A python library with accompanying Arduino code to drive a vertical plotter from a Raspberry Pi. This project is targeted to drive the driver board created by makeBournemouth, but will work with any system capable of running Python and connecting to an Arduino/Genuino to drive the stepper motors
When I run vPiP (python test1.py) on a vPiP board v1.0b, the program sits at Polargraph exit until I reset the Arduino Pro Mini at which point the servo does its down-up-down move and then the steppers work...
I opened this against the vPiP board, but have done some debugging on the Arduino firmware and I think the issue is on the vPiP software side, so creating new issue here.
When I run vPiP (python test1.py) on a vPiP board v1.0b, the program sits at Polargraph exit until I reset the Arduino Pro Mini at which point the servo does its down-up-down move and then the steppers work...
I opened this against the vPiP board, but have done some debugging on the Arduino firmware and I think the issue is on the vPiP software side, so creating new issue here.
https://github.com/MarkJB/pi-2-stepper-board/issues/6