Closed DougCoffland closed 8 months ago
Also update the following labels on the following pins to reflect changes made in V2 software and the V17 boards.
When these corrections are done, I need to update the manual with the images on the Settings->Control->I/O tab with the new screenshots.
Is this what it should look like?
+---------------+ en - 9 | | 8 - 0-10v dir 0 - 10 | | 7 - 5v dir 1 - 11 | | 6 - 5v dir 2 - 12 | | 5 - step 3 dir 3 - 13 | | 4 - step 2 gnd - 14 | | 3 - step 1 gnd - 15 | | 2 - step 0 gnd - 16 | | 1 - n/c +---------------+
Pin 16 is a no-connect. Here's how it should look.
[image: image.png]
On Tue, Oct 31, 2023 at 7:07 AM Joseph Coffland @.***> wrote:
Is this what it should look like?
+---------------+
en - 9 | | 8 - 0-10v dir 0 - 10 | | 7 - 5v dir 1 - 11 | | 6 - 5v dir 2 - 12 | | 5 - step 3 dir 3 - 13 | | 4 - step 2 gnd - 14 | | 3 - step 1 gnd - 15 | | 2 - step 0 gnd - 16 | | 1 - n/c +---------------+
— Reply to this email directly, view it on GitHub https://github.com/buildbotics/bbctrl-firmware/issues/340#issuecomment-1787291711, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACBFKW5ZUZIQJ6MOWKSKPBTYCEAZVAVCNFSM6AAAAAASO456OWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGI4TCNZRGE . You are receiving this because you modified the open/close state.Message ID: @.***>
The following pins shown for the DB15 breakout box on the Control page I/O Pins tab are wrong: