Closed GoogleCodeExporter closed 9 years ago
Just got the same failure on national extent layers. The same run worked a few
hours ago. Geoserver, space??
Original comment by leebel...@gmail.com
on 26 Feb 2014 at 1:56
This worked for me.
This tool has always been very very flakey and I presume the bottleneck is the
generation of the layer in geoserver. The controls for selecting layers are
also very (Lee im guessing you know how to work around it).
This would be a candidate for a re-write as I recognise the importance of the
tool.
At this stage I would recommend demo-ing with the caveat that it is alpha at
best.
Original comment by moyesyside
on 26 Feb 2014 at 6:37
Original comment by moyesyside
on 26 Feb 2014 at 6:39
Attachments:
After reviewing all issues, we need at least a temporary fix for this important
function for world extent layers such as worldclim. E.g., this function enables
rapid modeling of invasive species in Australia given home range parameters.
I can't agree with WontFix given the significance and urgency (due to it being
the SUBJECT of a national presentation at Locate14 - spatial@gov). See attached
accepted abstract. I cannot write the presentation without a solution and the
audience will not be impressed if they try to replicate what I have tried to do.
Original comment by leebel...@gmail.com
on 2 Mar 2014 at 10:32
Attachments:
Struggling to reproduce this. Adam has suggested removing the WKT generation
but not sure for certain this is the problem as I cant reproduce.
Original comment by moyesyside
on 3 Mar 2014 at 1:29
Just did the same 404 for me after about 3 minutes. See attached - it has the
parameters on the 3 worldclim layers in the box.
Original comment by leebel...@gmail.com
on 3 Mar 2014 at 1:51
Attachments:
For the 404/speed problem, working with a reduced resolution appears to do the
trick. When input layers are only world coverage layers the output envelope is
scaled to 0.04 instead of the default 0.01. This is scaled dynamically based
on the extents of the input layers. Under 1min return in a dev test on 3 world
extent layers. Further testing is required.
Original comment by adam.col...@gmail.com
on 3 Mar 2014 at 8:35
Nice result! Certainly within the current 5 min timeout.
Original comment by moyesyside
on 3 Mar 2014 at 9:30
Original comment by moyesyside
on 3 Mar 2014 at 9:39
Checks out wonderfully on dev! ToProd?
Original comment by leebel...@gmail.com
on 3 Mar 2014 at 9:37
Attachments:
patched on prod
Original comment by adam.col...@gmail.com
on 10 Mar 2014 at 8:39
Original issue reported on code.google.com by
leebel...@gmail.com
on 26 Feb 2014 at 1:27Attachments: