search

buildbotics / bbctrl-posts

CAM Post Processors for the Buildbotics CNC Controller
11 stars 7 forks source link

FreeCAD Post Processor support #2

Open nicodemus26 opened 4 years ago

nicodemus26 commented 4 years ago

Is a post-processor required for gcode generated by FreeCAD?

As an example, here is a GRBL post-processor: https://github.com/fra589/grbl_post

nicodemus26 commented 4 years ago

I'm not familiar with the gcode implementation differences, but if its useful here's a GRBL post for FreeCAD: https://github.com/fra589/grbl_post