The controller estops if you click "Pause" during a probing command (e.g. G38.2 Z-50).
This problem was not introduced with 1.0.0 software. It also happens on 0.4.15. It also happens when controlling from the local monitor and from a networked interface.
Once this happens, you can usually clear the estop by clicking the soft estop button.
The estop clears all position information, so if it happens in the middle of a cut, the part is likely to be ruined.
The controller estops if you click "Pause" during a probing command (e.g. G38.2 Z-50).
This problem was not introduced with 1.0.0 software. It also happens on 0.4.15. It also happens when controlling from the local monitor and from a networked interface.
Once this happens, you can usually clear the estop by clicking the soft estop button.
The estop clears all position information, so if it happens in the middle of a cut, the part is likely to be ruined.