search

buixuanan / fritzing

Automatically exported from code.google.com/p/fritzing
0 stars 0 forks source link

all grounds are not being treated as if they were on the same bus #1824

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
drop a usb connector and an arduino and mouse down on any ground connector.  
The ground connectors on the other part do not light up.

Original issue reported on code.google.com by irasc...@gmail.com on 3 Feb 2012 at 10:57

GoogleCodeExporter commented 9 years ago 
Issue 1822 has been merged into this issue.

Original comment by irasc...@gmail.com on 3 Feb 2012 at 1:18

GoogleCodeExporter commented 9 years ago

Original comment by irasc...@gmail.com on 4 Feb 2012 at 8:05

GoogleCodeExporter commented 9 years ago

Original comment by irasc...@gmail.com on 5 Feb 2012 at 2:24

GoogleCodeExporter commented 9 years ago 
this is correct--they should not automatically be on the same bus.  which means 
that ground fill should also keep these separate

Original comment by irasc...@gmail.com on 6 Feb 2012 at 9:19

GoogleCodeExporter commented 9 years ago 
list of parts using "gnd", "ground", "-", or "vss":

\parts/contrib/SN74LS14N Schmitt Trigger.fzp:        <connector id="connector6" 
type="male" name="GND">
\parts/contrib/TPA2000D1 Audio Amplifier dip double.fzp:        <connector 
id="connector7" type="male" name="GND">
\parts/contrib/TPA2000D1 Audio Amplifier dip.fzp:        <connector 
id="connector7" type="male" name="GND">
\parts/contrib/TPA2000D1 Audio Amplifier smd.fzp:        <connector 
id="connector7" type="pad" name="GND">
\parts/core/74HC595.fzp:        <connector id="connector7" name="GND" 
type="male">
\parts/core/AD5206 Digital Potentiometer.fzp:        <connector id="connector3" 
name="Gnd" type="male">
\parts/core/Adafruit_Atmega32u4_Breakout.fzp:        <connector 
id="connector36" type="male" name="GND">
\parts/core/Adafruit_Atmega32u4_Breakout.fzp:        <connector 
id="connector14" type="male" name="GND">
\parts/core/Arduino Ethernet Shield.fzp:        <connector id="connector19" 
name="GND" type="female">
\parts/core/Arduino Ethernet Shield.fzp:        <connector id="connector20" 
name="GND" type="female">
\parts/core/Arduino Ethernet Shield.fzp:        <connector id="connector1" 
name="GND" type="female">
\parts/core/Arduino Fio.fzp:        <connector id="connector15" name="GND" 
type="male">
\parts/core/Arduino Fio.fzp:        <connector id="connector13" name="GND" 
type="male">
\parts/core/Arduino LilyPad.fzp:        <connector id="connector1" name="GND" 
type="female">
\parts/core/Arduino Mini.fzp:        <connector id="connector22" name="GND" 
type="male">
\parts/core/Arduino Mini.fzp:        <connector id="connector1" name="GND" 
type="female">
\parts/core/Arduino Mini.fzp:        <connector id="connector12" name="GND" 
type="male">
\parts/core/Arduino Mini.fzp:        <connector id="connector14" name="GND" 
type="female">
\parts/core/Arduino Mini.fzp:       <bus id="GND">
\parts/core/Arduino Nano.fzp:        <connector id="connector29" name="GND" 
type="male">
\parts/core/Arduino Nano.fzp:        <connector id="connector4" name="GND" 
type="male">
\parts/core/arduino.fzp:        <connector id="connector19" name="GND" 
type="female">
\parts/core/arduino.fzp:        <connector id="connector20" name="GND" 
type="female">
\parts/core/arduino.fzp:        <connector id="connector1" name="GND" 
type="female">
\parts/core/arduino_mega.fzp:        <connector id="connector1" name="GND" 
type="female">
\parts/core/arduino_mega.fzp:        <connector id="connector19" name="GND" 
type="female">
\parts/core/arduino_mega.fzp:        <connector id="connector20" name="GND" 
type="female">
\parts/core/arduino_mega.fzp:        <connector id="connector68" name="GND" 
type="female">
\parts/core/arduino_mega.fzp:        <connector id="connector69" name="GND" 
type="female">
\parts/core/Arduino_UNO_R3.fzp:        <connector id="connector19" name="GND" 
type="female">
\parts/core/Arduino_UNO_R3.fzp:        <connector id="connector20" name="GND" 
type="female">
\parts/core/Arduino_UNO_R3.fzp:        <connector id="connector1" name="GND" 
type="female">
\parts/core/ATmega644.fzp:        <connector id="connector30" type="male" 
name="GND">
\parts/core/ATmega644.fzp:        <connector id="connector10" type="male" 
name="GND">
\parts/core/Barometric Pressure Sensor.fzp:        <connector id="connector6" 
name="GND" type="male">
\parts/core/controller_mbed.fzp:        <connector id="connector0" name="GND" 
type="male">
\parts/core/controller_pico.fzp:        <connector id="connector108" name="Gnd" 
type="male">
\parts/core/controller_wiring.fzp:        <connector id="connector25" 
name="GND" type="female">
\parts/core/controller_wiring.fzp:        <connector id="connector26" 
name="GND" type="female">
\parts/core/controller_wiring.fzp:        <connector id="connector61" 
name="GND" type="female">
\parts/core/controller_wiring.fzp:        <connector id="connector63" 
name="GND" type="female">
\parts/core/controller_wiring.fzp:        <connector id="connector65" 
name="GND" type="female">
\parts/core/controller_wiring_mini.fzp:        <connector id="connector26" 
name="GND" type="male">
\parts/core/controller_wiring_mini.fzp:        <connector id="connector27" 
name="GND" type="male">
\parts/core/din-5_midi_connector.fzp:        <connector id="connector6" 
name="GND" type="male">
\parts/core/din-5_midi_connector.fzp:        <connector id="connector7" 
name="GND" type="male">
\parts/core/din-5_midi_connector.fzp:        <connector id="connector8" 
name="GND" type="male">
\parts/core/din-5_midi_connector.fzp:        <connector id="connector9" 
name="GND" type="male">
\parts/core/EDGY_motor_control.fzp:          <connector id="connector8" name="GND" 
type="male">
\parts/core/EDGY_motor_control.fzp:          <connector id="connector13" name="GND" 
type="male">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector56" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector57" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector58" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector59" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector23" name="GND" 
type="male">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector24" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector28" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector33" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector47" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector48" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector49" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector11" name="GND" 
type="male">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector14" name="GND" 
type="male">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector50" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector55" name="GND" 
type="female">
\parts/core/gogoboard 4.0.fzp:        <connector id="connector2" name="GND" 
type="male">
\parts/core/gogoboard 4.0.fzp:      <bus id="GND">
\parts/core/infrared_proximity_sensor.fzp:        <connector id="connector1" 
name="GND" type="male">
\parts/core/KA78R05_Low_Dropout_Voltage_Regulator.fzp:        <connector 
id="connector2" type="male" name="GND">
\parts/core/led-rgb-6pin.fzp:        <connector id="connector1" name="GND" 
type="male">
\parts/core/led-rgb-6pin.fzp:        <connector id="connector4" name="GND" 
type="male">
\parts/core/lm34.fzp:  <connector id="connector2" name="GND" type="male">
\parts/core/lm35.fzp:  <connector id="connector2" name="GND" type="male">
\parts/core/Netduino.fzp:       <connector id="connector19" name="GND" type="female">
\parts/core/Netduino.fzp:       <connector id="connector20" name="GND" type="female">
\parts/core/Netduino.fzp:       <connector id="connector1" name="GND" type="female">
\parts/core/NetduinoMini.fzp:       <connector id="connector3" name="GND" 
type="male">
\parts/core/NetduinoMini.fzp:       <connector id="connector22" name="GND" 
type="male">
\parts/core/NetduinoPlus.fzp:       <connector id="connector19" name="GND" 
type="female">
\parts/core/NetduinoPlus.fzp:       <connector id="connector20" name="GND" 
type="female">
\parts/core/NetduinoPlus.fzp:       <connector id="connector1" name="GND" 
type="female">
\parts/core/Power plug.fzp:        <connector id="connector0" name="GND" 
type="male">
\parts/core/Power plug.fzp:        <connector id="connector2" name="GND" 
type="male">
\parts/core/Power plug.fzp:        <bus id="GND">
\parts/core/Real_Time_Clock_Module___DS1307_RTC_Breakout_Board.fzp:        
<connector id="connector6" type="male" name="GND">
\parts/core/resonator-3pin.fzp:        <connector id="connector1" name="GND" 
type="male">
\parts/core/rfid-reader.fzp:        <connector id="connector2" name="GND" 
type="male">
\parts/core/servo.fzp:  <connector id="connector0" name="gnd" type="male">
\parts/core/SMD_74HC595.fzp:        <connector id="connector7" name="GND" 
type="male">
\parts/core/SMD_AD5206.fzp:        <connector id="connector3" name="Gnd" 
type="male">
\parts/core/SMD_HTSSOP28.fzp:   <bus id="GND">
\parts/core/SMD_Vreg_7805.fzp:  <connector id="connector1" name="GND" 
type="male">
\parts/core/SN74LS14N.fzp:        <connector id="connector6" type="male" 
name="GND">
\parts/core/SN74LS20N.fzp:        <connector id="connector6" type="male" 
name="GND">
\parts/core/SN74LS21N.fzp:        <connector id="connector6" type="male" 
name="GND">
\parts/core/SN74LS32N.fzp:        <connector id="connector6" type="male" 
name="GND">
\parts/core/Teensy 2.0 ++.fzp:        <connector id="connector21" type="female" 
name="GND">
\parts/core/Teensy 2.0 ++.fzp:        <connector id="connector32" type="male" 
name="GND">
\parts/core/Teensy 2.0 ++.fzp:        <connector id="connector0" type="male" 
name="GND">
\parts/core/Teensy 2.0 ++.fzp:      <bus id="GND" >
\parts/core/Teensy 2.0.fzp:        <connector id="connector15" type="female" 
name="GND">
\parts/core/Teensy 2.0.fzp:        <connector id="connector0" type="male" 
name="GND">
\parts/core/Teensy 2.0.fzp:     <bus id="GND" >
\parts/core/thermalprinter.fzp:        <connector id="connector0" type="male" 
name="GND">
\parts/core/thermalprinter.fzp:        <connector id="connector2" type="male" 
name="GND">
\parts/core/tmp36.fzp:  <connector id="connector2" name="GND" type="male">
\parts/core/USB connector.fzp:        <connector id="connector3" name="GND" 
type="male">
\parts/core/usbadapter_wiring.fzp:        <connector id="connector9" name="GND" 
type="male">
\parts/core/usbadapter_wiring.fzp:        <connector id="connector10" 
name="GND" type="male">
\parts/core/voltage_regulator_7805.fzp:  <connector id="connector1" name="GND" 
type="male">
\parts/core/voltage_regulator_7833.fzp:  <connector id="connector1" name="GND" 
type="male">
\parts/core/Wiring_S.fzp:        <connector id="connector36" type="female" 
name="GND">
\parts/core/Wiring_S.fzp:        <connector id="connector37" type="female" 
name="GND">
\parts/core/WIZ820io.fzp:        <connector id="connector23" type="male" 
name="GND">
\parts/core/WIZ820io.fzp:        <connector id="connector0" type="male" 
name="GND">
\parts/core/WIZ820io.fzp:        <connector id="connector1" type="male" 
name="GND">
\parts/core/WIZ820io.fzp:    <bus id="gnd">
\parts/core/xbee.fzp:        <connector id="connector9" name="GND" type="male">
\parts/obsolete/accelerometer-adxl.fzp:        <connector id="connector4" 
name="GND" type="male">
\parts/obsolete/AD5206 Digital Potentiometer.fzp:        <connector 
id="connector3" name="Gnd" type="male">
\parts/obsolete/Arduino Mini Pro.fzp:        <connector id="connector16" 
name="GND" type="female">
\parts/obsolete/Arduino Mini Pro.fzp:        <connector id="connector24" 
name="GND" type="female">
\parts/obsolete/Arduino Mini Pro.fzp:        <connector id="connector13" 
name="GND" type="female">
\parts/obsolete/Arduino Mini Pro.fzp:       <bus id="GND">
\parts/obsolete/basic_servo.fzp:  <connector id="connector0" name="gnd" 
type="male">
\parts/obsolete/controller_arduino_diecimila.fzp:  <connector id="connector1" 
name="GND" type="female">
\parts/obsolete/controller_arduino_diecimila.fzp:  <connector id="connector19" 
name="GND" type="female">
\parts/obsolete/controller_arduino_diecimila.fzp:  <connector id="connector20" 
name="GND" type="female">
\parts/obsolete/led-rgb-6pin.fzp:        <connector id="connector1" name="GND" 
type="male">
\parts/obsolete/led-rgb-6pin.fzp:        <connector id="connector4" name="GND" 
type="male">
\parts/obsolete/resonator-3pin.fzp:        <connector id="connector1" 
name="GND" type="male">
\parts/obsolete/SMD_AD5206.fzp:        <connector id="connector3" name="Gnd" 
type="male">

\parts/contrib/Peppermill Power Board.fzp:        <connector id="connector4" 
type="male" name="Ground">
\parts/core/Arduino Fio.fzp:      <bus id="ground">
\parts/core/Arduino Nano.fzp:      <bus id="ground">
\parts/core/arduino.fzp:              <erc etype="ground" ignore="ifUnconnected">
\parts/core/arduino.fzp:            <erc etype="ground" ignore="ifUnconnected">
\parts/core/arduino.fzp:            <erc etype="ground" ignore="ifUnconnected">
\parts/core/arduino.fzp:    <bus id="ground">
\parts/core/arduino_mega.fzp:    <bus id="ground">
\parts/core/Arduino_UNO_R3.fzp:           <erc etype="ground" 
ignore="ifUnconnected">
\parts/core/Arduino_UNO_R3.fzp:            <erc etype="ground" 
ignore="ifUnconnected">
\parts/core/Arduino_UNO_R3.fzp:            <erc etype="ground" 
ignore="ifUnconnected">
\parts/core/Arduino_UNO_R3.fzp:    <bus id="ground">
\parts/core/atmega168.fzp:        <bus id="ground">
\parts/core/BASIC_Stamp_2.fzp:      <bus id="ground">
\parts/core/BASIC_Stamp_2e.fzp:     <bus id="ground">
\parts/core/BASIC_Stamp_2p24.fzp:       <bus id="ground">
\parts/core/BASIC_Stamp_2p40.fzp:       <bus id="ground">
\parts/core/BASIC_Stamp_2pe.fzp:        <bus id="ground">
\parts/core/BASIC_Stamp_2px24.fzp:      <bus id="ground">
\parts/core/BASIC_Stamp_2sx.fzp:        <bus id="ground">
\parts/core/battery-AA.fzp:         <erc etype="ground">
\parts/core/controller_propeller_D40.fzp:       <bus id="ground">
\parts/core/controller_wiring.fzp:    <bus id="ground">
\parts/core/controller_wiring_mini.fzp:    <bus id="ground">
\parts/core/din-5_midi_connector.fzp:           <bus id="ground">
\parts/core/EDGY_motor_control.fzp:     <bus id="ground">
\parts/core/L293D.fzp:        <bus id="ground">
\parts/core/NetduinoMini.fzp:       <bus id="ground">
\parts/core/PICAXE_28.fzp:        <bus id="ground">
\parts/core/PICAXE_28A.fzp:        <bus id="ground">
\parts/core/PICAXE_28X.fzp:        <bus id="ground">
\parts/core/PICAXE_28X1.fzp:        <bus id="ground">
\parts/core/PICAXE_28X2.fzp:        <bus id="ground">
\parts/core/PICAXE_28X2_3V.fzp:        <bus id="ground">
\parts/core/PICAXE_40X.fzp:        <bus id="ground">
\parts/core/PICAXE_40X1.fzp:        <bus id="ground">
\parts/core/PICAXE_40X2.fzp:        <bus id="ground">
\parts/core/PICAXE_40X2_3V.fzp:        <bus id="ground">
\parts/obsolete/artreeno.fzp:  <bus id="ground">
\parts/obsolete/battery-AA.fzp:         <erc etype="ground">
\parts/obsolete/controller_arduino_diecimila.fzp:  <bus id="ground">

\parts/core/4 x AAA Battery Mount.fzp:        <connector id="connector0" 
type="male" name="-">
\parts/core/Battery block 9V.fzp:        <connector id="connector0" name="-" 
type="male">
\parts/core/battery-AA.fzp:        <connector id="connector0" name="-" 
type="male">
\parts/core/capacitor_electrolytic_large.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/capacitor_electrolytic_medium.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/capacitor_electrolytic_small.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/capacitor_tantalum_100mil.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/core/capacitor_tantalum_200mil.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/core/SMD_elko_0405.fzp:  <connector id="connector0" name="-" type="male">
\parts/core/SMD_elko_0605.fzp:  <connector id="connector0" name="-" type="male">
\parts/core/SMD_elko_0807.fzp:  <connector id="connector0" name="-" type="male">
\parts/core/SMD_elko_1010.fzp:  <connector id="connector0" name="-" type="male">
\parts/core/SMD_tantalum_capacitor_A_3216.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/SMD_tantalum_capacitor_B_3528.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/SMD_tantalum_capacitor_C_6032.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/core/SMD_tantalum_capacitor_D_7343.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/Battery block 9V.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/obsolete/battery-AA.fzp:        <connector id="connector0" name="-" 
type="male">
\parts/obsolete/capacitor_tantalum_0_1uF.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/obsolete/capacitor_tantalum_100uF.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/obsolete/capacitor_tantalum_10uF.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/obsolete/capacitor_tantalum_1uF.fzp:        <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_1000uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_100uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_10uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_1uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_220uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_22uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_4700uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_470uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_47uF.fzp:  <connector id="connector0" 
name="-" type="male">
\parts/obsolete/electrolytic_capacitor_basic_10uF.fzp:  <connector 
id="connector0" name="-" type="male">

\parts/core/AD5206 Digital Potentiometer.fzp:        <connector id="connector8" 
name="Vss" type="male">
\parts/core/BASIC_Stamp_1.fzp:        <connector id="connector1" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2.fzp:        <connector id="connector22" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2e.fzp:        <connector id="connector22" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2e.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2p24.fzp:        <connector id="connector22" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2p24.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2p40.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2p40.fzp:        <connector id="connector38" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2pe.fzp:        <connector id="connector22" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2pe.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2px24.fzp:        <connector id="connector22" 
name="VSS" type="male">
\parts/core/BASIC_Stamp_2px24.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2sx.fzp:        <connector id="connector22" name="VSS" 
type="male">
\parts/core/BASIC_Stamp_2sx.fzp:        <connector id="connector3" name="VSS" 
type="male">
\parts/core/controller_propeller_D40.fzp:        <connector id="connector8" 
name="VSS" type="male">
\parts/core/controller_propeller_D40.fzp:        <connector id="connector28" 
name="VSS" type="male">
\parts/core/HEF4094.fzp:        <connector id="connector7" type="male" 
name="Vss">
\parts/core/lcd-GDM1602K.fzp:        <connector id="connector0" name="VSS" 
type="male">
\parts/core/SMD_AD5206.fzp:        <connector id="connector8" name="Vss" 
type="male">
\parts/obsolete/AD5206 Digital Potentiometer.fzp:        <connector 
id="connector8" name="Vss" type="male">
\parts/obsolete/lcd-screen.fzp:        <connector id="connector0" name="VSS" 
type="male">
\parts/obsolete/SMD_AD5206.fzp:        <connector id="connector8" name="Vss" 
type="male">

\resources\parts/core/dcpower.fzp:     <erc etype="ground">
\resources\parts/core/ground.fzp:   <erc etype="ground">
\resources\parts/core/dcpower.fzp:   <connector type="male" id="connector1" 
name="GND" >
\resources\parts/core/ground.fzp:  <connector type="male" id="connector0" 
name="GND" >

Original comment by irasc...@gmail.com on 6 Feb 2012 at 9:34

GoogleCodeExporter commented 9 years ago

Original comment by irasc...@gmail.com on 7 Feb 2012 at 6:41