search

brockstar420 / wiiflow

Automatically exported from code.google.com/p/wiiflow
0 stars 0 forks source link

lets paint #383

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 

Please provide any additional information below.
I am trying to get Let's Paint NTSC to work on my PAL 3.4E     using  r228 and 
r254 all versions

If I use force NTSC or system default video modes I can play in red but in any 
other mode I get the following message
define LOCALIZATION_EU
or set NDEV to US mode
Any suggestions or ideas would be most welcome.

Original issue reported on code.google.com by spfletc...@live.co.uk on 13 Oct 2010 at 8:30

GoogleCodeExporter commented 8 years ago 
Sounds like a language patch is needed.

Original comment by r-...@live.com on 13 Oct 2010 at 8:38

GoogleCodeExporter commented 8 years ago 
@spfletcher: Did you try a language patch? Also, does your TV support NTSC 
video modes?

Anyway, I'm marking this issue invalid, since it's not a wiiflow issue.

Original comment by r-...@live.com on 16 Oct 2010 at 7:22

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
If r-win marked it invalid, that means its confirmed working most likely and 
proves its ebkac.

Original comment by Miigotu on 16 Oct 2010 at 11:23

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
We will try this soon.

Original comment by r-...@live.com on 17 Oct 2010 at 6:45

GoogleCodeExporter commented 8 years ago 
Played the ntsc version on a pal wiisystem without any problems
just set videomodus on ntsc
all colors are there, kids love it :)

Original comment by d...@onsmail.nl on 17 Oct 2010 at 6:54

GoogleCodeExporter commented 8 years ago 
That means that it is indeed not a wiiflow error, and that the issue is 
invalid. I'm still wondering whether your TV has full NTSC support.

Original comment by r-...@live.com on 17 Oct 2010 at 7:07

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Did you try another loader? If, let's say, cfg loader usb is capable of 
launching this correctly, we might consider the bug report again.

Original comment by r-...@live.com on 17 Oct 2010 at 9:08

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
I can confirm the NTSC version working on my pal wii, with default game 
settings.
I use IOS 249, cIOSx rev19, base 38...

Original comment by e.van.de...@gmail.com on 18 Oct 2010 at 8:52

GoogleCodeExporter commented 8 years ago 
Not sure but I only have this problem when I use a RGB cable, I believe its 
somthing to do with NTSC wii's not outputting RGB. And PAL wii's wont output 
Svideo. Get a component cable and the problem goes away.

Original comment by dickielightbar@gmail.com on 22 Nov 2010 at 10:04

GoogleCodeExporter commented 8 years ago 
uhhh... isn't component rgb?

Original comment by svi...@gmail.com on 22 Nov 2010 at 8:45

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Nope RGB is RGB (via scart socket), component is (Y, pb/cb, pr/cr) as found on 
the back of hidef TV's in the form of three phono rca connectors coloured 
green, blue and red respectivly.

However a few games still need to force the video mode to Pal50 to get a 
picture, but video output compatability and quality is vastly inproved with a 
component cable as 480p is supported on most games.

Original comment by dickielightbar@gmail.com on 30 Nov 2010 at 7:13