Open GoogleCodeExporter opened 9 years ago
这个还没有经过验证。
Original comment by woshiyuh...@gmail.com
on 23 Jun 2011 at 1:57
Great job! But the compatibility of code is important too. So please use
LINUX_VERSION_CODE and KERNEL_VERSION macro to support different kernel
versions.
Example:
#ifndef KERNEL_VERSION
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
#endif
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,37)
temp=&(in_dev6->addr_list);
#else
ifa6 = in_dev6->addr_list;
#endif
Original comment by Mzwei...@gmail.com
on 23 Jun 2011 at 1:08
我用上面的patch编译了napt66,使用的是trunk版openwrt,内核版本
2.6.39,按这里给的教程制作了一个napt66固件,在路由器上napt66�
��块也能运行,lsmod可以看到,但就是下面的PC连不上ipv6网络�
��刚开始ping
ipv6地址连不上端口,我把路由防火墙设置成全部允许,但还�
��上不了,ping超时。不知道是不是哪一步做错了,有时间再��
�试吧。
Original comment by tsl0...@gmail.com
on 27 Jun 2011 at 6:14
把你的模块发给我吧。 woshiyuhao0819@gmail.com
Original comment by woshiyuh...@gmail.com
on 27 Jun 2011 at 10:47
我把模块和固件都上传到这里吧。
OpenWrt源码使用的trunk版,linux内核版本2.6.39.1
固件里只编译了使用isatap隧道方式接入ipv6所需要的包,其它�
��式的自行编译吧。
里面的配置是我在自己学校使用的,自己看情况修改。
我现在还没测试成功,路由器里能ipv6,下面PC还是不行。这��
�天考试较多,就留给你们去测试吧,成功了告诉我一声。
Original comment by tsl0...@gmail.com
on 28 Jun 2011 at 1:46
Attachments:
低版本的内核没有sock_net怎么办?2.6.22.19想编译进tomato固件里
Original comment by q741...@gmail.com
on 15 Sep 2011 at 5:41
Original issue reported on code.google.com by
woshiyuh...@gmail.com
on 22 Jun 2011 at 6:08