Standalone installation instructions

[enderger]

Currently, there is no information on separating the language server from the VSCode extension. For users of other editors, it might be good to provide instructions for installing the server outside of VSCode to be used in something like Neovim.

[Simerax]

> git clone https://github.com/bscan/RakuNavigator
> cd RakuNavigator
> npm install
> npm run compile

Now you should be able to run the server for neovim with node server/out/server.js --stdio

Ps. im trying to solve the same problem as you (using it in neovim) i don't know if this is the "recommended" way to get it up and running but so far it looks promising.

[bscan]

Hi @Simerax and @enderger . Yes, that's the recommended method for getting it running. The https://github.com/bscan/PerlNavigator docs have more information about this type of configuration, as the Perl and Raku Navigators both share the same architecture. For the Perl version, it also can be downloaded from NPM, which is something I'd like to add here.

Pull requests would also be more than welcome. The settings will likely vary per editor, so crowdsourcing this would be helpful.

[rcmlz]

Jupyter Lab

I followed the instructions on the PerlNavigator site to install RakuNavigator into /Users/me/.raku/RakuNavigator and configured it for Sublime. That worked fine.

To use RakuNavigator with JupyterLab I created a file raku-language-server-implementation.json

{
  "LanguageServerManager": {
    "language_servers": {
      "raku-language-server": {
        "version": 2,
        "argv": ["node", "/Users/me/.raku/RakuNavigator/server/out/server.js", "--stdio"],
        "languages": ["raku"],
        "mime_types": ["text/raku", "text/x-raku"],
        "display_name": "Raku Language Server"
      }
    }
  }
}

in the directory /Users/me/.virtualenvs/PROJECT/etc/jupyter/jupyter_server_config.d/ following the example here. Use a different path from jupyter --paths if needed.

After tweaking the Raku-Kernel to use "mimetype": "text/x-raku", instead of "mimetype": "text/plain" for new Notebooks (basically search/replace) it worked. Will do a PR, maybe the change gets included.

[7stud]

@bscan,

I couldn't get the Raku language server to work with emacs 29.1. I did these steps:

git clone https://github.com/bscan/RakuNavigator.git
cd RakuNavigator
npm install
npm run compile

Then I went to the PerlNavigator repo, where there are instructions for emacs and eglot, and I converted the following PerlNavigator configuration:

(setq-default eglot-workspace-configuration
                '((:perlnavigator . (:perlPath
                              "/path/to/perl"
                              :enableWarnings t))))

(with-eval-after-load 'eglot
  (add-to-list 'eglot-server-programs
               `((cperl-mode perl-mode) . ("/path/to/perlnavigator", "--stdio"))))

(global-company-mode)

(add-hook 'cperl-mode-hook 'eglot-ensure)
(add-hook 'perl-mode-hook 'eglot-ensure)

to this RakuNavigator configuration:

(setq-default eglot-workspace-configuration
    '((:rakunavigator . (:rakuPath
                         "/usr/local/bin/rakudo-moar-2024.01-01-macos-arm64-clang/bin/raku"
                          :enableWarnings t))))

(with-eval-after-load 'eglot
  (add-to-list 'eglot-server-programs
      `((raku-mode) . ("/Users/7stud/RakuNavigator/server/out/server.js", "--stdio"))))

(global-company-mode)

;;(add-hook 'cperl-mode-hook 'eglot-ensure)
(add-hook 'raku-mode-hook 'eglot-ensure)

I added the RakuNavigator configuration to my .emacs file. Then I did:

~$ cd ./RakuNavigator/server/out
RakuNavigator/server/out$ chmod a+x server.js

to make server.js executable.

Then I installed the company package. In emacs:

M-x list-packages
C-s company (then C-s repeatedly until I found the company package).
I typed an i with the cursor on the company line.
I typed an x, which installed the company package.

Then I restarted emacs, and I opened the file b.raku and the mode line specified (Raku company), then I did:

M-x eglot <Ret>

but I got the error:

Doing vfork: Exec format error

Here's the full output:

Loading /opt/local/share/emacs/site-lisp/subdirs.el (source)...done  
Loading /Users/7stud/.emacs.d/custom.el (source)...done  
For information about GNU Emacs and the GNU system, type C-h C-a.  
b.raku has auto save data; consider M-x recover-this-file  
Error in post-command-hook (#\[0 "\\303\\301!\\205�r\\301q\\210\\304\\305\\300\\242\\306#\\210  
?\\205�\\307\\310\\311 \\")\\207" \[(#0) #<buffer b.raku> eglot--managed-mode buffer-live-p remove-hook post-command-hook t apply eglot--connect eglot--guess-contact\] 4\]): (file-error "Doing vfork" "Exec format error")  
Doing vfork: Exec format error

In the buffer containing my raku file, I don't get any language hints when I put the cursor on a function or anything else that would make me think the language server is working.

C-h v eglot-server-programs yields:

...
...

Value:
(((raku-mode)
  "/Users/7stud/RakuNavigator/server/out/server.js" "--stdio")
 ((rust-ts-mode rust-mode)
  . #f(compiled-function
       (&optional interactive)
       #<bytecode -0x150b7818629c4e00>))
 ((cmake-mode cmake-ts-mode)
  "cmake-language-server")

...
...

Here's some debug output:

Debugger entered--Lisp error: (file-error "Doing vfork" "Exec format error")
  make-process(:name "EGLOT (raku_programs/(raku-mode))" :command ("/Users/7stud/RakuNavigator/server/out/server.js" "--stdio") :connection-type pipe :coding utf-8-emacs-unix :noquery t :stderr #<buffer *EGLOT (raku_programs/(raku-mode)) stderr*> :file-handler t)
  #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)()
  #f(compiled-function (cl--cnm conn slots) #<bytecode 0xafdb99b87c0c1e2>)(#f(compiled-function (&rest args) #<bytecode -0x7451545b80f0461>) #<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  apply(#f(compiled-function (cl--cnm conn slots) #<bytecode 0xafdb99b87c0c1e2>) #f(compiled-function (&rest args) #<bytecode -0x7451545b80f0461>) (#<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>))))
  #f(compiled-function (conn slots) #<bytecode 0x1a118c40b71591b9>)(#<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  apply(#f(compiled-function (conn slots) #<bytecode 0x1a118c40b71591b9>) (#<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>))))
  #f(compiled-function (&rest args) #<bytecode -0x1621c4701db12a08>)(#<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  apply(#f(compiled-function (&rest args) #<bytecode -0x1621c4701db12a08>) #<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  initialize-instance(#<eglot-lsp-server eglot-lsp-server-42f46ca8> (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  #f(compiled-function (class &rest slots) "Default constructor for CLASS `eieio-default-superclass'.\nSLOTS are the initialization slots used by `initialize-instance'.\nThis static method is called when an object is constructed.\nIt allocates the vector used to represent an EIEIO object, and then\ncalls `initialize-instance' on that object." #<bytecode 0x1345cf428cfc9403>)(eglot-lsp-server :name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>))
  apply(#f(compiled-function (class &rest slots) "Default constructor for CLASS `eieio-default-superclass'.\nSLOTS are the initialization slots used by `initialize-instance'.\nThis static method is called when an object is constructed.\nIt allocates the vector used to represent an EIEIO object, and then\ncalls `initialize-instance' on that object." #<bytecode 0x1345cf428cfc9403>) eglot-lsp-server (:name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  make-instance(eglot-lsp-server :name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown :process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>))
  apply(make-instance eglot-lsp-server :name "EGLOT (raku_programs/(raku-mode))" :events-buffer-scrollback-size 2000000 :notification-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccb16b9f61>) :request-dispatcher #f(compiled-function (server method params) #<bytecode -0xa314bccc4eb9f61>) :on-shutdown eglot--on-shutdown (:process #f(compiled-function () #<bytecode 0x9056aa22b2ee02b>)))
  eglot--connect((raku-mode) (transient . "/Users/7stud/raku_programs/") eglot-lsp-server ("/Users/7stud/RakuNavigator/server/out/server.js" "--stdio") "raku")
  eglot((raku-mode) (transient . "/Users/7stud/raku_programs/") eglot-lsp-server ("/Users/7stud/RakuNavigator/server/out/server.js" "--stdio") "raku" t)
  funcall-interactively(eglot (raku-mode) (transient . "/Users/7stud/raku_programs/") eglot-lsp-server ("/Users/7stud/RakuNavigator/server/out/server.js" "--stdio") "raku" t)
  command-execute(eglot record)
  execute-extended-command(nil "eglot" "eglot")
  funcall-interactively(execute-extended-command nil "eglot" "eglot")
  command-execute(execute-extended-command)

[bscan]

Hi @7stud, I believe the issue is that server.js is not an executable. For perlnavigator, I provide an executable that is installed in /usr/local/bin automatically when you npm install perlnavigator-server (see here: https://github.com/bscan/PerlNavigator/blob/main/server/bin/perlnavigator )

For the Raku version, I have not yet uploaded this to npm or added the executable. In the meantime, you can preface the command with "node" and it should work. See the comment from @rcmlz as well where they used this as a command:

"argv": ["node", "/Users/me/.raku/RakuNavigator/server/out/server.js", "--stdio"],

[luolong]

There's lots of good information here, but could I sugest adding installation instructions to README documentation per editor?