Unusual DRC violation (incorrect I believe)

[GoogleCodeExporter]

See image.

Capacitor C7 is conflicting with the traces which are connected to itself.  I 
can't work out why this would be, nothing I do seems to change it.

fzz attached

Original issue reported on code.google.com by bitsybof...@gmail.com on 22 Dec 2013 at 2:39

• Merged into: #2963

Attachments:

• cyb5.png
• 7-seg-control-only.fzz

[GoogleCodeExporter]

I agree this is incorrect. I was able to work around it by deleting the 
capacitor, placing a new one, and redrawing the traces. 

The drc seems to be assigning both traces to C7 connector0 to one net (as 
expected), but is not counting c7 connector0 as part of that net; the same 
applies to the traces to c7 connector1: the traces are one net, yet c7 
connector1 is not. 

Further investigation required.

Original comment by irasc...@gmail.com on 1 Jan 2014 at 4:35

• Changed state: Accepted
• Added labels: Priority-High
• Removed labels: Priority-Medium

[GoogleCodeExporter]

this issue is the happens because there is an capacitor of the same typ on the 
top side and this one is on the bottom side. sending it to the top will stop 
the drc-error message.

Original comment by bluearc....@gmail.com on 4 Aug 2014 at 9:12

• Changed state: Duplicate

Attachments:

• bottomtop-drc-failure.JPG