Current git da4e53f004b30c5530ffde81e083ac6e930c57d3
Open attached fzz "Read Only"
See PCB view has very strange ratlines
See that voltage references are incorrect, labels are all wrong, inspector
values incorrect.
The GREEN POWER one V8 has <property name="voltage" value="9.9"/> in the fz file, but comes up as voltage: 5 in the inspector,
RED POWER V9 should be 6.2 but in inspector is 5
V12 and V11 should be 12v
There are also some various odd ratlines on the schematic (but some of these
are correct - due to my 0-ohm resistor jumpers and other parts which I hadn't
added to the schematic yet).
Selecting to convert the file on opening does work,although boy-howdy does it
make a mess of the schematic :(
Original issue reported on code.google.com by bitsybof...@gmail.com on 28 Jan 2014 at 1:46
Original issue reported on code.google.com by
bitsybof...@gmail.com
on 28 Jan 2014 at 1:46Attachments: