search

bruhautomation / ESP-MQTT-JSON-Multisensor

(OBSOLETE) ESP MQTT JSON Multisensor for Home Assistant. Supported sensors include the TEMT6000 light, AM312 PIR, DHT22 temperature/humidity sensors. RGB led supports flash, fade, and transition. Over-The-Air (OTA) uploading, too!
https://youtu.be/jpjfVc-9IrQ
Apache License 2.0
340 stars 152 forks source link

wdt timeout #52

Open jhavens12 opened 6 years ago

jhavens12 commented 6 years ago

Is anyone else seeing the WDT timeout issues? For me, the sensor will work for a few days without issue and then it will drop offline. If you look at the console, it will show "wdt timeout ()" and freeze up until its physically unplugged and replugged in. Getting this with a few ESP8266 boards. Anyone have any ideas?

mattlward commented 6 years ago

I do not.. I have 3 sensing Wemos D1 mini's running espeasy and passing 2 values back to mqtt on a very regular basis. A couple of them also have switches and they always respond. I am running the Mosquito broker on Hassio.

mr-sneezy commented 6 years ago

Do you have to have console running before the WDT, or is it readable after ? Might check mine for this...

jhavens12 commented 6 years ago

Yes I've seen the WDT timeout when connected to the console, there is nothing after the wdt timeout line, just blank until the board is unplugged/replugged

SealedJoy commented 6 years ago

Same problem here with wemos d1 mini