search

bruhautomation / ESP-MQTT-JSON-Multisensor

(OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too!
https://youtu.be/jpjfVc-9IrQ
Apache License 2.0
340 stars 152 forks source link

Random 0values on HA logging #41

Open lassivv opened 6 years ago

lassivv commented 6 years ago

Build sensor and leave led hardware out. Sensors readings are perfect and seems very accurate.

But randomly couple times of days, every sensor take 0value (temp, humidity, brighness)

Here example picture: https://i.imgur.com/dSYydNj.png

Try couple different 1.5-2A (5v) power supplyes, not help this situation.

lassivv commented 6 years ago

Anyone have same type problems or do i only have them :)

Now i have couple sensor. Other is this wiring method what this page shows. Other is totally planned circuit board.

Wiring method here still keep giving that 0values 3-6times per day.

My circuit board model gives only one that kind 0values on day. Circuit board model is longer distance to wlan router than original model. Bad wlan signal is not that problem then.

....

One solution maybe if you can take of that 0values when bruh multisensor arduino soft boot. I think sensor do boot and because that i get that 0values. (because if i watching serial monitor on sensor everytime when i boot that that gives couple times 0values before that gives right values.

Hope someone have same problems and can give some tips.

VegasIOT commented 6 years ago

This looks like the same issue as https://github.com/bruhautomation/ESP-MQTT-JSON-Multisensor/issues/36

lassivv commented 6 years ago

Confirm that, just some reason not see that issue, when i do my issue number.