Temp going up when cooling (have changed to Celsius)

bruhautomation / ESP-MQTT-JSON-Multisensor

(OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too!

https://youtu.be/jpjfVc-9IrQ

Apache License 2.0

340 stars 152 forks source link

Temp going up when cooling (have changed to Celsius) #31

Closed pornstrup closed 6 years ago

pornstrup commented 6 years ago

Thanks for a great multisensor-node.

I have a problem with the temp-sensor. When blowing cool air to the sensor it gives higher values (ex. going from 25 Celsius to 35 Celsius). I have tried to switch the 3v and G wires without effect. Im using the DHT22 temp-sensor you have a link to in readme. I have no clue whats wrong.

bachoo786 commented 6 years ago

I am having the same issues as you. Not getting the correct temperature readings shows warm temperature by 5 to 8 degrees than the current temperature. Any ideas on how to resolve this issue?