Association matrix has some incorrect associations

[GoogleCodeExporter]

http://spatial.ala.org.au/files/inter_layer_association.csv

'Radiation - mean annual precipitation modified (terrestrial)' is being 
compared with marine layers when it should NOT be.

'Bathymetry and Topography 9 sec' (terrestrial and marine) isn't being compared 
with terrestrial when it should be, but IS being compared with topographic 
slope % (terrestrial)

Topographic slope % (terrestrial) is being compared with all terrestrial and 
marine layers when it should be only compared with terrestrial

Topographic slope degrees (terrestrial and marine) isn't being compared with 
marine layers when it should be.

It looks like the terrestrial/marine parameters for Topographic slope % 
(terrestrial)and degree (terrestrial and marine) layers have been swapped.

I checked the Dev and Prod Layers Table and all terrestrial/marine settings 
were correct except for 'Bathymetry and topography 9 sec' - and I corrected 
this. It was set 'Marine' when it should have been 'Terrestrial, Marine'.

Set 'Critical' as the problem means the association matrix is incomplete and 
while few users will find this matrix and use it in subsequent analyses, I'm 
assuming that the colour coding used when selecting layers will be incorrect 
for the layers above and all relevant layer pairs.

Original issue reported on code.google.com by leebel...@gmail.com on 23 Dec 2013 at 10:51

[GoogleCodeExporter]

Assigning to me for now. We need to work out priorities across the board. 
Downgrading as well.

Original comment by moyesyside on 13 Jan 2014 at 12:48

• Added labels: Priority-High
• Removed labels: Priority-Critical

[GoogleCodeExporter]

I raised this with Adam and he said that the routine only expects to add 
missing layer values. This explains why incorrect associations (e.g., between 
terrestrial and marine layers) remain. What needs to happen is either

1. Delete the CONTENT of the existing matrix or
2. Delete the offending rows and columns of the existing matrix

and re-run the procedure. If (1), then it will take a few hours.

Original comment by leebel...@gmail.com on 28 Jan 2014 at 12:27

[GoogleCodeExporter]

New interlayer association matrix is available.  Still need to replace the 
static pdf and csv versions that live in various places on prod.

Original comment by adam.col...@gmail.com on 20 Mar 2014 at 11:50

• Changed state: Started

[GoogleCodeExporter]

The LSM looks good so far.

Original comment by leebel...@gmail.com on 21 Mar 2014 at 12:19

[GoogleCodeExporter]

Corrected and on Prod.

Original comment by adam.col...@gmail.com on 1 May 2014 at 12:39

• Changed state: Done