using what looks like standard LZSS.

I have implemented checksumming and what should be the correct basic flashing procedure.

It's ready for testing, but only by someone with another flashing tool which they can use to recover their control unit if the procedure fails.

MaddinMK7R commented 2 years ago

I wanted to test it today, I always get this error message, the same when trying to flash simos with this master version. No problems with the release version.

dashing module Abt loaded 2022-06-11 21:37:37 [ERROR] VWFlash: No 32534 DLLs found in HKLM PassThrusupport. Continuing anyway 2022-06-11 21:37:42 [ERROR] VWFlash: No 32534 DLLs found in HKLM PassThrusupport. Continuing anyway. 2022-06-11 21:37:50 (INFO] VWFlash: User selected: USBISOTP_ COM4 2022-06-11 21:41:08 [CRITICAL] VWFlash: Selected: C: \Users \T410 \Desktop\GOLF_7.5_R\D0381\ Tune\eGC308012A_16260cl 1 G7R Test MaMo 550Nm) - ) .bin 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_©1DATA because it has no version specifier. 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_O2DATA because it has no version specifier. 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_O3DATA because it has no version specifier. Exception in thread Thread-4: Traceback (most recent call last) : File "C: \Users\T410\ AppData\ Local \Programs \Python\Python39-32\lib\threading.py" , line 980, in _bootstrap_inner self.run() File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\threading.py",line917,inrun self._target(*self._args, *self. _Kwargs) File "C: \Users\T410\Desktop\VW_Flash-master\VW_Flash-master\lib\dq381_flash_utils.py",line234,inflash_bin prepared _blocks = prepare_blocks( File "C: \Users\T410\Desktop\VW_Flash-master\VW_Flash-master\lib\dq381_flash_utils.py",line102,inprepare_blo compressed_binary=lzss.lzss_compress(binary_data) File "C: \Users\T410 \Desktop\VW_Flash-master \VW_Flash-master\lib\lzss_helper.py",line 22, in lzss_compress p = subprocess.run( File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\subprocess.py",line505,inrun with Popen(popenargs, **kwargs) as process: File "C: \Users\T410\AppData\Local \Programs \Python \Python39-32\lib\subprocess.py" , line 951, in init self. •_execute_child(args, executable, preexec_fn, close_fds, File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\subprocess.py" , line 1420, in _execute child hp, ht, pid, tid = winapi.CreateProcess(executable,args, FileNotFoundError: [WinError 2] Das System kann die angegebene Datei nicht finden

bri3d commented 2 years ago

It’s missing lzss.exe. the automated build process should have made it. You can build it or copy it from an older version as it did not change. I am away for the weekend.

On Sat, Jun 11, 2022 at 5:05 PM MaddinMK7R @.***> wrote:

I wanted to test it today, I always get this error message, the same when trying to flash simos with this master version. No problems with the release version.

dashing module Abt loaded 2022-06-11 21:37:37 [ERROR] VWFlash: No 32534 DLLs found in HKLM PassThrusupport. Continuing anyway 2022-06-11 21:37:42 [ERROR] VWFlash: No 32534 DLLs found in HKLM PassThrusupport. Continuing anyway. 2022-06-11 21:37:50 (INFO] VWFlash: User selected: USBISOTP_ COM4 2022-06-11 21:41:08 [CRITICAL] VWFlash: Selected: C: \Users \T410 \Desktop\GOLF_7.5_R\D0381\ Tune\eGC308012A_16260cl 1 G7R Test MaMo 550Nm) - ) .bin 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_©1DATA because it has no version specifier. 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_O2DATA because it has no version specifier. 2022-06-11 21:41:08 [WARNING] VWFlash: Keeping block FD_O3DATA because it has no version specifier. Exception in thread Thread-4: Traceback (most recent call last) : File "C: \Users\T410\ AppData\ Local \Programs \Python\Python39-32\lib\threading.py" , line 980, in _bootstrap_inner self.run() File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\threading.py",line917,inrun self._target(*self._args, *self. _Kwargs) File "C: \Users\T410\Desktop\VW_Flash-master\VW_Flash-master\lib\dq381_flash_utils.py",line234,inflash_bin prepared _blocks = prepare_blocks( File "C: \Users\T410\Desktop\VW_Flash-master\VW_Flash-master\lib\dq381_flash_utils.py",line102,inprepare_blo compressed_binary=lzss.lzss_compress(binary_data) File "C: \Users\T410 \Desktop\VW_Flash-master \VW_Flash-master\lib\lzss_helper.py",line 22, in lzss_compress p = subprocess.run( File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\subprocess.py",line505,inrun with Popen(popenargs, **kwargs) as process: File "C: \Users\T410\AppData\Local \Programs \Python \Python39-32\lib\subprocess.py" , line 951, in init self. •_execute_child(args, executable, preexec_fn, close_fds, File "C: \Users\T410\AppData\Local\Programs\Python\Python39-32\lib\subprocess.py" , line 1420, in _execute child hp, ht, pid, tid = winapi.CreateProcess(executable,args, FileNotFoundError: [WinError 2] Das System kann die angegebene Datei nicht finden

— Reply to this email directly, view it on GitHub https://github.com/bri3d/VW_Flash/issues/35#issuecomment-1153014912, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABTO2PONLEJSS7ZUT56RV3VOULS7ANCNFSM5NUQYVPQ . You are receiving this because you commented.Message ID: @.***>

bri3d commented 2 years ago

I see now. If you are building from source on Windows, you need to either compile lzss.exe or copy it from a release build.

Anyway, I made a prerelease with DQ381 so you do not need to do this: https://github.com/bri3d/VW_Flash/releases/download/v0.3.0/release.zip

bri3d commented 2 years ago

As an update:

I do not need additional testing for now. I did an initial round of testing and discovered that DQ381 requires a very specific modification to LZSS compression, where the compressed data is made to decompress to a precise length. This is actually not a particularly easy thing to do due to the way LZSS works, so I am working on finishing up my implementation of this exact length compression today.

I will push a new prerelease version 0.3.2 or higher once I have solved this LZSS problem.

Progress is being made!

MaddinMK7R commented 2 years ago

has anyone tested the beta 0.3.4 with a tuning dsg file? Is the tuning file flashed with the function Flash Stock or Full Flash Unlocked ?

bri3d commented 2 years ago

It doesn't work yet.

I fixed the LZSS issue, so that part is solved. Now you can use Flash Calibration to flash Block 3 (calibration) if you have a matching ASW already, but Full Flash Unlocked does not work because of an ISO-TP Continue message / timing issue with sending the Erase command for Block 2.

This is very hard to bypass for Tactrix cables (I think this is why commercial tools do not support this module on Tactrix, I now understand...) and for the A0, I have been working on patches to the firmware but we haven't had success yet.

Progress is slow since I rely on others to test.

sagishm commented 2 years ago

It doesn't work yet.

I fixed the LZSS issue, so that part is solved. Now you can use Flash Calibration to flash Block 3 (calibration) if you have a matching ASW already, but Full Flash Unlocked does not work because of an ISO-TP Continue message / timing issue with sending the Erase command for Block 2.

This is very hard to bypass for Tactrix cables (I think this is why commercial tools do not support this module on Tactrix, I now understand...) and for the A0, I have been working on patches to the firmware but we haven't had success yet.

Progress is slow since I rely on others to test.

Pcmflash have protocol for obd with Tactrix…

bri3d commented 2 years ago

Interesting, certainly it is possible but it would require re-implementing ISO-TP in software instead of using the ISO15765 connection in J2534, if what I think is correct about the ISO-TP issue. Anyway, I am trying firmware updates and waiting on testing for full support, but calibration flashing is working now.

MaddinMK7R commented 2 years ago

It would be great if the exact parameter set designation-data set name (example: FL_0GC300012A_1626_OcWY.par) were also read out with the TCU identifier, then you would have the exact designation of the required file and you save additional reading with another tool.

KRACER666 commented 1 year ago

Is it possible to write to DQ381/DQ380 now? Will it cause the gearbox to brick?

bri3d / VW_Flash

DSG DQ381 #35